Canon GL-2 Manuel utilisateur

Quick Start Guide

Canon GL2 Video Camera

Remove lens cap on front of camera

Attach battery pack to rear of camera by extending the viewfinder,

rotating it upwards, and sliding the pack into place

Insert miniDV tape by sliding the OPEN/EJECT button forward, placing tape

in compartment, pressing the PUSH mark until it clicks, and closing the cover

Initial Setup

To Begin Recording

Slide the POWER switch to CAMERAon the top left side of the camera

Slide the TAPE/CARD switch to TAPE near the grip on the right side

Turn the standby lever to STANDBY

Put the camera in EASY mode by sliding the program selector to the left.

This will allow you to point and shoot without making any manual adjustments.

For all other recording modes, slide the program selector to P.

Next, push in on the Select Dial and choose the mode you prefer.

AUTO - This is the same as Easy mode, except that you now have the

option of using any of the camcorder’s manual options.

MANUAL - This allows you to freely adjust any of the camera’s audio or

visual settings as you like.

For a more detailed description of all the camera’s possible settings,

please consult the full Instruction Manual.

Open the LCD screen by pressing the OPEN button and rotating it outward.

If you prefer, you can also use the camera’s Viewfinder instead.

Press the START/STOP button to begin recording. Press the START/STOP

button again to pause the recording. You can stop and restart as often as you like.

Canon GL2 Video Camera

Shotgun microphone

Additional Features

The shotgun mic will typically provide better sound quality for your

recording. To use it, slide the mic onto the accessory shoe and tighten

it with the shoe lock. Then select one of the following modes:

Shotgun: Best for recording clear sound from the front

Stereo 1: For recording sound from the front and surrounding area

Stereo 2: For recording surrounding sound in a wider area than Stereo 1

Zoom

To zoom in and out while recording, use the Wand Tcontrols.

T (telephoto) zooms in. W (wide-angle) zooms out.

Charging the battery

To charge the camera battery - place it in the power

adapter, connect the power cord to the adapter, and

plug it into an electrical outlet. When the power

light glows steadily, the pack is fully charged.

Running onAC power

To run the camera onAC power - 1) connect the power cord to the

adapter 2) plug the adapter into an outlet 3) connect the DC coupler

to the adapter and 4) attach the DC coupler to the camera

To playback your recording:

1. Slide the power switch to PLAY (VCR)

2. Load the casette tape

3. Open cover on top of the handle, and use the controls

To playback on a TV monitor:

Follow the 3 steps above, then connect the RCAcable to the A/V input

on the back of the camera, and the audio/video inputs on your TV.

If you encounter any problems, please give us a call at 1-877-633-8866 or

consult the full instruction manual included in this package.

Quick Start Guide

Canon GL2 Video Camera

Quick Start Guide

Canon GL2 Video Camera

Remove lens cap on front of camera

Attach battery pack to rear of camera by extending the viewfinder,

rotating it upwards, and sliding the pack into place

Insert miniDV tape by sliding the OPEN/EJECT button forward, placing tape

in compartment, pressing the PUSH mark until it clicks, and closing the cover

Initial Setup

To Begin Recording

Slide the POWER switch to CAMERAon the top left side of the camera

Slide the TAPE/CARD switch to TAPE near the grip on the right side

Turn the standby lever to STANDBY

Put the camera in EASY mode by sliding the program selector to the left.

This will allow you to point and shoot without making any manual adjustments.

For all other recording modes, slide the program selector to P.

Next, push in on the Select Dial and choose the mode you prefer.

AUTO - This is the same as Easy mode, except that you now have the

option of using any of the camcorder’s manual options.

MANUAL - This allows you to freely adjust any of the camera’s audio or

visual settings as you like.

For a more detailed description of all the camera’s possible settings,

please consult the full Instruction Manual.

Open the LCD screen by pressing the OPEN button and rotating it outward.

If you prefer, you can also use the camera’s Viewfinder instead.

Press the START/STOP button to begin recording. Press the START/STOP

button again to pause the recording. You can stop and restart as often as you like.

Canon GL2 Video Camera

Shotgun microphone

Additional Features

The shotgun mic will typically provide better sound quality for your

recording. To use it, slide the mic onto the accessory shoe and tighten

it with the shoe lock. Then select one of the following modes:

Shotgun: Best for recording clear sound from the front

Stereo 1: For recording sound from the front and surrounding area

Stereo 2: For recording surrounding sound in a wider area than Stereo 1

Zoom

To zoom in and out while recording, use the Wand Tcontrols.

T (telephoto) zooms in. W (wide-angle) zooms out.

Charging the battery

To charge the camera battery - place it in the power

adapter, connect the power cord to the adapter, and

plug it into an electrical outlet. When the power

light glows steadily, the pack is fully charged.

Running onAC power

To run the camera onAC power - 1) connect the power cord to the

adapter 2) plug the adapter into an outlet 3) connect the DC coupler

to the adapter and 4) attach the DC coupler to the camera

To playback your recording:

1. Slide the power switch to PLAY (VCR)

2. Load the casette tape

3. Open cover on top of the handle, and use the controls

To playback on a TV monitor:

Follow the 3 steps above, then connect the RCAcable to the A/V input

on the back of the camera, and the audio/video inputs on your TV.

If you encounter any problems, please give us a call at 1-877-633-8866 or

consult the full instruction manual included in this package.

Quick Start Guide

Canon GL2 Video Camera

Autres manuels pour GL-2

Table des matières

Autres manuels Canon caméscope

Canon

Canon DC100 - WL Remote Control Manuel utilisateur

Canon

Canon XL1SA Manuel utilisateur

Canon

Canon 2699B001 Manuel utilisateur

Canon

Canon VIXIA HF R10 Manuel utilisateur

Canon

Canon ZR500 Manuel utilisateur

Canon

Canon XA30 Manuel utilisateur

Canon

Canon XL 1 Manuel utilisateur

Canon

Canon ZR500 Manuel utilisateur

Canon

Canon XL 2 Manuel utilisateur

Canon

Canon PICTBRIDGE DC22 Manuel utilisateur

Canon

Canon VIXIA HF M301 Manuel utilisateur

Canon

Canon LEGRIA HF R46 Manuel utilisateur

Canon

Canon MV MVX2i Manuel utilisateur

Canon

Canon ZR70 MC A Manuel utilisateur

Canon

Canon UC 7500 Manuel utilisateur

Canon

Canon MVX25i Manuel utilisateur

Canon

Canon Vixia HG20 Manuel utilisateur

Canon

Canon Legria HFM31 Manuel utilisateur

Canon

Canon EOS C500 Manuel utilisateur

Canon

Canon G 45 Hi Manuel utilisateur

Canon

Canon E 500 Manuel utilisateur

Canon

Canon 2213C002 Manuel utilisateur

Canon

Canon optura300 Manuel utilisateur

Canon

Canon 2691B001 Manuel utilisateur

Manuels caméscope populaires d'autres marques

Toshiba

Toshiba CAMILEO Z100 Manuel utilisateur

Panasonic

Panasonic NV-VS40B Manuel utilisateur

Sony

Sony Handycam DCR-DVD7E Manuel utilisateur

Brinno

Brinno TimeLapse TLC200 Manuel utilisateur

JVC

JVC GR-SXM68AC Guide de démarrage rapide

Panasonic

Panasonic AG-HMC152EN Manuel utilisateur

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur

MYDLINK

MYDLINK DCS-6100LH Manuel utilisateur

Sony

Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur

SECURECOM

SECURECOM V-5014B Manuel utilisateur

Panasonic

Panasonic HDC-SD100 Manuel utilisateur

Sharper Image

Sharper Image U-VIDEO Manuel utilisateur

JVC

JVC AA-V15EG Manuel utilisateur

Sony

Sony Handycam DCR-VX2000 Manuel utilisateur

RCA

RCA CC616 Manuel utilisateur

Panasonic

Panasonic NVM40 Manuel utilisateur

ATIK Cameras

ATIK Cameras Horizon Manuel utilisateur

Sony

Sony Handycam HDR-CX580V Manuel utilisateur