Canoga Perkins 2345 Manuel utilisateur
EdgeAccess
Model 2345
T3 Fiber Optic Modem
User Manual
EdgeAccess Universal Chassis System
Model 2345 User Manual
CAUTION!
This product may contain a laser diode operating at a wavelength of 1300 nm - 1600 nm. Use of
optical instruments (e.g., collimating optics) with this product may increase eye hazard. Use of
controls or adjustments, or performing procedures other than those specified herein may result in
hazardous radiation exposure.
Under normal conditions, the radiation levels emitted by this product are under Class 1 limits in 21
CFR Chapter 1, Subchapter J.
ATTENCION!
Cet équipement peut avoir une diode laser émettant à des longueurs d'onde allant de 1300nm à
1600nm. L'utilisation d'instruments optiques (par exemple : un collimateur optique) avec cet
équipement peut s'avèrer dangereuse pour les yeux. Procéder à des contrôles, des ajustements ou toute
procédure autre que celles décrites ci-après peut provoquer une exposition dangereuse à des
radiations.
Sous des conditions normales, le niveau des radiations émises par cet équipement est en dessous des
limites prescrites dans CFR21, chapitre 1, sous chapitre J.
NOTICE!
This device contains static sensitive components. It should be handled only with proper ElectroStatic
Discharge (ESD) grounding procedures.
NOTE!
Cet équipement contient des composants sensibles aux décharges électro-statiques. Il doit absolument
être manipulé en respectant les règles de mise à la terre afin de prévenir de telles décharges.
EdgeAccess Universal Chassis System
Model 2345 User Manualii
NOTICE
Canoga Perkins has prepared this users manual for use by customers and Canoga Perkins personnel as
a guide for the proper installation, operation and/or maintenance of Canoga Perkins equipment. The
drawings, specifications and information contained in this document are the property of Canoga
Perkins and any unauthorized use or disclosure of such drawings, specifications and information is
prohibited.
Canoga Perkins reserves the right to change or update the contents of this manual and to change the
specifications of its products at any time without prior notification. Every effort has been made to
keep the information in this document current and accurate as of the date of publication or revision.
However, no guarantee is given or implied that the document is error free or that is accurate with
regard to any specification.
Canoga Perkins Corporation
20600 Prairie Street
Chatsworth, California 91311-6008
Business Phone: (818) 718-6300
(Monday - Friday 7 a.m. - 5 p.m. Pacific Time)
FAX: (818) 718-6312 (24 hrs.)
Web Site: www.canoga.com
Email: [email protected]
Copyright © 2000 - 2005 Canoga Perkins Corporation
All Rights Reserved
EdgeAccess®
Universal Chassis System
Model 2345
User Manual
Model Number 2345-UM
Product Number 6912470
Rev. K 09/2005
MM
EdgeAccess Universal Chassis System
Model 2345 User Manual iii
Table of Contents
Chapter 1 Overview ................................................................................................ 1-1
Chapter 2 Hardware Installation and Functions ................................................. 2-1
Setup and Installation ......................................................................................................................... 2-1
Power Up and Front Panel Functions ................................................................................................. 2-4
Alarms................................................................................................................................................. 2-5
Chapter 3 Software Management.......................................................................... 3-1
Setting Up for Network Management................................................................................................. 3-1
Set Up the Network Management Platform.................................................................................. 3-1
Set Up the PC for Terminal Operation ........................................................................................ 3-1
Management User Interface................................................................................................................ 3-2
General Screen Format................................................................................................................ 3-2
User Interface Organization ........................................................................................................ 3-3
Login and Main Menu.................................................................................................................. 3-4
Manage the 2345................................................................................................................................. 3-5
View the Hardware Setup............................................................................................................. 3-5
Set the Date and Time .................................................................................................................. 3-5
Set Up SNMP Access.................................................................................................................... 3-6
Manage Traps and Alarms........................................................................................................... 3-6
Set Up the Modem/SLIP/PPP Parameters ................................................................................... 3-8
Switch to PPP or SLIP Mode ....................................................................................................... 3-8
Set the VT100 Rate ....................................................................................................................... 3-9
Update Software........................................................................................................................... 3-9
Manage Security ............................................................................................................................... 3-10
Set Up Host Access..................................................................................................................... 3-11
Change Your Password.............................................................................................................. 3-11
Manage the Modem .......................................................................................................................... 3-11
Set Up Functions and Check Status ........................................................................................... 3-12
Set Up Redundancy .................................................................................................................... 3-12
Monitor Data Transmission .......................................................................................................3-13
Monitor Modem Performance.................................................................................................... 3-14
Chapter 4 Maintenance and Troubleshooting...................................................... 4-1
General Maintenance .......................................................................................................................... 4-1
Manage Cable Links .................................................................................................................... 4-1
Check Optical Power Levels ........................................................................................................ 4-1
Troubleshooting.................................................................................................................................. 4-2
Check a New Installation ............................................................................................................. 4-3
Set the Electrical Line Relay ........................................................................................................ 4-4
Run Loopback............................................................................................................................... 4-4
EdgeAccess Universal Chassis System
Model 2345 User Manuali
v
Chapter 5 Specifications..........................................................................................5-1
2345 Specifications .............................................................................................................................5-1
2345 Models........................................................................................................................................5-2
Appendix A Warranty............................................................................................A-1
Appendix B Acronyms and Abbreviations........................................................... B-1
Index..........................................................................................................................5-1
List of Figures
Figure 1. Rackmount 2345 .................................................................................................................1-2
Figure 2. Standalone 2345, Front and Rear Panels ............................................................................1-2
Figure 3. Jumper and Switch Locations .............................................................................................2-2
Figure 4. General Screen Format .......................................................................................................3-3
Figure 5. Normal Operation ...............................................................................................................4-5
Figure 6. Local Loopback ..................................................................................................................4-5
Figure 7. Local Bidirectional Loopback.............................................................................................4-5
Figure 8. Local Loopback at Both Ends.............................................................................................4-5
Figure 9. Remote Loopback ...............................................................................................................4-6
Figure 10. Remote Bidirectional Loopback .......................................................................................4-6
List of Tables
Table 1. Jumper Settings ....................................................................................................................2-1
Table 2. EIA-232 Pinout ....................................................................................................................2-3
Table 3. 2345 LED Functions ............................................................................................................2-4
Table 4. Main Menu Selections..........................................................................................................3-4
Table 5. Hardware Configuration Report...........................................................................................3-5
Table 6. SNMP Configuration Options..............................................................................................3-6
Table 7. Trap Configuration Options .................................................................................................3-7
Table 8. Alarm Configuration Options...............................................................................................3-7
EdgeAccess Universal Chassis System
Model 2345 User Manual 1-1
Chapter 1
Overview
The Model 2345 managed T3 fiber optic modem with Optical Line Interface Module (OLIM) extends
T3 (44.736 Mbps) signals between devices located up to 120 Km apart. The OLIM supports
multimode and single mode fiber. Use the modem to extend a PBX, router, video codec, DS3
multiplexer, or ATM switch.
The 2345 transports B3ZS or AMI coded data. The 2345 supports both framed and unframed modes.
Framed mode supports C-bit Parity or M-13 framing patterns, can correct polarity errors, and gathers
DS3 statistics. Unframed mode passes data with full transparency.
The 2345 can be used in a UCS 1000 or UCS 1001 chassis or directly as a standalone.
•The UCS 1000 Chassis can hold up to 15 model 2345 modems; you can manage each 2345 either
directly through the serial port or through the Domain Management Module (DMM) within the
domain.
Note: The Chassis Interconnect Module (CIM) must be present in the UCS 1000 chassis in order
for the DMM to recognize the 2345 modules.
•The UCS 1001 Chassis can hold up to two model 2345 modems; you can manage each 2345
directly through the serial port.
•The standalone 2345 provides one modem that you can manage directly through the serial port.
The 2345 is hot swappable; you can insert or remove it at any time without disrupting the data
transfer of other modules in the chassis.
The rackmount 2345 front panel, shown in Figure 1, includes:
•EIA-232, BNC, and optical connectors
•Reset switch
•LEDs for:
•System Status (STA)
•Configuration (CFG)
•Composite Loss of Signal (CLS)
•Test/Loopback (TST)
•Electrical Loss of Signal (LOS)
•Alarm/Unframed Data (AIS/UNFRMED)
The front and back panels on the standalone 2345, shown in Figure 2, include the same connectors,
switch, and LEDs, with these additional items:
•Alarm In and Out connectors
•Serial port
•MDM/TRM and Loopback switches
EdgeAccess Universal Chassis System
Model 2345 User Manual1-2
Figure 1. Rackmount 2345
Figure 2. Standalone 2345, Front and Rear Panels
EdgeAccess Universal Chassis System
Model 2345 User Manual 1-3
The 2345 supports both full modem redundancy, with two modems, and fiber redundancy, through
dual-path OLIMs. You can enable automatic or manual redundancy or disable the option.
Dual-path modules provide redundancy for the fiber link. The two transmit (Tx) outputs and two
receive (Rx) inputs are connected on different fiber. Both Tx output transmit the same data; one Rx is
active and the other is inactive. If data is lost on the active Rx, the module switches automatically to
the inactive Rx and you can troubleshoot while data transmission continues.
When the redundant mode is set to Auto and the link fails, the software logs an alarm and switches to
the secondary link. If the redundancy mode is set to Manual and the link fails, the software logs the
alarm, but does not switch to the secondary link.
For details on setting up the hardware for redundancy, see Chapter 2. For details on setting up the
software, see "Set Up Redundancy" on page 3-12.
EdgeAccess Universal Chassis System
Model 2345 User Manual1-4
Table des matières
Autres manuels Canoga Perkins Modem
Manuels Modem populaires d'autres marques
Davicom
Davicom DM562AP Manuel utilisateur
EpiValley
EpiValley TATA indicom SXC-1080 Manuel utilisateur
Zte
Zte WiMAX Manuel utilisateur
Intelimax
Intelimax MA-2060 Manuel utilisateur
SMC Networks
SMC Networks D3CM1604V Manuel d'utilisation et d'entretien
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur
US Robotics
US Robotics 3453C Manuel utilisateur
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur
Zte
Zte MF823 Manuel utilisateur
Four-Faith
Four-Faith F1403 Manuel utilisateur
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manuel utilisateur
Gemtek
Gemtek WiMAX WIXFBR-103 Manuel utilisateur