Canon PIXMA MP630 Manuel utilisateur
Getting Started
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
MP630
Symbols■
The following symbols are used to mark important instructions. Observe these instructions.
Instructions that, if ignored, could result in personal injury or material damage.
Instructions that must be observed for safe operation.
Additional explanations.
Descriptions for operations that take some time to complete.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
•
•
•
•Model Number: K10326(MP630)
1
Contents
Check the Included Items
Turn the Power On
Install the Print Head
Install the Ink Tanks
Align the Print Head
Install the Software
Loading Paper
1
2
3
4
5
6
7
After Installing the Machine
2
12 3 4 5 6 7
(C)
(B)
(A)
1
Check the Included Items
(B) 8cm CD-R adapter
(C) CD-R tray
Manuals
Setup CD-ROM
(containing the drivers, applications and
on-screen manuals)
Warranty
MP-101 paper
(for Automatic Print Head Alignment)
•
•
•
•
Before turning on the machine, remove all the orange tapes and the protective sheets.•
Open the Paper Output Tray with your hands, and take out the Print Head.
The Print Head is placed inside of the Paper Output Tray (A).
ink tank
Print Head
power cord
A USB cable is necessary to connect the machine with your computer.•
3
12 3 4 5 6 7
(1)
(2)
(A)
(B)
(C)
(D)
2
23
1
Turn the Power On
Make sure that the Document Cover (C) is closed.•
Do NOT connect the USB cable at this
stage.
•
Plug in the power cord on the left
side at the back of the machine and
connect the other end to the wall
outlet.
Open the Operation Panel (A) then, press the ON button (B)
to turn on the machine.
Use the
{ or }
button (D) on the
Operation Panel to select the language for
the LCD, then press the OK button. The
standby screen is displayed.
The machine may make some operating noises. This is normal
operation.
•
If an unintended language is displayed on
the LCD, press the Back button on the
Operation Panel to return to the Language
selection screen.
•
4
(A)
(B)
(C)
(D)
3
12
Install the Print Head
Close the Document Cover and lift it with the Scanning
Unit (Cover).
• Firmly raise the Print Head Lock Lever until it stops. (The Print
Head Lock Lever may feel heavy.)
•
If the Print Head Holder does not move, make sure that the
machine is turned on.
•
Open the Paper Output Tray (A), then lift the
Scanning Unit (Cover) (B) until it locks into place.
Raise the Print Head Lock Lever (D).
The Scanning Unit (Cover) (B) is fixed automatically.
The Print Head Holder (C) comes out. (This is where you
install the Print Head.)
Do not handle the Print Head
roughly such as applying them
excessive pressure or dropping
them.
•
The Print Head Holder makes a noise as it moves.
This is normal operation.
•
5
1 2 34 5 6 7
(D)
5
4
3
Remove the Print Head from
the silver package.
Remove and discard the orange
protective cap.
Tilt the Print Head and set it in place. Lower the Print Head Lock
Lever (D) completely.
There may be some transparent or light blue ink on the inside of the bag the Print
Head comes in, or the inside of the protective cap - this has no effect on print quality.
Be careful not to get ink on yourself when handling these items. Be careful not to stain
your hands.
•
Do not knock the Print Head against the sides of the Holder.
Be sure to install it in a well-lit environment.
Pinch the Print Head Lock Lever rmly and lower it gently.
Once you have installed the Print Head, do not remove it unnecessarily.
•
•
•
•
6
(1)
(2)
(A)
4
12
Install the Ink Tanks
Do not hold the sides of the ink tank; ink may splash.•
Pull the orange tape (1) in the
direction of the arrow to peel off the
protective film and remove the film
(2) completely.
If the Print Head Holder moves to the right,
close and reopen the Scanning Unit (Cover).
Be sure to use the supplied ink tanks.
•
•
Do not handle the ink tanks roughly such as
applying them excessive pressure or dropping
them.
•
While pressing down with your left thumb, twist off the
orange protective cap (A) located on the bottom of the ink
tank.
7
5 61 2 3 47
5
4
3
Install all the other ink tanks in the same way.
Wait until the screen above appears (about 6
minutes) and go to the next step.
The machine may make some operating
noises when preparing to print. This is
normal operation.
•
•
Install all the ink tanks.
Close the Scanning Unit (Cover).
Make sure all the Ink lamp lights red.•
Once you have installed the ink tanks, do not
remove them unnecessarily.
•
If an error message is displayed on the LCD,
make sure that the Print Head and the ink tanks
are correctly installed.
•
Press the PUSH mark on the ink tank until it
clicks into place.
Make sure the Ink lamp lights red.
Install the Ink Tank
Be sure to install it in a well-lit environment.•
Match the labels when installing.•
8
(A)
(B) (B)
(D)
(C)
5
23
1
Align the Print Head
Align the Print Head for better print results.
This takes about 7 minutes.
Use a sheet of supplied speciality paper
(MP-101) for alignment.
Open the Paper Support
(A) and pull it out.
Load a sheet of supplied speciality paper
(MP-101) in the Rear Tray (D).
Move the Paper Guides
(B) to both edges.
For details, refer to "7 Loading Paper" on page
21.
•
Be sure to use the supplied speciality paper
(MP-101) for Automatic Print Head Alignment.
MP-101 cannot be fed from the Cassette. Load
it in the Rear Tray.
MP-101 has the front and back sides. Load it
with the whiter side facing up.
•
•
•
Make sure that the
Output Tray Extension
(C) is extended.
•
Table des matières
Autres manuels Canon Imprimante
Canon
Canon pixma ip7250 series Manuel utilisateur
Canon
Canon iPF510 - imagePROGRAF Color Inkjet Printer Manuel utilisateur
Canon
Canon MX320 Manuel utilisateur
Canon
Canon MAXIFY GX2000 Series Guide de configuration
Canon
Canon imagePROGRAF iPF8300S Guide de l'utilisateur
Canon
Canon MP638 Manuel utilisateur
Canon
Canon Color Bubble Jet BJC-8200 Manuel utilisateur
Canon
Canon imageCLASS LBP6780dn Manuel utilisateur
Canon
Canon i-SENSYS MF416dw Manuel de service
Canon
Canon MP480 series Manuel utilisateur
Canon
Canon SELPHY CP780 Manuel utilisateur
Canon
Canon imageRUNNER 2545i Manuel utilisateur
Canon
Canon S820D Manuel utilisateur
Canon
Canon PIXMA PRO-200 Manuel utilisateur
Canon
Canon MB2100 Series Manuel utilisateur
Canon
Canon PIXMA iP2000 Series Mode d’emploi
Canon
Canon imageClass LBP6030w Manuel utilisateur
Canon
Canon BJ-200EX Manuel utilisateur
Canon
Canon imagePROGRAF W2200S Manuel utilisateur
Canon
Canon LBP722Cdw Manuel utilisateur
Manuels Imprimante populaires d'autres marques
Ricoh
Ricoh Aficio AP400 Manuel utilisateur
BIXOLON
BIXOLON SRP-352plusV Manuel utilisateur
Epson
Epson Stylus Photo PX700W Instructions de montage
Ricoh
Ricoh SP204SF Manuel utilisateur
Star Micronics
Star Micronics futurePRNT TSP100 Manuel utilisateur
Epson
Epson TM-TM88V-i Manuel d'utilisation et d'entretien