Buderus Logano G215 US Manuel utilisateur

Please read these instructions carefully

6 720 804 877 – 2012/08 EN-US For the owner/operator

Users Manual

Oil and Gas Fired Boiler

Logano G215 US

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

Table of Content

1 Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 With respect to this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Application Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Guideline of Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Observe the following symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4.1 What to do when you smell smoke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4.2 Boiler placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.1 Turning on the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.2 Turning off the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.3 Emergency operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.4 Testing system pressure: adding make-up water and venting the system . . . . . . . . . . . . 7

3.4.1 When to test system pressure? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.4.2 Testing system pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.4.3 Adding Make-up Water and Venting of the system . . . . . . . . . . . . . . . . . . . . . . . 7

3.5 Why is regular maintenance important? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4 Trouble Shooting your Heating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

System pressure

Record fuel source:

__________________________________

Optimum operating pressure

(optimum valve): ______________ psi

Max system pressure:

(Standard = 30 psi) ______________ psi

Company/Date/Signature

Address of manufacturer:

Buderus Hydronic Systems, Inc.

50 Wentworth Avenue

Londonderry, New Hampshire 03053, USA

Telefon: (001) 603 552 1100

Fax: (001) 603 421 2719

Internet: www.buderus.net

Safety Considerations 1

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

1 Safety Considerations

1.1 With respect to this manual

This manual contains important information regarding

safe and efficient operation and maintenance of your

boiler.

The G215 boiler is designated as a heating appliance.

1.2 Application Purpose

The G215 boiler is used as a hot water heating boiler for

space heating purposes as well as DHW heating using

an indirect fired hot water tank in a closed loop heating

system for single and multi-family homes.

1.3 Guideline of Notice

Two levels of danger are identified by the following

warning labels:

ÎCross reference

A cross reference to another statement or another

manual is designated with an arrow Î.

1.4 Observe the following symbols

Learn proper operating procedures for your heating

system so that you:

–are carefully and completely instructed by your

installing contractor regarding proper operating

procedures.

–have carefully read the G215 Operating Manual.

Perform only those tasks on your heating system, as

they are described in this G215 Operating Manual.

1.4.1 What to do when you smell smoke

WARNING!

DANGER

Denotes a possibly severely dangerous

situation where, without proper caution,

bodily injury or loss of life may result.

CAUTION!

DANGER OF INJURY/SYSTEM

DAMAGE

Denotes a possibly dangerous situation

that can lead to mild or moderate bodily

injury or physical damage.

APPLICATION NOTICE

Application comment for optimum use of

equipment and adjustment as well as

useful information.

WARNING!

DANGER

due to unqualified personnel.

zPlease note that the installation, start-

up and maintenance can only be

performed by a qualified heating

contractor or service organization. Any

work on electrical and fuel carrying

components must be done by a

qualified service technician.

WARNING!

DANGER TO LIFE

Explosive danger due to flammable fumes!

zNo open fire! Do not smoke! Do not

use a lighter!

zAvoid generating sparks! Do not use a

electrical switch, or telephone,

electrical plug or bell!

zShut off main gas /oil supply!

zOpen windows and doors!

zNotify home owner, but do not use a

door bell or phone!

zLeave the building!

zNotify the gas utility or fuel oil service

company immediately from a remote

location.

zPossibly notify the police or fire

department.

zImmediately leave the building when

hearing or seeing discharging gases!

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

Safety Considerations1

1.4.2 Boiler placement

WARNING!

DANGER

Due to poisoning!

Insufficient combustion air for chimney

vent boilers with room air for combustion

can lead to dangerous conditions.

zMake sure that the combustion air

supply and discharge openings are not

reduced or closed off.

zKeep doors to the boiler room closed

and do not block lovers in boiler room

door.

zProtect the boiler room and avoid

rodents and birds from entering and

blocking the air openings.

zWhen the above issues have not been

resolved, the boiler can not be placed in

operation.

WARNING!

FIRE DANGER

due to flammable materials or liquids.

zMake sure that flammable or liquid

materials are not placed near the boiler.

Product Description 2

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

2 Product Description

The G215 boiler is a low temperature boiler for oil or gas

firing with a burner for both outdoor reset operation with

a suitable control or for cold start operation with a

Honeywell aquastat.

Your heating contractor or installer has equipped the

boiler with an approved burner.

The boiler consists of the following components:

–Logamatic control panel or Aquasmart control

–Boiler jacket

–Boiler block with insulation

–Customized burner

The control panel controls boiler temperature and

controls burner and pump operation.

The boiler can also be equipped with a Aquasmart

control for a more simple control of boiler operation.

The boiler jacket reduces energy loss and noice levels.

The boiler block transfers the heat produced by the

burning of the fuel to the boiler water. The insulation

reduces the standby loss.

Fig. 1 Boiler less burner

1Logamatic control panel

2Boiler jacket

3Boiler block with insulation

4Burner door front panel

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

System Operation3

3 System Operation

3.1 Turning on the system

Make sure prior to turning the system on:

–that the operating pressure is sufficient.

–that main fuel shut-off valve has been opened.

–that the main emergency switch is turned on.

When using a Buderus Logamatic control (Fig. 2)

zSet the adjustable aquastat dial on “AUT“ .

zSet the main switch to position "I". This turns on the

entire heating system.

When using a Aquasmart control (Fig. 3)

zTurn on the main system switch (Position "ON").

This activates the entire heating system.

3.2 Turning off the system

Buderus Logamatic Control (Fig. 2)

zTurn off main service switch (Position "0") at control.

This shuts off the boiler as well as all other system

components.

With Aquasmart control (Fig. 3)

zTurn off main service switch (Position "OFF") This

shuts off the entire system and all its components.

zShut off main fuel supply with main fuel valve.

Fig. 2 Turning on heating system (Logamatic 2000)

1Adjustable aquastat dial

2Main service switch

NOTICE

Information regarding the operation of the

Logamatic control, such as setting of

temperatures etc, can be found in the

Îdocumentation supplied with the

control.

Fig. 3 Heating system control with Aquasmart control (main

service switch)

CAREFUL!

SYSTEM DAMAGE

due to freezing conditions.

When the system is not in operation, the

potential for a freeze-up exists.

zKeep the system in operation as much

as possible.

zProtect the system against freeze-ups

by either filling the system with a 50%

glycol solution, or by draining both the

heating and DHW systems at their

lowest points.

System Operation 3

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

3.3 Emergency operation

Proceed in the following manner in an emergency

situation, such as a fire:

zShut off fuel supply at the main shut off valve.

zShut off the heating system by means of the main

service switch.

3.4 Testing system pressure: adding make-up water and venting the system

3.4.1 When to test system pressure?

Newly added make-up water tends to reduce its volume

within the first few days due to elimination of entrained

air. This may lead to air build-up and possible system

noise.

zCheck newly started systems daily for system

pressure and bleed radiators if necessary.

zCheck system pressure on a monthly basis and add

make-up water automatically and possibly bleed the

radiators.

3.4.2 Testing system pressure

The system operating pressure must be at least 12 to

15 psi (1 bar). The specific recommended

zThe specific recommended test pressure can be

found on Îpage 2. of this manual.

zRead off the pressure (psi) and temperature (°F) at

the P & T guage located at the supply side of the

boiler.

zWhen the system pressure drops below 12 to 15 psi,

add make-up water to the system.

3.4.3 Adding Make-up Water and Venting of the

system

Have your heating contractor or installer indicate to you

the location of the automatic feed valve and the

automatic air elimininator.

Fig. 4 Pressure/temperature gauge (located at the rear of

the boiler)

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

System Operation3

zConnect water hose to boiler drain and water supply.

zSlowly fill the boiler system. Observe water pressure

of the heating system.

zClose the water supply when reaching the desired

system pressure.

zBleed sir from the system at radiator air vents and

other locations.

zWhen the system pressure drops due to air venting,

add more water to the system.

zDisconnect water hose from boiler.

Please contact your heating contractor or service

company when you are changing your heating system to

another fuel, or when you are switching over to fuel with

different specifications.

CAREFUL!

SYTEM DAMAGE

due to thermal stresses.

When the boiler is hot and cold water is

being added, this may lead to thermal

stresses and shock the boiler. This may

lead to a cracked boiler.

zAdd only make-up water to the boiler

when the boiler temperature below 100

F. (Or when the cold feed is piped in on

the supply side of the boiler so that cold

make-up water is first sent into the

system).

WARNING!

SYSTEM DAMAGE

Due to frequent filling of system.

When you need to frequently add water to

the system, you can cause damage to the

system due to fresh water entry leading to

corrosion and internal lime build-up.

zCheck with your local service company

or contractor if you can use regular

untreated tap water, or if the fill water

must be treated.

zPlease inform your installing contractor

or service company, if frequent use of

make-up water is necessary.

