CAME LHS A/01 Manuel

LHS A/01 LHS V/01

LHS V/01 PLUS

INSTALLATION AND CONFIGURATION MANUAL

FA0 16 39 - E N

EN English

Page 2- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

GENERAL PRECAUTIONS

Read the instructions carefully before beginning the

installation and carry out the procedures as speciﬁed by the

manufacturer. • Installation, programming, commissioning

and maintenance must only be carried out by qualiﬁed,

expert technicians and in full compliance with the applicable

law. • Before carrying out any cleaning or maintenance,

disconnect the device from the power supply. • Wear anti-

static clothing and footwear if performing work on the circuit

board. • Only use this product for its intended purpose. Any

other use is hazardous. • Came S.p.A. is not liable for any

damage caused by improper, erroneous or unreasonable

use. • The product, in its original packaging supplied by

the manufacturer must only be transported in a closed

environment (railway carriage, containers, closed vehicles).

• If the product malfunctions, stop using it and contact an

authorised support centre.

If the production batch is not immediately

identiﬁable, please contact customer services.

The general conditions of sale are given in the

ocial CAME price lists.

Legislative References

This product complies with the applicable standards in force

at the time of manufacturing.

CAME S.p.A. declares that the product described in this

manual complies with Directive 2014/53/EU and the Radio

Equipment Regulations 2017.

The full EC declaration of conformity and UK Conformity

Assessed (UKCA) marking information can be found at www.

came.com.

98°

72°

1150

726

500

1550 ÷ 1650

Page 3- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

PRODUCT DATA AND INFORMATION

Description

LHS A/01 (840AA-0060)

Monolith intercom entry panel for X1 system expandable up to 4 calls.

LHS V/01 (840AA-0040)

Monolith video entry panel for X1 system expandable up to 4 calls.

LHS V/01 PLUS (840AA-0050)

Monolith video entry panel for X1 system expandable up to 4 calls, with Bluetooth and built-in RFID reader for access control.

Description of parts

1Video camera lens*

2Front cover

3Button

4Hole cover

5Microphone

6Front cover fastening screw

7Back

8Wiring hole

9Screws and expansion plugs

Optional accessories

10 Rain cover

11 Recessed-mount proﬁle and frame

12 Back box

13 Single button

14 Double button

* Video versions only (840AA-0050/840AA-0040)

Page 4- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

1Speaker volume control

2Microphone volume control

3Electric lock opening time control

4RESET button

5Call button P1

6Call button P3

7Warning LED Call in progress

8Warning LED Electric lock activation

9Warning LED Conversation in progress

10 Warning LED System busy

11 Terminal block

12 PROG button

13 PROG LED (yellow)

14 Call button P2

15 Call button P4

16 CAME KEY connector and rubber cap

RESET button

The [RESET] button allows you to restart the device.

Page 5- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

Size

135

243

97 23

205

170

Page 6- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

Technical data

MODELS LHS V/01 LHS V/01 PLUS LHS A/01

IP protection rating 54 54 54

IK protection rating 09 09 09

Operating temperature (°C) -25 ÷ +55 -25 ÷ +55 -25 ÷ +55

Storage temperature (°C) * -25 ÷ +70 -25 ÷ +70 -25 ÷ +70

Dimensions (mm) 97 x 205 x 23 97 x 205 x 23 97 x 205 x 23

Consumption (mA) 190 220 150

Consumption in stand-by mode (mA) 90 110 80

Power supply (V DC) 16-18 DC 16-18 DC 16-18 DC

Video standard PAL PAL -

Minimum lighting (LUX) 11-

Standard wireless - Bluetooth LE 5.0 -

Bluetooth radio frequency (MHz) - 2400 -

RFID frequency (kHz) - 125 -

Bluetooth transmission power (dBm) - -25 ÷ +3 -

Material colour Matt grey 9023 Matt grey 9023 Matt grey 9023

(*) Before installing the product, keep it at room temperature where it has previously been stored or transported at a very high or very

low temperature.

Page 7- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

INSTALLATION

Preliminary operations

Wall-mounted installation

Installation with rain cover (optional)

Page 8- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

Recess installation

Button assembly

Page 9- Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

Page 10 - Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

Function of terminals

①Local power supply input 16-18 V DC

②BUS output

③Max. 12V - 1A electric lock

④Earth

⑤Door release button (NO)

⑥Programmable I/O (Default NO port contact input)

⑦Max. auxiliary contact 1 A 30 V (Default AUX 2)