Canon XF300 Manuel utilisateur

This plugin was created to allow you to easily transfer the clips you recorded using the camcorder to Apple's Final

Cut Pro non-linear editing system. This plugin is compatible with Apple’s Final Cut Pro, version 6.0.3 or later*.

* As of March 2010, Final Cut Pro does not support clips recorded with the following video configurations: 쐃50 Mbps (4:2:2), 1280x720, 30P;

쐇50 Mbps (4:2:2), 1280x720, 25P; 쐋50 Mbps (4:2:2), 1280x720, 24P.

Transferring clips directly from the camcorder or from a CF card

You can transfer clips to Final Cut Pro directly from a CF card inserted into a card reader connected to your

computer. You can also connect the camcorder to the computer using a USB cable to import clips directly from the

camcorder.

For details about transferring file-based media to Final Cut Pro, refer to Final Cut Pro User Manual.

1. Start up Final Cut Pro.

2. Connect the camcorder or the CF card to the computer.

•CF card: Connect a commercially available card reader compatible with CompactFlash memory cards to the

computer and insert the CF card into the card reader.

• Camcorder:

햲Power the camcorder using the compact power adapter.

햳Turn on the camcorder and set in MEDIA mode.

햴Connect the camcorder to the computer using a USB cable. Use the optional IFC-400PCU USB cable or

similar mini-B USB cable.

3. Click File > Log and Transfer to open the Log and Transfer window.

4. Choose a destination codec for the transferred clips.

Select Preferences in the Browse area of the Log and Transfer window and select the target format (the format

for transcoding) Canon XF MPEG-2 files.

5. Add the desired clips to the Transfer Queue.

•To add only part of a clip: Select the desired clip from the Browse area, set the In point and Out point as

necessary in the Preview area and click the Add Clip to Queue button.

To add multiple clips: Select the desired clips in the Browse area and click Add Selection to Queue.

• The clips in the Transfer Queue will be transferred automatically and saved with the latest project.

6. Close the Log and Transfer window.

7. Drag the icon of the CF card in the card reader or the icon of the camcorder to the trash can icon to safely

eject the media and then disconnect the card reader or camcorder.

Macintosh

Canon XF Plugin for Final Cut Pro Version 1.0

Instructions

COPY

IMPORTANT

• Please observe the following precautions. Failing to do so may result in permanent data loss.

While a CF card is connected to the computer:

- Do not remove the CF card or the CF card reader.

- Do not access, change or delete any of the CF card’s folders or files directly from the computer. Always access

the files on the CF card only using the procedure described above.

When the camcorder is connected directly to the computer:

- Do not open any of the CF card slot covers and do not remove the CF cards.

- Do not disconnect the USB cable.

- Do not turn off the camcorder or the computer.

NOTES

• Use of a commercially-available, UDMA-compatible card reader is recommended.

• Depending on the system used (the computer’s performance specifications, transfer rate of the CF card, etc.),

transferring the clips can take some time.

Trademark Acknowledgements

• Apple, Macintosh, Mac OS and Final Cut Pro are trademarks of Apple Inc., registered in the U.S. and other coun-

tries.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective

companies.

PUB. DIE-0360-000 © CANON INC. 2010

COPY

Autres manuels pour XF300

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon caméscope

Canon

Canon MVX3 Manuel utilisateur

Canon

Canon VIXIA HF G10 Manuel utilisateur

Canon

Canon UC 7500 Manuel utilisateur

Canon

Canon EOS C100 Guide de l'utilisateur

Canon

Canon UC 5500 Manuel utilisateur

Canon

Canon MVX25i Manuel utilisateur

Canon

Canon VIXIA HF R400 Manuel utilisateur

Canon

Canon VM-E70 Manuel utilisateur

Canon

Canon imageRunner 60 Manuel utilisateur

Canon

Canon LEGRIA FS 46 Manuel utilisateur

Canon

Canon XA40 Manuel utilisateur

Canon

Canon XF300 Manuel utilisateur

Canon

Canon VIXIA HF M40 Manuel utilisateur

Canon

Canon XF205 Manuel utilisateur

Canon

Canon HV20 - VIXIA Camcorder - 1080i Manuel utilisateur

Canon

Canon DC100 - WL Remote Control Manuel utilisateur

Canon

Canon XL 1A Manuel utilisateur

Canon

Canon LEGRIA FS307 Manuel utilisateur

Canon

Canon AutoZoom Electronic 512XL Manuel utilisateur

Canon

Canon ES290 Manuel utilisateur

Canon

Canon XM1 Manuel utilisateur

Canon

Canon UC X 1 Hi Manuel utilisateur

Canon

Canon Vixia mini X Manuel utilisateur

Canon

Canon DIM-462 Manuel utilisateur

Manuels caméscope populaires d'autres marques

Toshiba

Toshiba CAMILEO Z100 Manuel utilisateur

Panasonic

Panasonic NV-VS40B Manuel utilisateur

Sony

Sony Handycam DCR-DVD7E Manuel utilisateur

Brinno

Brinno TimeLapse TLC200 Manuel utilisateur

JVC

JVC GR-SXM68AC Guide de démarrage rapide

Panasonic

Panasonic AG-HMC152EN Manuel utilisateur

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur

MYDLINK

MYDLINK DCS-6100LH Manuel utilisateur

Sony

Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur

SECURECOM

SECURECOM V-5014B Manuel utilisateur

Panasonic

Panasonic HDC-SD100 Manuel utilisateur

Sharper Image

Sharper Image U-VIDEO Manuel utilisateur

JVC

JVC AA-V15EG Manuel utilisateur

Sony

Sony Handycam DCR-VX2000 Manuel utilisateur

RCA

RCA CC616 Manuel utilisateur

Panasonic

Panasonic NVM40 Manuel utilisateur

ATIK Cameras

ATIK Cameras Horizon Manuel utilisateur

Sony

Sony Handycam HDR-CX580V Manuel utilisateur