Canon PowerShot G16 Mode d’emploi

Autres manuels pour PowerShot G16

1

Table des matières

Autres manuels Canon Appareil photo numérique

Canon

Canon 2663B001 Manuel utilisateur

Canon

Canon PowerShot A720 IS Manuel utilisateur

Canon

Canon EOS REBEL T7 Manuel

Canon

Canon SD400 - PowerShot Digital ELPH Camera Manuel utilisateur

Canon

Canon PowerShot A720 IS Manuel utilisateur

Canon

Canon EOS 60D Manuel utilisateur

Canon

Canon Digital IXUS55 Manuel utilisateur

Canon

Canon PowerShot A95 Manuel utilisateur

Canon

Canon PowerShot SX50 HS Manuel utilisateur

Canon

Canon PowerShot G7X Manuel utilisateur

Canon

Canon SURE SHOT 90u Manuel utilisateur

Canon

Canon EOS Rebel T1i Manuel utilisateur

Canon

Canon EOS 10D Digital Instructions de montage

Canon

Canon Digital IXUS 100 IS Manuel utilisateur

Canon

Canon NEW F-1 Manuel utilisateur

Canon

Canon EOS M2 Guide d'installation

Canon

Canon DIGITAL IXUS i5 PowerShot SD20 Manuel utilisateur

Canon

Canon EOS Rebel SL1 18-55mm IS STM Kit Manuel utilisateur

Canon

Canon 2756B003 Manuel utilisateur

Canon

Canon Power Shot SX710 HS Manuel utilisateur

Canon

Canon EOS 60D Manuel utilisateur

Canon

Canon PowerShot G2 Mode d’emploi

Canon

Canon PowerShot S3 IS Digital Camera Manuel d'utilisation et d'entretien

Canon

Canon PowerShot SX1 IS Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Nikon

Nikon Coolpix 100 Manuel utilisateur

PowerShot G16 Sending still images and movies between two

Canon-brand cameras (Wi-Fi function)

You can connect two cameras via Wi-Fi and send images between them as follows.

NOTE

•Only Canon-brand cameras equipped with a Wi-Fi function can be connected to

wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be

connected to if they do not have a Wi-Fi function. You cannot connect to

PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS

cameras with this camera.

•Up to 50 images can be sent together at once. You can send movies together as

long as the total playback time is within two minutes. However, Web services

may limit the number of images you can send. For details, refer to the Web

service you are using.

•Depending on the condition of the network you are using, it may take a long time

to send movies. Be sure to keep an eye on the camera battery level.

Connecting the cameras wirelessly

Perform the following operations on both of the cameras to be connected.

1. Press the <Playback> ( ) button on the camera.

2. Press the <Wi-Fi> ( ) button.

NOTE

When making the settings for a wireless LAN for the first time, a screen will appear for you to

register a nickname for the camera.

Press the <FUNC./SET> ( ) button, enter a nickname using the keyboard. This nickname will

appear on other devices on the wireless LAN when connecting from them.

3. Press the < >< >< >< > buttons to choose ( ), and then press the <FUNC./SET> (

) button.

4. Press the < >< > buttons to choose [Add a Device], and then press the <FUNC./SET> (

) button.

NOTE

•If you register a camera, that camera's name will appear on the screen in step 4. From the

second time onward, select the camera's name to make the connection.

5.The following screen appears.

Follow steps 1 4 on the target camera too.

Camera connection information will be added when [Start connection on target camera] is

displayed on both camera screens.

Once the other camera is registered, the screen for sending images will appear. Please see step 7

and later steps for instructions on how to send images.

6. Once both cameras are connected, a screen like the one below will appear.

NOTE

•Once you have connected to devices via Wi-Fi, recent destinations will be listed first

when you access the Wi-Fi menu by pressing the < >button. You can easily connect

again by pressing the < >< > buttons to choose the device name. To add a new device,

display the device selection screen by pressing the < >< > buttons, and then configure

the setting. If you prefer not to display recent target devices, press the <MENU > button,

and on the [ ] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

•To add multiple cameras, repeat the above procedures starting from step 2.

Sending Images to a Camera Individually

7. Press the < >< > buttons to choose [Send this image], and then press the <FUNC./SET> (

) button.

NOTE

•You can choose the resolution (size) of images to send by pressing the < >< >

buttons.

•Movies cannot be resized.

8. The following screen appears.

After sending images to the target camera, [Transfer completed] will be displayed, and the

camera returns to the screen shown in step 7.

Sending Multiple Images to a Camera

9. Press the < >< > buttons to choose [Select and send], and then press the <FUNC./SET> (

) button.

10. The following screen appears.

Press the < >< >< >< > buttons to choose an image to send, and then press the

<FUNC./SET> ( ) buttons.( ) will be displayed.

To cancel selection, press the <FUNC./SET> ( ) button again. ( ) is no longer displayed.

You can also choose images in step 2 by moving the zoom lever twice toward ( ) to access

single-image display and then pressing the < >< > buttons.

After you finish choosing images, press the <MENU> button.

11. The following screen appears.

Press the < >< > buttons to choose [Send], and then press the <FUNC./SET> ( ) button.

After [Transfer completed] is displayed, the camera returns to the screen shown in step 7.

NOTE

•You can choose the resolution (size) of images to send by pressing the < >< >

buttons.