Bushnell 98-1214/05-08 Manuel utilisateur

Literature #: 98-1214/05-08

Distance to the FLaG every time!

Pantone Blackc

Pantone 356c

Pantone 360c

English. . . . . . . . . . . . . . . . 3

French. . . . . . . . . . . . . . . . 16

Spanish. . . . . . . . . . . . . . . 30

German. . . . . . . . . . . . . . . 44

Italian. . . . . . . . . . . . . . . . . 58

Portuguese. . . . . . . . . . . . . . 72

Pantone Blackc

Pantone 356c

Pantone 360c

CONGRATULATIONS on the purchase of a Bushnell Laser Rangeﬁnder. Your Bushnell®PinPro™is a

precision electronic measuring device designed to provide many years of enjoyment. This booklet will

help you achieve optimum performance by explaining its adjustments and features as well as how to care

for this precise laser rangeﬁnding instrument. To ensure optimal performance and longevity, please read

these instructions before using your PinPro.

INTRODUCTION

With its red dot sighting system, the PinPro allows you to quickly point and shoot your way to accuracy

on the golf course. Featuring a single hand pistol grip, simply lock onto a non-reﬂective target (such as

trees) within 450 yards or up to 330 yards to a reﬂective prism located on the top of the ﬂag. The Red

Dot Sighting system assures you’re on target and the digital external liquid crystal display clearly displays

your distance in yards or meters.

HOW IT WORKS

Your Bushnell PinPro was designed to provide fast and simple distance measurements to ﬂags and trees in

the golf course. Using Digital Technology the PinPro delivers accurate range performance to +/- one yard

under most circumstances and was designed to work with a specially designed reﬂective prism placed

on top of the ﬂagstick. The PinPro emits invisible, eye safe, infrared energy pulses. Sophisticated digital

technology instantaneously calculates distances by measuring the time it takes for each pulse to travel

from the rangeﬁnder to the target and back.

RANGING PERFORMANCE

The maximum range of the instrument depends on the reﬂectivity of the target. The maximum distance

for ﬂags with a reﬂective prism installed is 330 yards/301 meters while for non-reﬂective objects such

as trees is approximately 450 yards/411 meters. Note: You will get both longer and shorter maximum

distances depending on the reﬂective properties of the particular target and the environmental conditions

at the time the distance is being measured.

The color, surface ﬁnish, size and shape of the target all affect reﬂectivity and range. The brighter the

color, the longer the range. White is highly reﬂective, for example, and allows longer ranges than the

color black, which is the least reﬂective color. A shiny ﬁnish provides more range than a dull one. A small

target is more difﬁcult to range than a larger target. The angle to the target also has an effect. Shooting to

a target at a 90 degree angle (where the target surface is perpendicular to the ﬂight path of the emitted

energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In

addition, lighting conditions (e.g. the amount of sunlight) will affect the ranging capabilities of the unit.

The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Very sunny days will

decrease the unit’s maximum range.

enGLish

GETTING STARTED

INSERTING THE BATTERY

The battery door is located beneath the . To remove, slide the battery door downward towards the

carabineer. Next, pull the top portion of the battery door and remove it from the body. Insert one 9-volt

alkaline battery into the slot as indicated. Next, set the battery door bottom in place and slide upwards

until it closes.

USING THE CARABINEER CLIP

The handle of the PinPro was designed with an integrated carabineer clip easily allowing the golfer to

conveniently attach the PinPro to a golf bag when not in use. When it’s time to determine distance to the

next object on the course, simply detach the PinPro from the bag; hold at arm-length, and “point and

shoot” your way to lower scores.

OPERATIONAL SUMMARY

While holding the product in your hand at arm-length, turn the unit ON by quickly pressing and releasing

the trigger with your index ﬁnger. All liquid crystal segments and icons will initially be displayed. The

trigger is located underneath the objective lenses and when depressed again for ranging generates an

audio beep. Next, look through the red dot sighting system and locate the red dot. The object you intend

to acquire distance to can easily be targeted by placing the red dot upon the object.

The PinPro features two targeting modes, PinFire Mode and Non-PinFire Mode. When a target is acquired

in PinFire Mode the audio alarm sounds two beeps and distance is displayed on the external LCD.

When a target is acquired in Non-PinFire Mode the audio alarm sounds three beeps and the distance

is displayed on the external LCD. Once the unit is ON, PinFire Mode is initiated by a quick press and

release of the trigger. PinFire Mode should be used when the REFLECTIVE prism is attached to the top of

the ﬂag stick. While in this mode, the laser pulses will continue ﬁring for approximately 5 seconds and

then stop.

If the trigger is pressed and held the unit will go into Non-PinFire Mode and will hit most anything

without a reﬂective prism to 450 yards. This mode can be activated by pressing the trigger button after

2-3 seconds of PinFire mode. You may either hold the button from the initial press, or press and hold the

trigger anytime after the ~2-3 seconds of PinFire Mode (i.e. quick press-release, wait ~2-3s, press and

hold). Non-PinFire Mode is maintained as long as the trigger is pressed, a valid reading is obtained, or

the timeout expires.

Note:

– Once activated, the PinPro LCD will remain active and display the last distance measurement for

15 seconds. You can depress the trigger again at any time to distance to a new target. As with any

laser device, it is not recommended to directly view the emissions for long periods of time with

magniﬁed lenses.

– Make sure you aiming the PinPro to objects at least 7 yards away as this is the minimum distance it

is capable.

– PinFire Mode will provide distances much faster than Non-PinFire Mode as long as the intended target

contains a reﬂective prism.

FEATURES

Your PinPro’s LCD incorporates illuminated indicators and audio tones that advise you unit of measure,

when the laser is active, the battery charge is low, and when a target has been acquired. A summary of

these features is presented below:

ILLUMINATING INDICATORS

Low Battery – When the external liquid crystal display reads (i.e. low battery), the battery charge is

getting low and the 9-volt alkaline battery should be replaced.

Unit of Measure – The PinPro can be used to measure distances in yards or meters. The unit of measure

indicators are located towards the top portion of the LCD. To select between yards and meters, the unit

should be off. Then press and hold the trigger for approximately 5 seconds. During this time all liquid

crystal segments and icons will be displayed. The PinPro will beep twice and either the “Y” for Yards or

“M” for Meters will be displayed. As you continue to depress the trigger, the display will toggle back

and forth between Yards and Meters. Once the unit of measure desired is displayed, simply release the

trigger. The PinPro will return to the last unit of measure setting used each time the unit is turned on.

PinFire Mode – The PinPro is ready to ﬁre when the external display shows a solid “–”. A quick press

and release activates PinFire Mode and the PinPro will beep once. In this mode the display horizontally

scrolls line segments as follows:

Non-PinFire Mode – NON-PinFire Mode is indicated by a vertical scroll of all 3 ‘– – –’ segments in the

numeric display.

AUDIO TONES:

One Beep:

– Upon initial ﬁring indicates the laser is active and pulses are being emitted from the objective lens.

– The laser has ﬁnished ﬁring and distance was not acquired.

Two Beeps:

– Indicates a target has been acquired in PinFire Mode.

– Heard during unit of measure set-up

Three Beeps:

– Indicates a target is acquired in Non-PinFire mode.

YY Y

SPECIFICATIONS

Dimensions: 6.2 x 3.2 x 1.2 inches

Weight: 6.5 oz.

Accuracy: +/- 1 yard

Display: External Liquid Crystal Display

Power Source: 9 volt alkaline battery

Single Button Operation

Water Resistant

CLEANING

Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or ﬁngerprints,

clean with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing

may scratch the lens surface and eventually cause permanent damage. For a more thorough cleaning,

photographic lens tissue and photographic-type lens cleaning ﬂuid or isopropyl alcohol may be used.

Always apply the ﬂuid to the cleaning cloth - never directly on the lens.

Unit of Measure: Yards or Meters

7-yard minimum, 450 yards to trees and

330 yards to a reﬂective prism

Integrated Carabineer Clip

Red Dot Sighting System

Includes Case

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Bushnell Instrument de mesure

Bushnell

Bushnell 20-5103 Manuel utilisateur

Bushnell

Bushnell 202204 Manuel utilisateur

Bushnell

Bushnell 20-0001 Manuel utilisateur

Bushnell

Bushnell 20-0002 Manuel utilisateur

Bushnell

Bushnell 201932 Manuel utilisateur

Bushnell

Bushnell Pro 1600 Tournament Edition Manuel utilisateur

Bushnell

Bushnell Phantom Manuel utilisateur

Bushnell

Bushnell YARDAGE PRO LEGEND Manuel utilisateur

Bushnell

Bushnell GOLF Tour L7 201870A Manuel utilisateur

Bushnell

Bushnell 20-2018 Manuel utilisateur

Bushnell

Bushnell Cabela 20-3031 Manuel utilisateur

Bushnell

Bushnell Chuck Adams Rangefinder Manuel utilisateur

Bushnell

Bushnell Tour V2 Manuel utilisateur

Bushnell

Bushnell Sport 850 Manuel utilisateur

Bushnell

Bushnell 20-2020 Manuel utilisateur

Bushnell

Bushnell NEO GHOST Manuel utilisateur

Bushnell

Bushnell Yardage Pro 20-0500 Manuel utilisateur

Bushnell

Bushnell Scout1000 20-1931 Manuel utilisateur

Bushnell

Bushnell Edge Disc Golf Rangefinder Manuel utilisateur

Bushnell

Bushnell Tour Z6 Manuel utilisateur

Bushnell

Bushnell TOUR V4 SHIFT Manuel utilisateur

Bushnell

Bushnell Sport 202201 Manuel utilisateur

Bushnell

Bushnell Phantom Manuel utilisateur

Bushnell

Bushnell Tour V2 201930 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur