Buffalo TeraStation WSS 5000R2 Manuel utilisateur
TeraStation WSS 5000R2
User Manual
www.buffalotech.com
35020333-01
2014-01
2
Contents
Chapter 1 Installation ........................................................5
Diagrams ...............................................................................................5
Installation ............................................................................................7
Turning the TeraStation On and Off..................................................11
Installing Antivirus Software ............................................................11
Chapter 2 Remote Desktop .............................................12
Opening Windows Storage Server ....................................................12
Chapter 3 Windows Update ............................................13
Windows Update ................................................................................13
Chapter 4 Preinstalled Software ....................................14
RAID Builder .......................................................................................14
Buffalo Dashboard .............................................................................14
Email Notification ..............................................................................16
LCD Display Settings ..........................................................................16
Chapter 5 Managing Your Storage .................................18
Creating Volumes ...............................................................................18
Volume Types ................................................................................................18
Deleting Volumes ..........................................................................................19
3
Formatting Volumes .....................................................................................20
Creating a RAID 5 Volume ............................................................................20
Creating a Mirrored Volume (RAID 1) ..........................................................21
Creating a Striped Volume (RAID 0) ............................................................22
Creating a Spanned Volume .........................................................................23
Creating Simple Volumes (JBOD) .................................................................24
Hard Drive Replacement Procedure .................................................27
Hard Drive Replacement Examples .............................................................28
Chapter 6 Backup ............................................................39
Back Up in Windows Storage Server .................................................39
Preparing a Backup Destination ..................................................................39
Recovering Backup Data ..............................................................................43
Back Up with NovaBACKUP ...............................................................46
Installation ....................................................................................................46
Chapter 7 Settings ...........................................................48
Date and Time ...............................................................................................48
Server Name, Workgroups, and Domains ...................................................48
Changing the Password ................................................................................50
Adding a User ................................................................................................52
Adding a Group .............................................................................................53
Creating a Shared Folder ..............................................................................57
Email Notification .........................................................................................64
LCD Display Settings .....................................................................................65
Changing the IP Address ..............................................................................66
4
Chapter 8 NAS Navigator2 ..............................................67
Chapter 9 Appendix ........................................................70
LCD Display .........................................................................................70
Modes ............................................................................................................70
Errors and Status ...........................................................................................70
Default Settings .................................................................................71
Specifications .....................................................................................72
Data Backup ..................................................................................................73
Troubleshooting .................................................................................73
Windows Storage Server Recovery Procedure ................................74
Notes ...................................................................................................75
Compliance Information ....................................................................76
FCC Statement ...............................................................................................76
CE Mark Statement .......................................................................................76
Environmental Information .........................................................................76
KC ...................................................................................................................76
BSMI ...............................................................................................................77
CCC .................................................................................................................77
Models ...........................................................................................................77
5
Chapter 1 Installation
Diagrams
WS5600DR2
WS5400DR2
WS5200DR2
6
WS5400RR2
1 Power Button
To power on, connect the power cable and wait for 10 seconds, then press the power button. To power off, press
the power button.
2 Info LED
If there is a status message, the amber info LED will light up. Check the LCD panel to see the status message.
3 Error LED
If there is an error, the red error LED will light up. Check the LCD panel to see the error message.
4 LAN1 LED
When LAN port 1 is connected, this LED glows green. It blinks when the connection is active.
5 LAN2 LED
When LAN port 2 is connected, this LED glows green. It blinks when the connection is active.
6 LCD Panel
This display shows the status of many TeraStation settings. It also displays errors and messages when available.
7 Display Button
Switches between the different display modes. Also, if the TeraStation is beeping, press this button to stop it.
8 Factory Use Only
9 Drive Lock
Open the front panel with the key to replace hard drives or press the reset button.
10 Reset Button
To shut down and reboot the TeraStation, hold down the reset button.
11 Status LEDs
Normally, these LEDs blink green when hard drives are accessed. If a drive fails, its LED will turn red.
12 Factory Use Only
13 Boot Mode Switch
Leave the switch in the HDD position during normal operation. To recover settings, insert the recovery USB drive
7
into a USB 3.0 port, move the boot switch to the USB position, and press the power button.
14 UPS Port
Connect to a UPS.
15 USB 3.0 Port
Compatible Buffalo USB 3.0 hard drives, USB flash drives, digital cameras, and USB UPSs can be connected. USB
hubs are not supported.
16 USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPSs can be connected. USB hubs
are not supported.
17 LAN Port 1
Use an Ethernet cable to connect this port to your network.
18 LAN Port 2
This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation
directly to this port for backup.
19 Power Connector
Use the included power cable to connect to an UPS, surge protector, or outlet.
20 Fan
Do not block the fan.
21 Anti-Theft Security Slot
Use this slot to secure your TeraStation with a cable lock (not included).
22 UID Button
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
23 Serial Number
This sticker shows the TeraStation’s serial number.
24 Link LED
Glows orange when the unit is connected to a network.
25 Act LED
This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.
Installation
Note: If using OS X (10.4 or later), download and install “Remote Desktop Connection Client for Mac 2” from www.
microsoft.com.
1 Connect the TeraStation’s Ethernet and power cables and turn it on.
2 Connect the supplied USB device to your computer. Open the USB device and double-click TSNavi.exe in the
8
“TeraNavi” folder. TeraNavigator will launch.
Notes:
• If using Windows 2000 or 2000 Server, make sure that write-protection on the USB device is disabled before con-
necting it. To disable write-protection, slide the switch on the USB device toward the USB connector.
• If “Do you want to allow the following program to make changes to this computer ?” is displayed by Windows 8.1,
8 or Windows 7, click Yes. If “A program needs your permission to continue” is displayed by Windows Vista, click
Continue.
• With Mac OS, double-click the disk image “WS5000R2-XXX.dmg” (where “XXX” is the software version from the
USB device and double-click TeraNavigator.
• Disable your antivirus software firewall before continuing. You may not be able to install the software if antivi-
rus software or a software firewall are enabled. After you’ve finished setup, re-enable your firewall and antivirus
software.
3 Click Begin Installation. The wizard will guide you through installing NAS Navigator2.
4 Click Finish. NAS Navigator2 will open.
5 Right-click on your TeraStation’s icon, then select Properties. On a Mac, click the TeraStation’s icon while holding
down the control key, then select Configure.
9
6 Select the IP Address tab and check “Use DHCP” (or enter the IP address settings manually). Click OK.
If you are prompted to enter the administrator password for the TeraStation, it is “password” by default.
Note: If you change the IP address manually, change the DNS settings in Windows Storage Server also.
7 Right-click on your TeraStation’s icon and choose Open Remote Desktop. On a Mac, click the TeraStation’s icon while
holding down the control key, then select Open Remote Desktop.
10
Notes:
• If the message “The publisher of this remote connection cannot be identified. Do you want to connect anyway?”
is displayed, click Connect.
• If “The identity of the remote computer cannot be verified. Do you want to connect anyway?” is displayed, click
Yes or Continue.
8 Enter the username and password, then press the Enter key.
Note: The default username and password are “Administrator” and “password”.
9 Go to Server Manager and click Local Server to install the Windows Storage Server update program. Under
“PROPERTIES”, click the status shown next to “Windows Update”. Click Change settings, select “Install updates
automatically”, then click OK.
10 Go back to “Local Server” to set the date and time. Under “PROPERTIES”, click the item shown next to “Time zone”. In
the “Date and Time” tab, click Change date and time. Select the current date and time and click OK.
Note: In the “Internet Time” tab, click Change settings, and check “Synchronize with an Internet time server”. The date
and time will be updated automatically.
11 Create a shared folder. See the “Creating a Shared Folder” section in chapter 7 for more detail.
12 Change the TeraStation’s password. See the “Changing the Password” section in chapter 7 for more detail.
13 In NAS Navigator2, double-click your TeraStation’s icon. For Mac OS, the TeraStation is mounted as a drive icon on
the desktop, or it is displayed in the sidebar of the Finder.
Autres manuels pour TeraStation WSS 5000R2
1
Table des matières
Autres manuels Buffalo Stockage
Buffalo
Buffalo TS6400DN0802 Manuel utilisateur
Buffalo
Buffalo HD-PZU3 Manuel utilisateur
Buffalo
Buffalo MiniStation HD-PEU2 Manuel utilisateur
Buffalo
Buffalo HD-QS4.0TSU2/R5 Manuel utilisateur
Buffalo
Buffalo TeraStation HD-HTGL/R5 Manuel utilisateur
Buffalo
Buffalo HD-PHS series Manuel utilisateur
Buffalo
Buffalo LinkStation Pro Manuel utilisateur
Buffalo
Buffalo hd-patu3 Manuel utilisateur
Buffalo
Buffalo DriveStation HD-HS1.0TQ Manuel utilisateur
Buffalo
Buffalo LinkStation HD-H120LAN Manuel utilisateur
Buffalo
Buffalo HD-CELU2 DRIVESTATION Manuel utilisateur
Buffalo
Buffalo MiniStation DataVault HDS-PH160U2 Manuel utilisateur
Buffalo
Buffalo MicroStation SHD-PE Manuel utilisateur
Buffalo
Buffalo DriveStation Duo HD-WH4TU3R1 Manuel utilisateur
Buffalo
Buffalo LINKSTATION HD-HLAN Manuel utilisateur
Buffalo
Buffalo JustStore Portable HD-PVU2 Manuel utilisateur
Buffalo
Buffalo LS-QVL Manuel utilisateur
Buffalo
Buffalo HD-PZU3 Manuel utilisateur
Buffalo
Buffalo DriveStation Combo Manuel utilisateur
Buffalo
Buffalo HD-WLSU2R1 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur