BT CONVERSE 2100 Manuel utilisateur

User Guide

BT CONVERSE 2100

• Three one-touch buttons for easy dialling of your most important numbers.

• Headset facility lets you make and receive calls privately while keeping

your hands free.

• Secrecy feature lets you talk to someone else close by without your

caller hearing.

• Last number redial.

• Providing you are connected to a compatible switchboard, the message

waiting indicator will ash when you receive new messages.*

• Amplier lets you switch the earpiece volume between Normal and High.

• Adjustable ringer volume.

Welcome

to your BT Converse 2100

Corded Telephone

* BT 1571 or similar network voicemail users can also use this feature, however the indicator light will not ash.

New voicemail messages will be indicated by a stuttered dial tone when you pick up the handset.

If you experience any problems, please visit www.bt.com/producthelp

Got everything?

• BT Converse 1200 telephone

• Handset and cord

(already tted to base)

• Telephone line cord

(already tted to base)

• Desk mounting plinth

• Wall mounting plugs and screws

This User Guide provides you with all the

information you need to get the most from

your BT Converse 2100.

You must rst set up your BT Converse 2100

before you can use it. This doesn’t take long as

it is easy to do.

Just follow the simple instructions on the next

few pages.

Hearing aid friendly

The BT Converse 2100 is tted with an inductive coupler so it is compatible

with hearing aids.

If you experience any problems, please visit www.bt.com/producthelp

Getting started

Location ..........................................................................5

Setting up .......................................................................5

Getting to know your phone

Buttons and features ........................................................6

Using your phone

Making and ending calls ...................................................7

Make a call using a headset ..............................................7

Receive a call using a headset ...........................................7

Redialling the last number ................................................7

Secrecy ...........................................................................8

Message waiting ..............................................................8

Adjusting the ringer volume .............................................9

Adjusting the ringer tone .................................................9

R/Recall button ...............................................................9

Amplify ...........................................................................9

M1-M3 memory buttons

Store/replace a one touch number ..................................10

Dial a one-touch memory number ..................................10

Storing a pause in a number ...........................................10

Delete a stored number ..................................................10

Help .......................................................................... 11

General information

Safety information .........................................................12

Guarantee .....................................................................12

Returning your phone ....................................................12

Technical information .....................................................13

How many telephones can you have? ..............................13

Switchboard compatibility ..............................................13

R&TTE Directive .............................................................13

Product disposal instructions ..........................................13

Wall mounting your phone .............................................14

In this guide

If you experience any problems, please visit www.bt.com/producthelp

WARNING

Do not place your BT Converse 2100 in the

bathroom or other humid areas.

Other electrical equipment close to your

Converse could have an adverse effect on call

quality. If you experience buzzing during a call

try moving the Converse away from any electrical

equipment that may be nearby.

Location

You need to place your BT Converse 2100 within 3 metres of a telephone socket

so that the cable will reach. Your BT Converse 2100 can be wall mounted,

see ‘Wall mounting your phone’ on page 14.

Setting up

1. Plug the end of the telephone line cord into the telephone wall socket.

2. Check that the dialling Mode switch on the underside of the base is set to

TB for tone dialling with timed break recall.

3. Fit the desk mounting plinth if required by positioning the plinth over the lugs

and pushing it down into place, as shown by the blue arrows.

Your BT Converse 2100 is now ready for use.

Getting started

Dialling mode

If connecting to a switchboard you may need to

adjust the dialling mode setting to P or T using

the Mode switch on the underside of the base.

If in doubt, please consult your service provider.

IMPORTANT

Only use the handset and line cord supplied or

this product may not work.

If you experience any problems, please visit www.bt.com/producthelp

Handset park

If the phone is wall-mounted,

you can hang the handset

here if you need to leave the

phone during a call.

M1–M3 one-touch

memory buttons

Press a one-touch button

to dial the stored number,

page 10.

One touch memory label

Keep a note of your numbers.

Instructions on how to store a

one-touch number are printed

on the reverse of this label.

Headset socket

(underneath the phone)

Lets you connect a Headset

(not supplied), page 7.

Redial

Redials the last number

called, page 7.

Also used to enter a pause in a

stored number, page 10.

R (Recall)

For use with a switchboard

and some BT Calling Features,

page 9.

Getting to know your phone

Message waiting indicator

Flashes if you have

Voicemail, page 8.*

Call indicator

Flashes when you have an

incoming call.

Dialling mode switch

(underneath the phone)

Lets you set the dialling

mode, pages 5 and 13.

Message waiting switch

(underneath the phone)

See page 8 for details if

you are connected to a

switchboard.

Ringer switch

(underneath the phone)

Lets you adjust the ringer

tone, page 9.

Ringer volume switch

(underneath the phone)

Lets you adjust the ringer

volume, page 9.

Secrecy button & indicator

During a call, press to stop

your caller hearing you

so you can talk privately

to someone else close by,

page 8.

Amplify

Press to switch the earpiece/

headset volume between

Normal and High, page 9.

Headset button & indicator

Lets you make and receive

calls with a headset, page 7.

Buttons and features

* The light will only ash if your BT Converse is connected to a PBX switch or similar.

The light will not ash when used with network services such as BT 1571.

If you experience any problems, please visit www.bt.com/producthelp

Making and ending calls

1. Lift the handset and dial the number you want.

2. Replace the handset to end the call.

Make a call using a headset

Headsets are not supplied with your BT Converse 2100. However, you can

purchase headsets (with RJ11 jack) by visiting www.shop.bt.com

1. Plug the headset (not supplied) into the socket marked on the underside

of the base.

2. Press and dial the number. When the headset is in use the headset

indicator (on the button) will be lit.

Press to end the call.

Receive a call using a headset

1. When the phone rings and the headset is plugged in, press to answer.

Redialling the last number

The redial number can up to 32 digits long. If the last number dialled was longer

than 32 digits, only the rst 32 digits will be dialled.

1. Lift the handset, or press , then press .

Using the phone

If you experience any problems, please visit www.bt.com/producthelp

8Using the phone

Secrecy

During a call, you can talk to someone nearby without your caller hearing you.

1. Press . The red secrecy light (on the button) comes on and your

caller cannot hear you.

2. Press again to return to your caller.

Message waiting

If your BT Converse phone is connected to a switchboard, the message waiting

indicator will ash when you receive new voicemail messages.

BT 1571 or similar network voicemail users can also use this feature, however

the indicator light will not ash. New voicemail messages will be indicated by a

stuttered dial tone when you pick up the handset.

Message waiting switch

If your telephone is connected to a switchboard you may need to change the

message waiting switch setting on the base of the phone. It is pre-set to MW3

which is for an SX2000 switch. MW1 and MW2 positions are for when the

telephone is connected to an ISDX switch. If the switch is moved to MW2 and the

message waiting indicator stays on permanently, use MW1.

1. Lift the handset, or press and dial to connect to

your answering service.

If in doubt, please refer to your PBX instructions/manager for the correct

procedure to access this service.

If you experience any problems, please visit www.bt.com/producthelp

Using the phone

After you hang up, the volume will automatically

return to Normal volume.

Adjusting the ringer volume

1. Set the Ringer Volume switch on the underside of the phone to 0 (Off), 1 or 2.

Adjusting the ringer tone

1. Set the Ringer switch on the underside of the phone to 1 (Low), 2 (Medium)

or 3 (High).

R (Recall)

The button is used to access a range of switchboard services, for example,

to transfer calls and with some BT Calling Features.

Amplify

1. Press to switch the earpiece/headset volume between

Normal and High.

If you experience any problems, please visit www.bt.com/producthelp

Each number can be up to 32 digits long and can

include a pause or #.

If you enter more than 32 digits you will hear an

error beep.

You can store your 3 most frequently used phone numbers on the one-touch memory

buttons ( , and ) and dial them by pressing a single button.

Store/replace a one touch number

1. Lift the handset, or press , to get a line.

2. Press and hold the , or button you want until you hear a

beep and the Secrecy light ashes.

3. Enter the number you want to store.

4. Press the same , or button to conrm. The number is

stored. You hear a conrmation beep.

Dial a one-touch memory number

1. Lift the handset, or press , then press the one-touch button you want.

The stored number is dialled.

Storing a pause in a number

A pause is normally inserted in a stored telephone number after a switchboard

access code (e.g. 9) to allow the switchboard time to get an outside line before

the number is dialled. For example, 9 – Pause – 08702405522.

1. To enter a pause, press in the appropriate place when storing the number.

Delete a stored number

1. Lift the handset, or press , to get a line.

2. Press and hold the , or button you want until you hear a

conrmation beep and the Secrecy light ashes.

3. Press to delete the stored number. You hear a conrmation beep.

4. Replace the handset or press .

M1 – M3 memory buttons

To enter a pause when storing a number

press .

To cancel while storing, hang up the handset

or press . Any number already stored

will be kept.

Table des matières

Autres manuels BT Téléphone

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur

Ericsson

Ericsson Dialog 3213 Manuel utilisateur