CAUTION!

SYSTEM DAMAGE

due to incorrect fuel.

zUse only the designated fuel listed on

Îpage 2 of this manual.

System Operation 3

We reserve the right to make any changes due to technical modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

Boiler room

3.5 Why is regular maintenance important?

Heating systems require regular maintenance for the

following reasons:

–To maintain high efficiency operation and minimal

use of fuel.

–To maintain a high level of system reliability.

–To keep environmental emissions at a minimum.

zWe recommend that you sign a yearly maintenance

agreement with your fuel oil company or service

company.

CAUTION!

BOILER DAMAGE

due to contaminated combustion air.

zNever use or store chlorine containing

cleaning agents or hydro-carbon-

halogen type compounds (such as

sprays, cleaning and dissolving agents,

paints, glues and alike) in the boiler

room or near the combustion air

passages.

zAvoid excessive dust generation.

CAREFUL!

SYSTEM DAMAGE

due to water.

zIn case of flooding conditions, shut of

the fuel supply and electrically

disconnect the heating system

(ÎChapter 3.2, page 6).

zHave your system fully checked by a

qualified heating contractor or service

company prior to putting it back in

operation.

zHave all components, that have been in

contact with water, replaced by your

contractor or service company.

CAREFUL!

SYSTEM DAMAGE

due to missing or poorly performed boiler

cleaning and maintenance.

zHave your heating system once

annually checked, cleaned and

serviced by a qualified service

company or contractor.

We reserve the right to make any changes due to techincal modifications!

Users Manual Logano G215 US • Issue 08/2004

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

Trouble Shooting your Heating System4

4 Trouble Shooting your Heating System

Two different type of problems can be identified:

–burner related problems, or

–problems related with the control system and heating

system.

An alarm light on the burner will typically light up during

a burner lock-out condition (ÎSee burner manual).

Typically this problem is resolved by pressing the burner

reset button. Press the burner reset button once. If the

burner does NOT fire, contact your local service

company for assistance.

Problems related to the control panel and/or heating

system itself, are typically shown on the display of the

control panel, if the boiler is so equipped. Further

information can be found in the Îmanuals supplied

with the control panel.

Burner lock-out condition

zPress the burner reset button once. If the burner

does NOT fire, contact your local service company

for assistance.

Fig. 5 Burner lock-out condition

1Burner

CAUTION!

SYSTEM DAMAGE

due to freezing conditions.

When the heating system is not in

operation due to a problem condition, the

possibility of a freeze-up may exist.

zTry to locate and resolve the problem.

zIf not possible, contact your local con-

tractor or service company.

Autres manuels pour Logano G215 US

Table des matières

Autres manuels Buderus Chaudière

Buderus

Buderus Logano GE615 Manuel utilisateur

Buderus

Buderus Logamax plus Manuel utilisateur

Buderus

Buderus Logano GC 124 II Manuel utilisateur

Buderus

Buderus SU400.5 Manuel

Buderus

Buderus Logano GC 124 II Guide rapide

Buderus

Buderus Logalux PL750 Caractéristiques techniques

Buderus

Buderus GB142 Manuel de référence

Buderus

Buderus Logamax plus GB162-80 kW Mode d'emploi

Buderus

Buderus GB162-65 Manuel utilisateur

Buderus

Buderus SB735 Series Manuel

Buderus

Buderus Logano plus GB102S Manuel utilisateur

Buderus

Buderus Logano GE315 Guide de démarrage rapide

Buderus

Buderus Logano G115 WS US/CA Manuel utilisateur

Buderus

Buderus 500-24C Manuel utilisateur

Buderus

Buderus G201 Manuel utilisateur

Buderus

Buderus Logano G234X Manuel utilisateur

Buderus

Buderus Logano GA244-37 Manuel

Buderus

Buderus Logano G124X II/SP Manuel utilisateur

Buderus

Buderus Logano G215 US Manuel utilisateur

Buderus

Buderus SU120/5 Manuel utilisateur

Buderus

Buderus Condensing gas boiler Manuel utilisateur

Buderus

Buderus GB142 Manuel utilisateur

Buderus

Buderus Logamax plus GB162-100 kW Manuel utilisateur

Buderus

Buderus Logano plus GB312 Manuel utilisateur

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Viessmann

Viessmann VITODENS 200 Mode d’emploi

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur

Radiant

Radiant R2K 55 Manuel