Canon BW Remote Operators Software Kit-A1 Manuel d'utilisation et d'entretien

Feb 21 2005

Installation Procedure

Canon BW

Remote Operators Software Kit-A1

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and

repair of products. This manual covers all localities where the products are sold. For this reason, there may be

information in this manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.

When changes occur in applicable products or in the contents of this manual, Canon will release technical information

as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will

issue a new edition of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered trademarks of the individual companies.

reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.

Printed in Japan

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Introduction

Symbols Used

This documentation uses the following symbols to indicate special information:

Symbol Description

Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning.

Indicates an item requiring care to avoid electric shocks.

Indicates an item requiring care to avoid combustion (fire).

Indicates an item prohibiting disassembly to avoid electric shocks or problems.

Indicates an item requiring disconnection of the power plug from the electric outlet.

Indicates an item intended to provide notes assisting the understanding of the topic in question.

Indicates an item of reference assisting the understanding of the topic in question.

Provides a description of a service mode.

Provides a description of the nature of an error indication.

Memo

REF.

Introduction

The following rules apply throughout this Service Manual:

1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical

and mechanical systems with reference to the timing of operation.

　In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol ,

the arrow indicates the direction of the electric signal.

　The expression "turn on the power" means flipping on the power switch, closing the front door, and closing the

delivery unit door, which results in supplying the machine with power.

2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is "High", while '0' is used to

indicate "Low".(The voltage value, however, differs from circuit to circuit.) In addition, the asterisk (*) as in

"DRMD*" indicates that the DRMD signal goes on when '0'.

　In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field. Therefore, the

operations of the microprocessors used in the machines are not discussed: they are explained in terms of from

sensors to the input of the DC controller PCB and from the output of the DC controller PCB to the loads.

The descriptions in this Service Manual are subject to change without notice for product improvement or other

purposes, and major changes will be communicated in the form of Service Information bulletins.

All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant

Service Information bulletins and be able to identify and isolate faults in the machine."

Contents

第1章　Installation Procedure

1.1 Installation procedure ............................................................................................................................................ 2

1.1.1Overview of the Installation Procedure........................................................................................................... 2

Contents

Chapter 1　Installation

Procedure

Chapter 1

1.1 Installation procedure

1.1.1 Overview of the

Installation Procedure 0008-5793

As a rule, the user is expected to obtain a license key

and register it to the device. Detailed instructions are

found in the User's Guide. The following is an outline

of the instructions:

1. Using the following URL, access the LMS, and

obtain the license key by following the instructions

shown on the screen:

http://www.canon.com/lms/ir/

Memo:

A license key is issued in exchange for the 24-digit

number indicated on the License Access Number

Certificate and the serial number of the device (e.g.,

ABC01234) to which the license will be registered.

The device serial number will be indicated in

response to a press on the Counter key on the iR

device (under [Serial Number]).

2. Copy the 24-digit number shown on the Web

browser screen in the space given for the purpose on

the License Access Number Certificate sheet.

Caution:

Be sure to double-check the number to avoid an

error. Be sure that the user is aware of the

importance of the License Access Number

Certificate and that it must be stored away in a safe

place.

3. Make the following selections: user mode>system

control setup>license control. Then, type in the 24-

digit number, and click [Execute]. In response, the

license key will be registered and the appropriate

functions will be enabled. Otherwise, any of the

following error messages will appear:

"The number of the license key is not correct. Check

the license key."

>> Make sure that the license key is not issued for a

different device.

>> Make sure that the number has been correctly

typed in.

>> Make sure that the license key is the correct one.

"The function has already been enabled."

>> Make sure that the Kit has not already been

enabled.

4. Hold down the control panel power switch for 3 sec

or more. Follow the instructions shown on the screen

for shut-down sequence so that the main power switch

may be turned off. Turn off the main power switch,

wait for 10 sec, and turn it back on.

5. The registered license will become valid when the

device is turned back on. When it has started

normally, press the Counter key, and click the Device

Configuration button to make sure that the Kit is

indicated as part of the options.

Autres manuels pour BW Remote Operators Software Kit-A1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Accessoires pour imprimantes

Canon

Canon AD1 Manuel utilisateur

Canon

Canon DADF-M1 Manuel utilisateur

Canon

Canon AD2 Manuel utilisateur

Canon

Canon Duplex Unit-A1 Manuel d'utilisation et d'entretien

Canon

Canon Duplex Unit-A1 Manuel de service

Canon

Canon Finisher-T1 Manuel utilisateur

Canon

Canon Inner Finisher-K1 Manuel utilisateur

Canon

Canon Buffer Pass Unit-N1 Manuel utilisateur

Canon

Canon Finisher-T1 Manuel utilisateur

Canon

Canon iP4000 - PIXMA Photo Printer Manuel utilisateur

Canon

Canon AS-AN11 Manuel utilisateur

Canon

Canon Color Network UFR Printer Kit-C1 Manuel utilisateur

Canon

Canon imagePROGRAF SD-33 Manuel utilisateur

Canon

Canon NP6412 Manuel utilisateur

Canon

Canon INNER 2-WAY TRAY-E1 Manuel d'utilisation et d'entretien

Canon

Canon Color UFRII Printer Kit-L1 Manuel utilisateur

Canon

Canon DADF-M1 Manuel utilisateur

Canon

Canon imagePROGRAF iPF830 Manuel utilisateur

Canon

Canon DADF-P1 Manuel utilisateur

Canon

Canon UFRII LT PRINTER KIT-J2 Manuel d'utilisation et d'entretien

Canon

Canon Two-Knife Booklet Trimmer-A1 Manuel utilisateur

Canon

Canon Remote FAX Kit-A1 Manuel utilisateur

Canon

Canon FY8-13HR-000 Manuel utilisateur

Canon

Canon Finisher-R1 Manuel d'utilisation et d'entretien

Manuels Accessoires pour imprimantes populaires d'autres marques

Star Micronics

Star Micronics TSP800 Series Manuel utilisateur

REA

REA JET HR pro 2K Manuel utilisateur

HP Laserjet,Color Laserjet 4si Manuel utilisateur

oliser

oliser MS 45 Manuel utilisateur

Roland

Roland DU2-64 Instructions et recettes

Xerox

Xerox EFI EXP6000 Manuel utilisateur

Sharp

Sharp FO-1MK Manuel utilisateur

Labelmate

Labelmate PM-300 Manuel utilisateur

Epson

Epson T6248 Manuel d'utilisation

Epson

Epson OT-BZ20 Manuel utilisateur

Ricoh

Ricoh LCIT RT5100 Guide de démarrage rapide

GBC

GBC 16 Series Manuel utilisateur

Develop

Develop SD-509 Manuel utilisateur

Kyocera

Kyocera KM-6230 Manuel

Triumph Adler

Triumph Adler DF-710 Manuel

Citizen

Citizen CBM-202PC Series Manuel utilisateur

Codonics

Codonics Virtua 1VCX-LR833 Guide de référence

TonerRefillKits

TonerRefillKits ReChargX RX126 Manuel utilisateur