BT DECTfax Manuel utilisateur
DEC Tfax
Additional Handset
User guide
Please open this page for an ‘At a glance’ guide
to your DECTfax Additional Handset
This equipment is not designed for
making telephone calls when the
power fails.
Alternative arrangements should be
made for access to emergency services.
3
Hints and tips boxes
In this user guide, we’ve included helpful
tips and useful notes. They are shown in
a grey box.
At a glance 1
Introduction 4
Setting up 6
Using your handset 10
Additional functions 22
Help 28
Index 30
In this guide
4
Introduction
Thank you for choosing a BT product. We
expect that you will have many years of
excellent service from it.
Your BT DECTfax Additional Handset is
designed for ease of use and built to the high
standards demanded by BT. It is designed to be
used with the DECTfax and DECTfax Plus
base stations. It may also be registered with
other GAP compatible DECT base stations,
however, this may result in the loss of certain
functions specific to the DECTfax range.
Please read these instructions carefully
before use and retain this user guide for
future reference.
For your records
Date of purchase
Place of purchase
Serial number
(on the side of the gift box)
Purchase price
For warranty purposes, proof of purchase is
required, so please keep your receipt.
5
Introduction
Equipment
Check your BT DECTfax Additional handset is
complete when you unpack it. You should have:
• DECTfax Additional Handset
• Handset charger
Customer Helpline
If you have any problems with your DECTfax, call
the BT Helpline on 0845 603 1066.
1 Charging the handset
The handset is powered by a rechargeable
NiCad battery. The charger uses a fast charge
system. For example, 10 minutes of charging
will give about 10 minutes of talk time. When
fully charged the battery should give up to 5
hours talk time and up to 50 hours standby.
When the handset is not in the charger, the
charging icon indicates the current level of
charge in the battery - 4 dots means the
handset is fully charged and 1 dot means the
charge is low.
1Plug the charger into the mains.
2Place the handset into the charger. The
handset display shows the moving charging
icon.
6
Setting up Follow these steps
to get your DECTfax Additional Handset
ready to use
IMPORTANT
The new handset may not be charged. It takes up to
12 hours to charge completely.
eg 50% charge
3When the battery is fully charged the
charging icons stop moving and begin to
flash.
2 Registering the handset
For the handset to interact with the base
station it must be registered with it.
To register a handset
A handset can be registered to the base station
only if the handset security code on the
handset matches the code on the base station.
The base station code is preset to 0000. If this
has not been changed, you can register the
handset using the ‘simple method’. If it has
been changed you will need to use the
‘customised method’. You will also need to use
the ‘customised method’ if you wish to register
the handset with more than one base station.
7
Setting up
Battery low warning
If, during a call, the battery charge is running low,
the handset beeps every 4 seconds.
Note
You can also register your handset with other makes
of DECT base stations, provided they are GAP
compatible. You will need to use the ‘customised
method’ of registration in conjunction with the
instructions for the particular base station.
The simple method
Use this method if you have only one base
station and the handset security code is 0000.
1At the handset press OK then 6. The
connection icon will flash.
2At the base station press Function then 8
then 8. The display shows 88 HANDSET--
REGI.
3Press Function.
The base unit searches for handset to be
registered. Once found, the handset is
assigned the next available handset number.
The handset display now shows the handset
number it has been assigned and the
connection icon will go out.
The customised method
Use this method if you:
Have set the base station handset security
code to a number other than 0000.
8
Setting up
M
N
O
6
T
U
V
8
T
U
V
8
IMPORTANT
The following instructions refer to the Function
button on the DEC Tfax base station. If you are
using a DECTfax Plus base station you should use
the Ok/Menu button.
Want to register a handset to more than one
base station.
Want to allocate a handset with a handset
number other than the next sequential one.
1At the base station press Function, then 8,
then 8, then Function again.
2At the handset press OK then 9, then use the
▲and ▼buttons to scroll to the first empty
location, indicated by a line of dashes in the
display.
3Press OK. The telephone icon flashes in the
display.
4After a few seconds the display shows four
dashes (- - - - ) to prompt you to enter the
handset security code
5Enter the code that is on the base station,
either 0000 or whatever you have changed
it to.
6Press OK and the display will show the
available handset numbers (1-4).
7Press the number you want on the keypad -
the display will show this number to indicate
that the handset is registered.
9
Setting up
T
U
V
8
T
U
V
8
W
X
Y
Z
9
Switching the handset on and off
Your handset must be switched on before you
can use it to make or receive calls.
To switch the handset on
1Open the cover by pressing the catch on the
left-hand side of the handset.
2Press and release the On/Off button.
The display shows the handset number. You
can now make and receive calls.
10
Using your handset
Note
The new handset may not be charged. It takes up to
12 hours to charge completely.
Note
If your handset is registered with another make of
base station you will be abe to make and receive
external calls but not all the features explained in
this guide will be available.
Table des matières
Autres manuels BT Combiné
BT
BT BT DIVERSE 5100 Manuel utilisateur
BT
BT SYNERGY 3000 Manuel utilisateur
BT
BT DIVERSE 2000 EXECUTIVE Manuel utilisateur
BT
BT Diverse 5200 Manuel utilisateur
BT
BT DIVERSE 5300 Manuel utilisateur
BT
BT Diverse 2000 Manuel utilisateur
BT
BT QUARTET 3000 Manuel utilisateur
BT
BT CALLER DISPLAY 1000 Manuel utilisateur
BT
BT CALLER DISPLAY 1000 Manuel utilisateur
BT
BT FREESTYLE 4500 Manuel utilisateur
BT
BT DIVERSE 5100 ADDITIONAL Manuel utilisateur
BT
BT QUARTET 2000 Manuel utilisateur
BT
BT agile Manuel utilisateur
BT
BT Freestyle 6 Manuel utilisateur
BT
BT DIVERSE 5200 ADDITIONAL Manuel utilisateur
BT
BT DIVERSE 5400 ADDITIONAL Manuel utilisateur
BT
BT 2000 Executive Manuel utilisateur
BT
BT Diverse 7460 Manuel utilisateur
BT
BT DIVERSE 6100 Manuel utilisateur
BT
BT FREESTYLE 2000 Manuel utilisateur
