Canon PIXMA MG5220 Series Manuel utilisateur

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MG5220

Mac OS

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MG5220

Mac OS

Preparing to Connect My Multifunction To My Network

Connecting Your MG5220 To Your Network

Installing The MG5220 Software

Preparing to Connect My Multifunction

To My Network

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

<< Previous Next >>

Preparing to Connect My Multifunction

To My Network

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of

the network device vary depending on your system environment. For

details, refer to your device's instruction manual or contact its manufacturer.

•In an office setup, consult your network administrator

•If you connect to a network that is not protected with security

measures, there is a risk of disclosing data such as your personal information

to a third party.

•If an error message appears or if you have trouble with the network

connection, refer to the printed manual: Network Setup Troubleshooting.

•Place the machine and computer on the same network segment.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.

Be sure to prepare an access point.

<< Previous Next >>

Connecting Your MG5220 To Your Network

Step 1

Use the ↑ or ↓ button (A) to display

Setup, then press the right FUNCTION

button (B).

Step 2

Use the ← or → button (C) to select

Wireless LAN setup, then press the

OK button.

<< Previous Next >>

Connecting Your MG5220 To Your Network

Step 3

Select Yes, then press the OK button.

Step 4

Select Easy setup, then press the OK

button.

When wireless connection is

enabled, the Wi-Fi lamp lights blue.

<< Previous Next >>

Connecting Your MG5220 To Your Network

Step 5

Select the access point name you

wrote down, then press the OK

button.

Step 6

Make sure that one of the below

screens is displayed, then press the

right FUNCTION button.

Note:

•Nearby access points may be detected.

•Access point names with 2-byte characters are not

displayed properly, however, they can be selected.

If neither is displayed, go to Step 9.

<< Previous Next >>

Connecting Your MG5220 To Your Network

Step 7

Enter the network key you wrote down on, then press the left FUNCTION button (E).

1. Press the center FUNCTION button

(F) to switch character entry

modes.

2. Enter upper and lower case letters

of the alphabet correctly.

<< Previous Next >>

Connecting Your MG5220 To Your Network

Step 7 (continued) Character Entry

This machine allows you to enter characters when an on-screen keyboard is displayed.

Follow the procedure below.

1. When the on-screen keyboard

shown above is

displayed, press the center

FUNCTION button (A) to

switch to a keyboard having

the characters you want to

use.

Four character sets are available: Upper-case alphabets, lower-case alphabets, numbers, and

symbols. Each time you press the center FUNCTION button, the on-screen keyboard is

switched among them.

<< Previous Next >>

Connecting Your MG5220 To Your Network

Step 7 (continued) Character Entry

2. Select a character on the on-

screen keyboard using the

↑↓←→ buttons (B) then

press the OK button to enter

it. Entered characters are

displayed on the upper

section (C) of the on-screen

keyboard.

3. Repeat (1) and (2) to enter

more characters.

4. After you enter all characters

you need, press the left

FUNCTION button (D).

•To insert a space, select Space on the on-screen keyboard and press the OK

button.

•To insert characters, select the section (C) of the screen using the ↑ or ↓

button, move the cursor to the character on the right of the target position

using the ← or → button, then enter characters.

•To delete a character, select the section (C) of the screen using the ↑ or ↓

button, move the cursor to the character on the right of the target position

using the ← or → button , then press the right FUNCTION button (E).

<< Previous Next >>

Autres manuels pour PIXMA MG5220 Series

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon imageCLASS D760 Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE C7065 Manuel utilisateur

Canon

Canon IMAGERUNNER 1630 Manuel utilisateur

Canon

Canon IMAGERUNNER 2020 Manuel utilisateur

Canon

Canon imageCLASS MF5770 Manuel utilisateur

Canon

Canon iP2600 - PIXMA Color Inkjet Printer Manuel utilisateur

Canon

Canon PIXMA MX922 Fiche d'information produit

Canon

Canon imagePRESS C800 Series Manuel utilisateur

Canon

Canon Color imageCLASS MF8580Cdw Manuel utilisateur

Canon

Canon LBP 3370 Manuel

Canon

Canon PIXMA MG5220 Series Manuel utilisateur

Canon

Canon MF7280 - ImageCLASS B/W Laser Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE DX 8995i Manuel utilisateur

Canon

Canon MB2000 series Guide de configuration

Canon

Canon ImageRunner iR8500 Series Manuel utilisateur

Canon

Canon IR5000 - iR B/W Laser Manuel utilisateur

Canon

Canon 5119B001AA Instructions de montage

Canon

Canon PIXMA MP170 Manuel utilisateur

Canon

Canon imageclass mf820cdn Manuel utilisateur

Canon

Canon PIXMA MX522 Manuel utilisateur

Canon

Canon Color imageRUNNER C1022 Manuel utilisateur

Canon

Canon Pixma MG2400 Series Guide de configuration

Canon

Canon imageCLASS LBP151dw Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE C255 Series Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur