Canon LBP1760P Manuel utilisateur

SERVICE

MANUAL

REVISION 0

RY8-1387-000

MAY 1998

LBP-1760

Printed in Japan

Imprimé au Japon

Use of this manual should be

strictly supervised to avoid

disclosure of confidential

information.

Prepared by

PERIPHERAL PRODUCTS QUALITY ADVANCEMENT DIV.

PERIPHERAL PRODUCTS TECHNICAL DOCUMENTATION DEPT.

CANON INC.

5-1, Hakusan 7-chome, Toride-City, Ibaraki-Pref. 302-8501, Japan

PREFACE

This Service Manual contains basic information required for after-sales service of the laser beam

printer LBP-1760 (here after referred to as the “printer”). This information is vital to the service

technician in maintaining the high print quality and performance of the printer.

The paper feeder, envelope feeder and duplexing unit, which are prepared for the printer as

options, are described in this manual.

This manual consists of the following chapters:

Chapter 1: Product information

Features, specifications and installation

Chapter 2: Operation and Timing

A description of the operating principles and timing sequences of the electrical and

mechanical systems

Chapter 3: The Mechanical System

Explanation of mechanical operation, disassembly, reassembly and adjustment pro-

cedures

Chapter 4: Troubleshooting

Troubleshooting procedures, reference values and adjustments, maintenance and

servicing, etc.

Appendix: General timing chart, general circuit diagram, etc.

Information in this manual is subject to change as the product is improved or redesigned. All

relevant information in such cases will be supplied in the Service Information Bulletins.

A thorough understanding of this printer, based on information in this Manual and Service

Information bulletins, is required for maintaining its performance and for locating and repairing

the causes of malfunctions.

DTP system

This manual was produced on an Apple PowerMacintosh 9500/200 personal computer and output by an

Apple LaserWriter 16/600 PS laser beam printer.

All graphics were produced with Macromedia FreeHand (J), and all documents and page layouts were

created with QuarkXPress (E).

The video images were captured with SONY degital video camcorder and MASS microsystems

Quickimage 24 video capture board, and modified with Adobe Photoshop(J).

CONTENTS
CHAPTER 1 PRODUCT INFORMATION
I. FEATURES ............................. 1-1
II. SPECIFICATIONS.................... 1-3
III. SAFETY INFORMATION..... 1-6
IV. PARTS OF THE PRINTER ....... 1-7
V. INSTALLATION ....................... 1-12
VI. MAINTENANCE AND
SERVICING BY THE
CUSTOMER ............................ 1-19
VII. OPERATION............................ 1-20
CHAPTER 2 OPERATION AND TIMING
CHAPTER 3 THE MECHANICAL SYSTEM
I. BASIC OPERATION................. 2-1
A. Functions.......................... 2-1
B. Basic Operation Sequences 2-2
C. Power ON Sequence........... 2-3
II. ENGINE CONTROL SYSTEM.... 2-4
A. Engine Controller PCB....... 2-4
B. Fixing Control ................... 2-10
C. High-Voltage Power Supply
Circuit............................... 2-14
D. Low-Voltage Power Supply
Circuit............................... 2-16
E. Video Interface Control ..... 2-17
F. Other Controls .................. 2-20
III. LASER/SCANNER SYSTEM..... 2-22
A. Outline.............................. 2-22
B. Laser Control Circuit......... 2-23
C. Scanner System ................ 2-26
IV. IMAGE FORMATION SYSTEM . 2-28
A. Outline.............................. 2-28
B. Printing Process ................ 2-30
V. PICK-UP/FEED SYSTEM......... 2-38
A. Outline.............................. 2-38
B. Paper Size Detection ......... 2-40
C. Cassette Pick-up................ 2-41
D. Multi-purpose Tray
Pick-up.............................. 2-44
E. Fixing and Delivery Unit.... 2-46
F. Paper Jam Detection ......... 2-48
VI. VIDEO CONTROL SYSTEM...... 2-50
A. Video Controller Circuit .... 2-50
B. Adapter Circuit.................. 2-52
C. Operation Panel................. 2-55
D. Self Test............................ 2-56
VII. PAPER FEEDER...................... 2-58
A. Outline.............................. 2-58
B. Pick-up and Feeding.......... 2-59
C. Paper Jam Detection......... 2-62
VIII.ENVELOPE FEEDER ............... 2-63
A. Outline.............................. 2-63
B. Pick-up and Feeding.......... 2-64
C. Paper Jam Detection......... 2-67
IX. DUPLEXING UNIT ................... 2-68
A. Outline.............................. 2-68
B. Reversing and duplexing
unit Pick-up ...................... 2-70
C. Paper Jam Detection......... 2-74
I. EXTERNALS ........................... 3-1
A. External Covers................. 3-1
B. Pick-up Module.................. 3-5
C. Cooling Fan....................... 3-6
D. Operation Panel................. 3-7
II. DRIVE SYSTEM ...................... 3-8
A. Drive Unit ......................... 3-8
B. Main Motor........................ 3-9
C. Pick-up Drive Unit............. 3-10
III. PAPER TRANSPORT SYSTEM . 3-11

A. Cassette Pick-up Roller ..... 3-11
B. Cassette Feed Roller.......... 3-11
C. Separation Roller .............. 3-12
D. Multi-purpose Tray
Pick-up Roller ................... 3-12
E. Separation Pad .................. 3-13
F. Multi-purpose Tray Unit .... 3-14
G. Registration Unit............... 3-15
H. Feed Roller Unit ................ 3-17
I. Feed Guide Unit ................ 3-18
J. Delivery Unit..................... 3-18
IV. EXPOSURE SYSTEM............... 3-19
A. Laser/Scanner Unit ........... 3-19
V. ELECTROSTATIC IMAGING/
DEVELOPING/CLEANING
SYSTEM ................................. 3-20
A. EP-52 Cartridge................. 3-20
B. Transfer Charging Roller ... 3-21
VI. FIXING SYSTEM ..................... 3-23
A. Fixing Unit ........................ 3-23
VII. PRINTED CIRCUIT BOARDS ... 3-27
A. Engine Controller PCB....... 3-27
B. Paper Size Detection PCB.. 3-28
C. Video Controller PCB......... 3-29
D. Adapter PCB ...................... 3-30
VIII.PAPER FEEDER...................... 3-31
IX. ENVELOPE FEEDER ............... 3-35
X. DUPLEXING UNIT ................... 3-39
CHAPTER 4 TROUBLESHOOTING
I. PREFACE ............................... 4-1
A. Malfunction Diagnosis
Flowchart .......................... 4-1
B. Initial Check ..................... 4-4
C. Test Print.......................... 4-5
II. IMAGE DEFECTS.................... 4-10
III. PAPER JAMS
TROUBLESHOOTING .............. 4-16
IV PAPER TRANSPORT
TROUBLESHOOTING .............. 4-22
V. MALFUNCTION
TROUBLESHOOTING .............. 4-24
VI. MALFUNCTION STATUS
TROUBLESHOOTING .............. 4-25
VII. MEASUREMENT AND
ADJUSTMENT ........................ 4-34
A. Mechanical Adjustment ..... 4-34
B. Electrical Adjustment........ 4-38
C. Variable Resisters, LEDs, 
Test Pins, Jumpers and 
Switches on PCBs.............. 4-40
VIII.MAINTENANCE AND
SERVICING............................. 4-43
A. Periodic Replacement
Parts ................................ 4-43
B. Expected Service Life of
Consumable Parts.............. 4-43
C. Periodic Service ................ 4-43
D. Cleaning Points for
Servicing .......................... 4-44
E. Standard Tools .................. 4-46
F. Special Tools ..................... 4-47
G. Printer driver tester .......... 4-48
H. Solvents and Oil List ......... 4-55
IX. LOCATION OF ELECTRICAL
PARTS.................................... 4-56
A. Switches............................ 4-56
B. Sensors ............................. 4-58
C. Clutches/Solenoids ........... 4-60
D. Motors/Others................... 4-62
E. PCBs.................................. 4-64
F. Connectors........................ 4-66

APPENDIX

I. GENERAL TIMING CHART ...... A-1

II. GENERAL CIRCUIT DIAGRAM A-3

III. LIST OF SIGNALS................... A-5

IV. MESSAGE TABLE ................... A-11

CHAPTER 1

PRODUCT INFORMATION

I. FEATURES ............................. 1-1

II. SPECIFICATIONS.................... 1-3

III. SAFETY INFORMATION..... 1-6

IV. PARTS OF THE PRINTER ....... 1-7

V. INSTALLATION ....................... 1-12

VI. MAINTENANCE AND

SERVICING BY THE

CUSTOMER ............................ 1-19

VII. OPERATION............................ 1-20

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante

Canon

Canon Color Bubble Jet BJC-3000 Series Manuel utilisateur

Canon

Canon G1030 Series Manuel utilisateur

Canon

Canon MP21DV Manuel utilisateur

Canon

Canon 3433B010 Guide de l'utilisateur

Canon

Canon Satera LBP-3700 Manuel utilisateur

Canon

Canon Pixma MX515 Manuel utilisateur

Canon

Canon PIXMA MG7120 Mode d’emploi

Canon

Canon CX 350 Manuel utilisateur

Canon

Canon I450 - i 450 Color Inkjet Printer Manuel

Canon

Canon iPF671 Manuel utilisateur

Canon

Canon PIXMA MX7600 Manuel utilisateur

Canon

Canon Pro9500 Mark II Series Manuel utilisateur

Canon

Canon i470D Series Manuel utilisateur

Canon

Canon PIXMA MG5600 Series Manuel utilisateur

Canon

Canon PIXMA TS6050 Guide de configuration

Canon

Canon N 1000 Manuel utilisateur

Canon

Canon MF832Cdw Manuel utilisateur

Canon

Canon Laser Class 810 Manuel utilisateur

Canon

Canon PIXMA G7010 Manuel utilisateur

Canon

Canon SELPHY ES30 Manuel utilisateur

Canon

Canon iB4100 series Guide de configuration

Canon

Canon imageRUNNER 3245 Series Manuel utilisateur

Canon

Canon TS7450i Series Manuel utilisateur

Canon

Canon i850 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien