BURK Technology Arcturus Manuel utilisateur

Instruction

Manual

Arcturus firmware version 5.0.17.0

Manual Rev A

Arcturus

this manual is subject to

change without notice

Thank you for purchasing an Arcturus Antenna

Site Management System. You can expect state

of the art convenience and reliability that will

provide years of satisfaction.

USING THIS MANUAL

This manual is best viewed as a .pdf on a computer or tablet, as there are

many hypertext links to help you get to the section you need. Since most

of the initial setup requires AutoLoad Plus running on a PC, keeping a

copy of the manual in .pdf form on the same machine is recommended.

The .pdf file has bookmarks to help with navigation, so be sure you have a

current copy of Adobe Reader on your computer and have the Bookmarks

enabled. You can download the most recent version at:

http://get.adobe.com/reader/

To enable bookmarks, press and expand the desired section by

pressing . If necessary, right click on the document and select

‘Show Navigation Pane’.

You can also jump directly to a section from the TABLE OF

CONTENTS

Just click on the section or page number to go directly there.

Please take a few minutes to familiarize yourself with the

organization of this manual, as it will likely save time later when you

need to find a specific piece of information quickly. Throughout the

manual, you will find hypertext links that look like this: USING THIS

MANUAL Click on the link to go directly to the named section.

All manuals are available in

.pdf format at

www.burk.com

Here is a quick set of links to the major sections of the manual:

USING THIS MANUAL

This section

TABLE OF CONTENTS

Fully expanded table of contents useable in .pdf or

printed form

INTRODUCTION

Brief overview of the ARC Plus SL Version 5

OPERATION

Using the Web pages to operate the ARC Plus

INSTALLATION

Hardware installation

CONFIGURATION

AutoLoad Plus setup and required system settings

(See following sections for I/O configuration.)

METERS

AutoLoad configuration for analog meter inputs

STATUS

AutoLoad configuration for status inputs

COMMANDS

AutoLoad configuration for relay operation

VIRTUAL CHANNELS

Primer on using virtual channels with examples

MACROS

How to set up automatic functions with macros

including a primer with examples

APPENDIX A: SPECIFICATIONS

Arcturus specifications

NEW FEATURES AND FIRMWARE REVISIONS

For detailed information on new features and firmware revisions, refer to the Release Notes document for the

current version of Arcturus firmware. To obtain the Release Notes, visit www.burk.com/downloads, select the

support page for Arcturus, and download the current Arcturus firmware file. This compressed (zipped) folder

contains both the current Arcturus firmware and the Release Notes document.

 
5 
TABLE OF CONTENTS 
USING THIS MANUAL ............................................ 3 
NEW FEATURES AND FIRMWARE REVISIONS.....................4 
TABLE OF CONTENTS............................................. 5 
INTRODUCTION..................................................... 7 
ARCTURUS ................................................................7 
Front Panel.........................................................8 
Rear Panel .........................................................8 
INPUTS AND OUTPUTS .................................................9 
Plus-X Ethernet I/O ............................................9 
COMMUNICATIONS ...................................................10 
AutoLoad Plus Software ..................................10 
AutoPilot® Software ........................................10 
Web-based monitoring and control ................10 
SOFTWARE AND FIRMWARE UPDATES..........................11 
SYSTEM SECURITY.....................................................11 
OPERATION......................................................... 12 
WEB PAGE ..............................................................12 
Requirements...................................................12 
Security ............................................................13 
Logging In and Out ..........................................13 
Navigating the Web Page................................13 
Smartphone Web Page ....................................17 
INSTALLATION .................................................... 18 
NEEDED ITEMS.........................................................18 
RECOMMENDED SEQUENCE........................................18 
REAR PANEL CONNECTIONS ........................................19 
Connecting to the Ethernet ..........................19 
INITIAL SETTINGS ......................................................19 
Network settings..............................................19 
CONFIGURATION ................................................ 20 
USING AUTOLOAD PLUS SOFTWARE ............................20 
CONNECTING TO THE ARCTURUS...............................20 
SAVING AND ARCHIVING ARCTURUS CONFIGURATIONS ....21 
Saving Configuration Changes to the Arcturus 21 
Archiving Arcturus Settings to the PC ..............21 
UpLoading Archived Settings...........................21 
Uploading Firmware ........................................21 
CONNECTING PLUS-X I/O UNITS..................................22 
CHANGING THE SITE NAME.........................................22 
MANAGING USERS....................................................23 
TIME SETTINGS ........................................................25 
NETWORK SETTINGS..................................................26 
SNMP SETTINGS......................................................27 
Arcturus as an SNMP Manager........................27 
Arcturus as an SNMP Agent.............................34 
EMAIL AND DIAL-OUT NOTIFICATIONS ..........................39 
Configuring Email Alarm Notifications ............39 
Email Settings ..................................................40 
Email Lists ........................................................41 
Configuring Dial-out Alarm Notifications ........41 
Dial-out Lists ....................................................42 
SITE SETTINGS..........................................................42 
Startup Behavior..............................................43 
Timeout Settings..............................................43 
Front Panel Behavior .......................................44 
Alarms..............................................................45 
Events ..............................................................46 
Primary/Backup RSI Configuration ..................46 
Web Interface ..................................................47 
Modem Settings...............................................47 
Authorization Codes.........................................48 
Captures...........................................................48 
Hiding Unused Channels ..................................50 
CONFIGURING AN ARCTURUS NETWORK (MULTI-SITE 
INSTALLATIONS) .......................................................50 
Adding Sites to the Network ............................50 
Categorizing Sites ............................................51 
Setting the Network Password ........................51 
MACRO PRESETS ......................................................52 
SITE SPEECH LABEL ...................................................52 
METERS...............................................................53 
METER CHANNELS ....................................................53 
Channel and Units Labels.................................53 
Meter Type.......................................................53 
Voltage Range .................................................54 
Sample Type and Time.....................................54 
Decimal Places .................................................54 
Meter Channel Source......................................54 
METER GRAPH.........................................................56 
METER ALARMS .......................................................56 
Delayed Alarm Reporting.................................56 
Rearm Delay ....................................................56 
Enabling/Disabling Alarms ..............................56 

 
 6 
Setting Limits ...................................................56 
METER ACTIONS.......................................................57 
METER ALARM ACTIONS............................................57 
Alarm Conditions .............................................58 
METER NOTIFICATIONS..............................................59 
METER DISPLAY .......................................................60 
METER SPEECH LABELS ..............................................60 
CALIBRATING METER INPUTS ......................................61 
STATUS............................................................... 62 
STATUS CHANNELS....................................................62 
Inverting a Status Channel...............................62 
Sample Type and Sample Time ........................62 
Status Channel Source .....................................63 
STATUS ALARMS.......................................................64 
Enabling/Disabling Alarms ..............................64 
Delayed Alarm Reporting.................................64 
Off Time ...........................................................64 
Rearm Delay ....................................................65 
Alarm Severity..................................................65 
Alarm Priority...................................................65 
STATUS ACTIONS ......................................................65 
STATUS NOTIFICATIONS .............................................66 
STATUS DISPLAY.......................................................66 
STATUS SPEECH LABELS .............................................67 
COMMANDS ....................................................... 68 
Momentary or Latching Relays........................68 
Command Duration .........................................68 
Command Labels..............................................68 
Command Source.............................................69 
VIRTUAL CHANNELS ............................................ 72 
PRIMER ..................................................................72 
EXAMPLES...............................................................74 
Status Values in Meter Channels .....................74 
Min/Max/Average ...........................................74 
Transmitter Efficiency ......................................74 
Meter Validation..............................................75 
Status Based on Analog Limits.........................75 
Status for multiple events................................75 
Command Fault Checking ................................76 
VSWR Computation .........................................76 
MACROS............................................................. 77 
MACRO PRIMER.......................................................77 
Branching.........................................................77 
Actions .............................................................77 
IF statements ...................................................78 
Examples..........................................................79 
MACRO EXPRESSIONS................................................83 
General ............................................................83 
Arcturus ...........................................................83 
Date and Time..................................................83 
Memory ...........................................................84 
Macros.............................................................84 
Misc..................................................................84 
STARTING AND STOPPING MACROS ..............................85 
Autopilot ..........................................................85 
WEB Page ........................................................85 
Raise and Lower buttons..................................85 
Status Actions ..................................................86 
From a Macro ..................................................86 
Macro Schedule ...............................................86 
CONFIGURATION ......................................................88 
Calendar...........................................................88 
Email Templates ..............................................89 
CREATING MACROS ..................................................90 
Macro Editor....................................................90 
Saving Macros .................................................91 
APPENDIX A: SPECIFICATIONS..............................92 
 
 
 
 
 

INTRODUCTION

The Arcturus unit is an integral part of the Arcturus Antenna Site Management System, a complete, turnkey

solution for managing multiplexed TV and FM antenna sites. The system monitors key RF and environmental

parameters including forward power, VSWR, line pressure and temperature. Rapid activation of transmitter

interlocks in reaction to VSWR or reflected power faults removes RF energy from the combiner and antenna

system, minimizing the risk of loss or damage to combiners, transmission lines and antennas.

Arcturus hardware is based on ARC Plus technology proven in thousands of broadcast facilities. This high reliability

platform has been extended to provide the ultimate in fast, dependable fault detection. For stations using Burk

AutoPilot®, Arcturus data may be integrated with transmitter data and included in studio or NOC displays.

ARCTURUS

The core of the system is the Arcturus unit which provides onboard processing power and a built-in web server

for access via web browser (PC or mobile device). Connection to plant equipment is by means of one or more

Plus-X I/O units.

FRONT PANEL

ALARM LED

The Alarm LED indicates alarm activity. By default, the LED illuminates red when there is an

alarm at the

local site. It may instead be configured to illuminate when there is an alarm at any site in a connected ARC

Plus network (Click or turn to ALARMS for details). When no alarm is present, the LED is green, indicating

that power is on.

REMOTE LED

Indicates when link is lost or unit is in maintenance mode.

MAINTENANCE MODE PUSHBUTTON

Maintenance mode prohibits all commands. For safety, this can only be switched on or off locally.

REAR PANEL

MODEM/RS-232 (DB-9M)

Provides connection to an external dial-up modem or RS-232 link for optional AutoPilot monitoring and

control software.

SENSORS (RJ-25)

This jack is reserved for future one-wire sensors.

ETHERNET (RJ-45)

The Ethernet jack connects the Arcturus to the LAN/WAN for communications with the user as well as with

Plus-X I/O devices.

ALARM

The Form C alarm relay can be used to operate external equipment when an alarm condition

exists. The

relay may be configured to latch closed when there is an alarm at the local site or when there is an alarm

at any site in a connected ARC Plus network. A 3-pin connector block is included

with the Arcturus.

FAILSAFE

The Form C failsafe relay can be used to interrupt external equipment upon loss of communication with a

networked ARC Plus unit. The relay is latched closed when the network link is present.

POWER

Standard IEC power entry module. Connect to 100-240VAC, 47-63 Hz. Replace built-in fuse with same type

and value.

INPUTS AND OUTPUTS

There are no actual inputs or outputs on the Arcturus chassis. I/O is provided through a wide range of IP connected

Plus-X devices. In addition, virtual channels can be derived from a combination of existing channels, constants and

mathematical formulas. The SNMP Plus option enables direct control and monitoring of a wide variety of SNMP-

enabled devices. Up to 256 channels each of meters, statuses and command pairs can be configured on an

Arcturus.

PLUS-X ETHERNET I/O

The Plus-X line of Ethernet I/O devices offers a variety of channel configurations, making it possible to have a

combination of inputs and outputs that meets your needs without purchasing excess capacity. For a complete list

of Plus-X devices, visit: https://www.burk.com/products/Broadcast-1/Arcturus-99 .

Plus-X devices include:

➢Plus-X VSWR

➢Plus-X Integrated Input Unit

➢Plus-X Integrated Command Relay Unit

➢Plus-X 300

➢Plus-X 600

➢Plus-X EM Series Environmental Monitors

➢Plus-X AC-8

➢Plus-X IP-8 Adapter

➢Plus-X GSC Adapter

For specific information on installing and configuring your Plus-X accessories, refer to the manual for your product.

Manuals are available online at www.burk.com.

COMMUNICATIONS

AUTOLOAD PLUS SOFTWARE

AutoLoad Plus software provides PC-based configuration of the Arcturus system, including network settings, site

names, channel configuration, and network settings. With the exception of the initial IP address, all Arcturus setup

is accomplished via AutoLoad Plus, locally or remotely. (An IP connection is required.) Click or turn to USING

AUTOLOAD PLUS SOFTWARE.

AUTOPILOT® SOFTWARE

AutoPilot provides PC-based monitoring and control for the

Arcturus system. IP connectivity allows simultaneous

control of multiple sites, while optional dial-up modem

connectivity provides a means to access single sites from

outside the LAN. AutoPilot provides a customizable GUI,

logging and automatic report generation, network and

SNMP monitoring, and integration of remote security

cameras. AutoPilot instructions are covered in a separate

manual available at www.burk.com/downloads.

WEB-BASED MONITORING AND CONTROL

Arcturus includes a built-in web server for managing

remote sites via web browser. The web page is accessible

by entering the IP address or host name of the Arcturus in

your web

browser. For more on this feature, click or turn

to WEB PAGE.

The web server also provides connectivity to compatible

mobile devices such as smartphones and tablets. Click or

turn to SMARTPHONE WEB PAGE.

Table des matières

Autres manuels BURK Technology Unité de contrôle

BURK Technology

BURK Technology PlusConnect Nautel GV Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur