Canon PIXMA MP500 Manuel utilisateur

Quick Start Guide

Table of Contents

Introduction 15

Document Handling 20

Paper Handling 21

Copying 27

Printing from a Memory Card 29

Printing Photographs Directly from a Compliant Device 34

Maintenance 35

QT7-0106-V02

Preparing the machine

Unpack the machine

Please confirm bundled items against the illustration printed on the lid of the packing box.

IMPORTANT

• Do not connect the USB cable until after the software is installed.

• A printer cable is not included. You must purchase a USB cable (less than 10 ft. / 3 m) to connect your

machine to a computer.

1Turn on the machine.

• The language setting is only available for some countries.

• If you have an undesired language selection, refer to the User’s Guide.

2Install the Print Head.

• If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves

to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center.

• There might be some transparent or light blue ink on the inside of the bag the print head comes in - this

has no effect on print quality. Be careful not to get ink on yourself when handling these items.

• Do not reattach the protective cap once you have removed it.

3Install the ink tanks.

• Ensure that all the ink tanks are installed in the order directed by the label. The machine cannot be used

unless all the ink tanks are installed.

• For safety reasons, store ink tanks out of the reach of small children.

• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.

• Be sure to remove the clear film from the ink tank in the exact order as shown in step 3.

• Do not reattach the protective cap once you have removed it.

• The Alarm Lamp still lights orange if an ink tank is not installed properly. Open the Scanning Unit

(Printer Cover) and make sure that all the ink tanks are installed in the correct order directed on the label.

4Align the Print Head from the Operation Panel.

Execute automatic Print Head alignment to keep high print quality.

• When executing automatic Print Head alignment, always load paper in the Auto Sheet Feeder. You can

load paper in both the Auto Sheet Feeder and Cassette when printing. For details, refer to the User's

Guide.

• If the automatic Print Head alignment screen is not displayed, see “Aligning the Print Head

Automatically” on page 38.

• When the Print Head position pattern is printed, Print Head alignment is complete.

Install the software

Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select

Custom Install in order to choose the options you would like to install.

IMPORTANT

• Temporarily close any open applications, including anti-virus software. Computer security programs

can be re-started after software installation.

Installing the Printer Driver - Windows

• If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this

version before installing the new version. For instructions on uninstallation, refer to the guides for that

version of MultiPASS Suite.

• You must log on as an administrator or have administrative privileges in order to install the software in

Windows XP or Windows 2000.

• Do not switch users during the installation process.

• If the following screen appears, the USB cable is connected.

Perform the following steps.

1. Press [ON/OFF] to turn off the machine.

2. Disconnect the USB cable.

3. Click [Cancel].

Installing the Printer Driver - Macintosh

• Do not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are not

supported.

• Enter the name and password for an Administrator Account if required.

Perform the following to make sure the driver has been installed correctly

1. Select [Applications] from the [Go] menu.

2. Double-click the [Utilities] folder, then the [Printer Setup Utility] ([Print Center] when using Mac OS

X v.10.2.x) icon.

If the printer is displayed in the [Printer List], the printer driver is installed.

If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select [USB]

from the pop-up menu. Select [MP500] from the [Product] list and click [Add].

When connecting from Mac OS X v.10.3.3 or earlier:

Restarting the computer while connected to the machine may cause the machine not to be detected. To

resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back

ON again.

Canon MP500 Quick Start Guide

Under the copyright laws, this manual may not be reproduced in any form, in whole or in

part, without the prior written consent of Canon Inc.

Disclaimer

Canon Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use

guide to your Canon MP500 Series. All statements, technical information and

recommendations in this manual and in any guides or related documents are believed

reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and

they are not intended to be, nor should they be understood to be, representation or

warranties concerning the products described.

Specifications are subject to change without notice.

As an ENERGY STAR partner, Canon Inc., has determined that

this product meets the ENERGY STAR guidelines for energy

efficiency.

All information regarding non-Canon products was compiled from publicly available

information. No representation is made regarding the accuracy thereof.

This machine supports Exif 2.2 (also called “Exif Print”).

Exif Print is a standard for enhancing the communication

between digital cameras and printers.

By connecting to an Exif Print-compliant digital camera, the

camera’s image data at the time of shooting is used and

optimized, yielding extremely high quality prints.

Model Name

K10264 (PIXMA MP500)

Trademarks

• “Windows” is a trademark of Microsoft Corporation, registered in the United States

and other countries.

• “Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S.

and other countries.

• “CompactFlash” is a trademark of SanDisk Corporation.

• “Microdrive” is a trademark of International Business Machines Corporation.

• “xD-Picture Card” is a trademark of Fuji Photo Film Co., Ltd.

• “SmartMedia” is a trademark of Toshiba Corporation.

• “MEMORY STICK”, “Memory Stick PRO”, “MEMORY STICK Duo” and “Memory

Stick Pro Duo” are trademarks of Sony Corporation.

• “SD card” and “miniSD Card” are trademarks of SD Association.

• “MultiMediaCard” is a trademark of Infineon Technologies AG.

• “IrDA Feature Trademark” is owned by the Infrared Data Association and used under

license therefrom.

• “Bluetooth” is a trademark of Bluetooth SIG, Inc.,U.S.A. and are licensed to Canon

Inc.

• All other product and brand names are trademarks of their respective owners.

• Specifications are subject to change without notice.

XHow to Use the Documentation Provided

Easy Setup Instructions (Printed documentation):

Be sure to read this sheet first.

This sheet includes instructions for setting up your machine and getting it ready for use.

On-screen Manuals

User’s Guide

Read this guide when starting to use the machine.

After following instructions in the Easy Setup Instructions, read this guide for instructions

on printing from your computer, direct photo printing from selected digital cameras,

copying, and scanning.

Refer to these guides as needed for full instructions on some of the more advanced

features.

Scan Guide

Refer to this guide for full instructions on scanning operation and settings.

Printer Driver Guide

Refer to this guide for full instructions on setting the printer driver.

Photo Application Guide

Refer to this guide for instructions on using various application software included on the

Setup CD-ROM.

XHow to Read the On-screen Manuals

The on-screen manuals are manuals to be viewed on your computer.

Read these manuals for detailed information on usage of the machine that is not

mentioned in this document, troubleshooting, or usage of the application softwares

supplied with the Setup CD-ROM, etc.

You can install the on-screen manuals using the Setup CD-ROM by either of the

following.

• Select “Easy Install” to install the on-screen manuals along with the MP driver and

application softwares.

• Select “On-screen Manual” from “Custom Install” to install the on-screen manuals.

If you have not installed or have deleted the on-screen manuals, use either method above

to install them.

For Windows:

• Browser: Windows HTML Help Viewer

• Note: Microsoft Internet Explorer 5.0 or later must be installed.

• The on-screen manual may not be displayed properly depending on your operating

system or Internet Explorer version. We recommend that you keep your system up to

date with Windows Update.

For Macintosh:

• Browser: Help Viewer

• Note: The on-screen manual may not be displayed properly depending on your

operating system. We recommend that you keep your system up to date.

XReading the Document

Symbols Used in This Guide

Buttons Used in This Guide

WARNING Indicates a warning concerning operations that may lead to death or

injury to persons if not performed correctly. In order to use the machine

safely, always pay attention to these warnings.

CAUTION Indicates a caution concerning operations that may lead to injury to

persons or damage to property if not performed correctly. In order to use

the machine safely, always pay attention to these cautions.

IMPORTANT Indicates operational warnings and restrictions. Be certain to read these

items to operate the machine correctly and to avoid damage to the

machine.

Indicates notes for operation or additional explanations. Reading these is

highly recommended.

1. (Operation branch-step) Used to explain each operation of a branch procedure.

[button name] Text enclosed in these brackets indicates a button on the Operation Panel of the

machine or an item on the computer to be manipulated.

Example: [Color]

<message> Text enclosed in these brackets indicates a message or selectable menu item

which appears on the LCD (Liquid Crystal Display).

Example: <PHOTO PAPER PRO>,<OFF>

Terms Used in This Guide

XSelecting the Language for the LCD

1Press [Menu].

2Use [W] or [X] to select <Maintenance/settings>, then press [OK].

3Use [W] or [X] to select <Device settings>, then press [OK].

4Use [S] or [T] to select <Language selection>, then press [OK].

5Use [S] or [T] to select the language, then press [OK].

machine General term used to represent MP500.

default A setting that remains in effect unless you change it.

documents The original sheets of paper, pages of a book, or photographs you copy, or scan

with the machine.

paper Paper on which you can print with the machine.

menu A list of settings from which you select an item to set up or change. A menu has

a title which appears on the LCD.

XSafety Precautions

Please read the safety warnings and cautions provided in this guide to ensure that you use

your machine safely. Do not attempt to use the machine in any way not described in this

guide. For detailed safety information, refer to the User’s Guide.

WARNING

You may cause an electric shock/fire or damage the machine if you ignore any of

these safety precautions.

zLocation

• Do not place the machine close to flammable solvents such as alcohol or thinners.

zPower supply

• Never attempt to plug or unplug the machine from the power supply when your hands

are wet.

• Always push the plug all the way into the power outlet.

• Never damage, modify, stretch or excessively bend or twist the power cord. Do not

place heavy objects on the power cord.

• Never plug the machine into a power socket that is shared with other equipment

(extension lead/cord, 2- or 3-way adapter, etc.).

• Never use the machine if the power cord is bundled or knotted.

• If you detect smoke, unusual smells or strange noises around the machine, immediately

unplug the machine at the power supply and contact your local authorized Canon dealer

or the Canon help line.

Using the machine in such conditions may result in fire or electrical shock.

• Periodically, unplug the machine and use a dry cloth to wipe off any dust or dirt

collected on the plug and the power outlet.

If the machine is placed at a location exposed to a lot of dust, smoke, or high humidity,

the dust collected on the plug absorbs moisture and may cause insulation failure and

fire.

Autres manuels pour PIXMA MP500

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon imageRUNNER ADVANCE C2230 Manuel utilisateur

Canon

Canon imageCLASS D660 Manuel utilisateur

Canon

Canon 4205B002 Manuel utilisateur

Canon

Canon imageCLASS MF4890dw Guide de sécurité

Canon

Canon imageRUNNER 2016 Series Manuel utilisateur

Canon

Canon PIXMA MX360 Series Manuel utilisateur

Canon

Canon imageRUNNER 5570 Manuel utilisateur

Canon

Canon PIXMA MP470 Manuel utilisateur

Canon

Canon PIXMA MP180 Manuel utilisateur

Canon

Canon MF724Cdw Manuel utilisateur

Canon

Canon PIXMA MX700 Series Manuel utilisateur

Canon

Canon iR2020 Series Manuel utilisateur

Canon

Canon 4788B018 Manuel utilisateur

Canon

Canon imageRUNNER 2270 Manuel utilisateur

Canon

Canon FY8-13HW-000 Manuel utilisateur

Canon

Canon IR5000 - iR B/W Laser Comment utiliser

Canon

Canon imageRUNNER 5070 Manuel utilisateur

Canon

Canon MultiPASS C5500 Manuel utilisateur

Canon

Canon FAX L290 Guide de sécurité

Canon

Canon PIXMA MP520 Manuel utilisateur

Canon

Canon PIXMA MP620 series Manuel utilisateur

Canon

Canon FAXPHONE L100 Manuel

Canon

Canon MultiPASS F20 Guide de sécurité

Canon

Canon IMAGERUNNER 1630 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur