Canon Pz-e1 Manuel utilisateur

Canon

POWER

ZOOM

ADAPTER

PZ-E1

Instructions

Mode

emploi

nstrucciones

Thank you for purchasing a Canon product.

The Canon POWER ZOOM ADAPTER PZ-E1

accessory

that

allows

powered

zooming

when

attached

lens

for

EOS cameras*.

Before use, please read this instruction manual as well

as the instruction manual for your camera and lens.

There may be warnings regarding shooting listed

them.

EOS cameras

(as

February

.35rnm f/3.5-5.6 IS USM

Warning

Prevt:Jnf

adapter, lens, or camera

malfunction,

d@mage.

Supplement~Jj

notes on using the adapter.

ENG-1

Safety Precautions

Precautions to ensure that the camera

used safely.

Read these precautions thoroughly. Make sure all

details are observed

order to prevent risks and injury

to the user and other people.

Warning

Detail~

pertaining

~isks

~h_at

may

result

death or serrous

InJury.

• Care must be taken with the batteries used

the product, as follows. They may produce heat,

smoke, flame, or leak or burst, causing fires or

injuries.

•

not use batteries with a nominal voltage

excess

1.5 V or where the nominal voltage

cannot be confirmed.

•

not mix battery brands or use old and new

batteries together.

• Make sure you put the batteries

the right way

around.

•

not disassemble batteries, recharge them

(unless rechargeable), leave them

hot places,

apply heat to them, short out their terminals, or

throw them

a fire.

• When using some brands

AAA lithium batteries,

there may be rare cases when the battery gets

extremely hot. For safety's sake, please do not use

AAA lithium batteries.

ENG-2

• Do not allow the product to maintain contact with

the same area of skin for extended periods

time

during use. This may result

low-temperature

contact burns, including skin redness and blistering,

even if the product does not feel hot. The use

tripod or similar equipment

recommended when

using the product

hot places and for people with

circulation problems or less sensitive skin.

~Caution

Details pertaining to risks that

may result

injury.

• There

the risk

getting your finger or hair caught

between the lens zoom ring and the product. Take

care when using the product.

• If internal fluid such as battery leaks get

you,

wash it off thoroughly with water.

not rub your

eyes or mouth while you have fluid on your hands.

Safety Precautions

Caution

Details pertaining to risks that may

result

damage to property.

• This is a precision instrument.

not drop

it,

subject it to shock, or attempt to dismantle

yourself.

• When carrying a lens or a camera to which the

adapter

attached, always carry it by the lens/

camera body.

•

not leave the adapter

excessive heat such as

a car

direct sunlight. High temperatures can

cause the adapter to malfunction.

• Remove the battery when you are not using the

adapter. Fluid leakage can cause the adapter to

malfunction.

General Precautions

Handling Precautions

• If the adapter is taken from a cold environment

into a warm one, condensation may develop

the outside surface and internal parts.

prevent

condensation

this case, first put the adapter into

airtight plastic bag before taking it from a cold

to warm environment. Then take out the adapter

after it has warmed gradually.

the same when

taking the adapter from a warm environment into a

cold one.

Shooting Precautions

• When using the power zoom, the lens will stop

before the limit at both the wide and telephoto

ends. The available focal length range is limited.

The focal length range where the power zoom can

used differs for each lens. Refer to "Materials"

Page 1

0 for details.

• Attaching the camera to a tripod may cause

interference with the adapter. If this is the case,

please use the separately-sold TS-E Lens Tripod

Adapter.

ENG-3

This device complies with Part 15

the FCC Rules. CAN ICES-3 (B) I NMB-3 (B)

~peration

su~ect

to the following two conditions: (1) This

~~~~~~~~~~~~~~~~~~~~~~~

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes

modifications to the equipment

unless otherwise specified

the instructions.

such

changes or modifications should be made, you could be

required to stop operation

the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more

the following measures:

• Reorient

relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

ENG-4

Nomenclature

Gear(~

r---------

Fixed mounting catch

Jam detector

-.-----.

(~9,10)

r----

Battery compartment

cover(~

Zoom

lever(~

Speed level

switch(

...-------Control

contacts(~

.-----

Movable mounting catch (

Attach/Detach lever

Indicator lamp

10)

Zoom mode switch

• The numbers in the parentheses refers to the reference page.

ENG-5

Inserting and

Removing Batteries

Open the battery compartment by sliding the cover

the direction

the arrows. (Fig.

CD®

)

Insert (or remove) the batteries, making sure that

they are

the correct direction (see diagram inside

cover). (Fig.

After closing the battery compartment, slide the

cover

the direction

the arrow until it clicks. (Fig.

CD®

)

0 Non-alkaline

AAA

batteries lack unified standards

for contact point shapes, so the brand you use may

cause problems with contact.

ENG-6

Removing

and

Attaching

Protective Cover

• Removing

1. Turn the attach/detach lever

the direction

the

arrow ® while pressing down on the attach/detach

lever lock release button.

(CD®)

2. Remove the protective cover from the movable

mounting catch. (@)

• Attaching

1. Attach the protective cover to the adapter

the

reverse order for removing it.

Turn the attach/detach lever

the direction

the

arrow

until it clicks to fasten the cover to the

adapter. (@)

Attaching and Removing Adapter

• Attaching

Line up the fixed mounting catch and the movable

mounting catch at the sockets for attaching the

power zoom adapter on the lens and hold it against

the lens. (Fig.

CD®®

)

Turn the attach/detach lever

the direction

the

arrow until it clicks to fasten the adapter to the lens.

(Fig.

0 * Pay attention to the orientation

the adapter

vis-a-vis the lens.

* This adapter will not function if the lens is not

attached to the camera body.

• Removing

Hold

the

adapter firmly and turn the attach/detach lever

the

direction of the arrow while pressing down

the

attach/detach lever lock release button. (Fig. 8:

CD®

)

Remove the adapter from the lens

the reverse

order for attaching it.

Do not use excess force in attaching or

removing the adapter. It can cause it to break

malfunction.

* Take care not to damage the control contacts

or the gear when you remove the adapter. Also

remember to attach the protective cover.

Any damage, dirt, fingerprints, etc. on the control

contacts can cause poor contact

corrosion,

leading to operational problems. Any dirt on the

contacts should be wiped off with a soft cloth.

ENG-7

Setting Zoom Mode

1. The zoom mode switch can be set to either Power

Zoom [PZ] or Manual Zoom [MZ].

zoom using power zooming, set the switch to

Power Zoom [PZ].

zoom by directly turning the zoom ring on the

lens, set the switch to Manual Zoom [MZ].

llJ

The indicator lamp goes off when set to Manual

Zoom [MZ].

0 Do not force the zoom ring on the lens when using

the Power Zoom [PZ] zoom mode. It can cause

damage to the lens.

ENG-8

Setting Speed Level

• Use the speed level switch to set the speed

the

power zoom.

• Setting this to [SLOW] provides a slow zoom, suitable

for movie photography.

Setting this to [FAST] provides a faster zoom than

[SLOW].

Using Power Zoom

Use the zoom lever to use the power zoom. Sliding it to

[W] will zoom the lens out (wide end) and sliding it to

(T]

will zoom the lens

(telephoto end).

The zoom speed will change depending

how much

the zoom lever is moved. Refer to "Materials"

Page

10 for details

the zoom speeds.

llJ

You

can use power zooms by remote control when

using this adapter. Refer to "Materials" on Page

for details

remote control.

0 ®

If a foreign object is caught between the lens's

zoom ring and the adapter while power zoom is

being used, it will stop after the motor drives it to

expel the object.

You

cannot use Power Zoom

while the jam detector is pressed.

When using Power Zoom from the telephoto end

to the wide end, take care that you do not get

your fingers caught between the adapter and the

tip

the lens

the lens hood.

The motor noise may be recorded when using

Power Zoom during video shooting. Setting the

speed level to [SLOW] will reduce the motor

noise.

® There may be some slight sounds from the

adapter when the camera is turned on or wakes

up from Auto Power Off.

While using the zoom lever, do not apply force

the direction where the adapter parts from the

lens. It can cause abnormal sounds or damage.

ENG-9

Autres manuels pour pz-e1

Autres manuels Canon Accessoires pour appareils photo

Canon

Canon Digital ELPH Manuel utilisateur

Canon

Canon BG-R10 Manuel utilisateur

Canon

Canon RF85/1.2 L USM Manuel utilisateur

Canon

Canon Extender EF 1.4X III Manuel utilisateur

Canon

Canon IMAGE STABILIZER EF70-200MM F/4L IS USM Manuel utilisateur

Canon

Canon REBEL 350D Manuel utilisateur

Canon

Canon EF 20mm f/2.8 USM Manuel utilisateur

Canon

Canon FOCUSING RAIL Mode d’emploi

Canon

Canon Puncher Unit-BS1 Manuel utilisateur

Canon

Canon EF Adapter XL Manuel utilisateur

Canon

Canon RS-80N3 Manuel utilisateur

Canon

Canon Speedlite 299T Manuel utilisateur

Canon

Canon pz-e1 Manuel utilisateur

Canon

Canon Macro Twin Light MT-26EX-RT Instructions de montage

Canon

Canon Control Ring Mount Adapter EF-EOS R Manuel utilisateur

Canon

Canon ANGLE FINDER C Mode d’emploi

Canon

Canon AE Motor Drive FN Manuel utilisateur

Canon

Canon EF100mm f/2 USM Manuel utilisateur

Canon

Canon EF 600mm 1:4.0 L USM Mode d’emploi

Canon

Canon BG-EB Manuel utilisateur

Canon

Canon F-1 Manuel utilisateur

Canon

Canon EXTENDER EF 2.0x Mode d’emploi

Canon

Canon MA-200 Manuel utilisateur

Canon

Canon MiniTT1 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur