Canon PIXMA MP150 Manuel utilisateur

PIXMA IP Series Printer

Including:

IP1600

Ink CompatibilityPG-40 Black, CL-41 Color

IP1700

Ink CompatibilityPG-40 Black, CL-41 Color

IP1800

Ink CompatibilityPG-30 Black, CL-31 Color

Install cartridge.

Message 1:

“The ink cartridge has been installed or replaced. If the

print out contains misaligned lines or is not satisfactory

after the installation or replacement, refer to the user’s

guide and carry out the print head alignment.”

Click OK to continue. Printer will start printing.

If second message appears and yellow light flashes:

“The following may have run out of color. The function for

detecting the remaining ink level will be disabled since the

ink level cannot be correctly detected. If you want to

continue printing with out this function, press the printer’s

resume button for at least 5 seconds. Canon recommends

using new genuine Canon cartridges in order to obtain

optimum quality. Please be advised that Canon shall not

be liable for any malfunction or trouble caused by continu-

ation of printing under the ink out condition.”

Cancel Printing About ink

Do not click “cancel printing”. Press and hold down

printer resume button until the yellow light disappears and

the green light stays on. Printer will start printing. This

action will bypass the ink level detection from the recycled

cartridge. It will not damage the printer! With a recycled

cartridge this action needs to be done one time.

A full recycled cartridge ink level may not display correctly.

It may show empty.

If you want to check the ink level, you can do a “Nozzle

check” by following the directions below:

Go to menu File select print click on “Property” click

on “Maintenance”

Click on “Nozzle check” to print out the color check.

Click on “Cartridge Alignment” to align the cartridge.

PIXMA MP series printer

Including:

MP150

Ink CompatibilityPG-40 Black, CL-41 Color,PG-50 Black,

CL-51 Color

MP160

Ink CompatibilityPG-40 Black, CL-41 Color, PG-50 Black,

CL-51 Color

MP170

Ink CompatibilityPG-30 Black, CL-31 Color

MP180

Ink CompatibilityPG-40 Black, CL-41 Color, PG-50 Black,

CL-51 Color

Install cartridge.

Message 1:

“The ink cartridge has been installed or replaced. If the print

out contains misaligned lines or is not satisfactory after the

installation or replacement, refer to the user’s guide and

carry out the print head alignment.”

Click OK to continue.

If second message appears and yellow light flashes:

“The following may have run out of color. The function for

detecting the remaining ink level will be disabled since the

ink level cannot be correctly detected. If you want to

continue printing with out this function, press the printer’s

start button. Canon recommends using new genuine Canon

cartridges in order to obtain optimum quality.”

Cancel Printing About ink

Do not click “cancel printing”. Press printer start button

to start printing. This action will bypass the ink level

detection from the recycled cartridge. It will not damage the

printer! With a recycled cartridge this action needs to be

done one time.

A full recycled cartridge ink level may not display correctly.

It may show empty.

If you want to check the ink level, you can do a “Nozzle

check” by follow the directions below:

Go to menu File select print click on “Property” click

on “Maintenance”

Click on “Nozzle check” to print out the color check.

Click on “Cartridge Alignment” to align the cartridge.

Canon Recycled Cartridge Installation & Trouble Shooting

For more information please visit http://www.usa.canon.com/home 10/23/08

CANON MX870 Printer

Error Message

ISSUE:

Recycled PGI-220/CLI-221 cartridge is installed – message displays

‘cartridge is not recognized’.

SOLUTION:

End-users may receive a message from their printer or computer stating the PGI-220 or

CLI-221 cartridge is not recognized by Canon MX870 printer after using the cartridge for

several days. It rarely happens and it only happens on Canon MX870 printer.

To resolve this problem, end-users need to turn off and turn on the printer again or

reinstall the cartridge.



CANON MX870 Printer

Error Message

ISSUE:

Recycled PGI-220/CLI-221 cartridge is installed – message displays

‘cartridge is not recognized’.

SOLUTION:

End-users may receive a message from their printer or computer stating the PGI-220 or

CLI-221 cartridge is not recognized by Canon MX870 printer after using the cartridge for

several days. It rarely happens and it only happens on Canon MX870 printer.

To resolve this problem, end-users need to turn off and turn on the printer again or

reinstall the cartridge.



DEACTIVATE INK LEVEL DETECTION FUNCTION

IMPORTANT TIP: When using a recycled or remanufactured inkjet cartridge, you must deactivate the ink level

feature to allow your printer to run properly each time a recycled cartridge is installed. Check the following

tips to fix the ‘low ink’ error message when the cartridge is initially replaced. The ink level data is stored in the

chip memory; ink level will display correctly each time a new cartridge is installed after this deactivation process

is performed. Below are methods to deactivate the ink level detection function for models indicated.

TIPS, TRICKS AND TROUBLE SHOOTING FOR USING

RECYCLED CARTRIDGES IN CANON PRINTERS

METHOD I:

Press RESUME/CANCEL button once.

Related models:

BJC series: bjc3000, 8200, etc.

S series: s400, 600, 800, 6300, 9000, etc.

i Series: i255, 320, 350, 355, 450, 470d, 550,

560, 850, 950, 6100, 6500, 9100, etc.

Pixma series: ip1000, 1200, 1300, 1500,

1600, 1700, 2000, 2200, 3000, 4000, etc.

METHOD II:

Hold down RESUME/CANCEL button for

5 seconds or more.

Related models:

Latest models of Pixma series: ip1880,

1980, 3300, 3500, 4200, 4500, 5200, 6700d,

pro9000, 9500, ix4000, 5000, etc.

METHOD III:

Press START button once, select COLOR

button for color cartridge; BLACK button for

black cartridge.

Applicable models:

Pixma MP150, 160, 170, 180, 450, 460,

475, etc.

METHOD IV:

Hold down STOP/RESET button for

5 seconds or more.

Applicable models:

Latest models of Pixma MP/MX series:

MP145, 228, 240, 250, 520, 800, 850, 970,

MX308, 310, 318, 7600, etc.

Receive Fax Document After Deactivating

‘Ink Level Detection’ Function

Related models:

Canon Pixma MX Series MX308, 318, 700,

7600, etc.

You can immediately copy or print received

documents from the computer after deacti-

vating the Ink Level Detection function. By

default setting, printing fax documents in

‘low ink’ or ‘ink level unknown’ condition is

set at OFF. This prevents the user from

printing a blank page. Incoming faxed

documents are received and held in

memory. To print or delete the document(s),

access the MEMORY REFERENCE menu

by following these steps:

Press MENU button until FAX SETTING appears.

Select RX SETTING, press Ok.

Auto Print RX : ON, press Ok.

Print When No Ink: ON, press Ok.

Ink level detection is not activated. Cartridge can

run out of ink.

Description: Low Ink Warning / Ink Runs Out

Blinking in Orange: 4 times

Related models:

Canon bjc series: bjc3000, 6200

Canon s series: s300, 400, 450, 4500, 520,

600, 820, 6300, 9000.

Canon i series: i250, 255, 320, 355, 450,

455, 550, 560, 6100, 6500, 850, 865, 905d,

950, 9100.

Canon pixma series: ip1000, 1200, 1300,

1500, 1600, 1700, 1800, 1880, 2580, 3000,

3300, 3500, 4000, 4200, 4500, 5200, 6000d,

6230d, 6600d, 6700d, ix4000, 5000,

pro 9000, 9500.

Rev. 04/29/10