Brother GT-541 Feuille d'instructions

GT541 INSTALL PROCEDURES

Machine Weight 220 lbs.

 Crate is shrunk wrapped and strapped

1. Remove wrap and straps

2. Remove Top - first remove clips that holds top in place.

3. Remove card board internal sidings

• Remove thin cardboard top

• Remove accessory box

• Thin boards go on left and right sides of machine

• Thick boards go on Front and Back side of machine

• Remove box sides – surrounding of crate – first remove clips that hold

bottom in place.

• Remove plastic wrap from machine

4. Unscrew 4 screws from 2x2’s that secures machines to pallet.

• Lift machine to table top—make sure that table top is strong enough to

hold machine for long period of time, machines weight is 220 lbs so if

table is not strong enough can warp top or break table in long term.

5. Remove 2x2’s from bottom of machine when on tabletop.

• Replace screws back on machine after 2x2’s have been removed. (Optional)

 Install/Training

Follow Install Checklist for set-up

1. Inspect machine and room conditions

2. Level Machine (Pull platen out very slowly for level placement)

3. Open cover - Remove cardboard holder(s) from tubes and maintenance

station.

4. Lower rubber caps by rotating gear on the right side of the maintenance

station, slide head carriage to the center of the machine (this will give you

more room for installing heads)

5. Use jig to make sure maintenance station has not shifted during shipping (see

maintenance station adjustment)

6. Install heads

• Use Rubber Gloves

• First 20 machines will come with heads labeled for each color cartridge.

• Hold heads from metal bracket when installing.

• Careful not to drop heads

 Clip heads in place after its station in the carriage

 Install Ribbon Cable (silver strips to the front)

 Install tube

 Remove protector plate

7. Install waste cartridge (Remove shipping cardboard insert from tray and

install cartridge from accessories box.

8. Install ink cartridges (Store filter cartridges on printer shelf)

9. Connect power cable – Power up

10. Introduce of Ink

• Go into advance test mode to initialize inks

• Press ▼to highlight Version

• Press ▼▲ and cancel in this sequence

• Press ▼to Initial Cleaning and then OK

• When initialize is done back out with enter key or cancel key.

11. Install back cover while the machine is introducing ink; verify customer has

received all other accessories, verify the curing process the customer will be

using is what we recommend.

12. Test Print

• Place 8.5x11 sheet of paper on lower right corner closest to you

• Verify platen height is set to A position

• Press one of the menu button to get into the menu screen

• Press ▼to highlight Test Print

• Press OK

• Select Nozzle Check

• Press OK

• Watch print

Note: Continue to test print until you get all nozzles to fire, you will

need to purge during this process, follow flow chart from your service

manual for reference.

• Turn off printer

13. Install printer driver (File Output) to customers PC without the printer

connected to PC (follow on screen steps).

14. Connect USB cable to PC and Printer and power up the printer, the

installation of the printer driver will auto start (follow on screen steps).

15. Run GT Service Tool from your USB stick (read each screen carefully do not

move forward until the current task is complete)

• Set Printer Date and Time

• Heads Firing Adjustment (To calibrate all heads)

At this point the left side of your installation form should be complete, you are ready to

customize the customer software application (color management, page setup, color

palettes (see Cookbook for reference)) and start training.

Autres manuels pour GT-541

Table des matières

Autres manuels Brother Imprimante

Brother

Brother MFC-L8690CDW Manuel utilisateur

Brother

Brother VC-500W Manuel utilisateur

Brother

Brother ADS-3100 Manuel technique

Brother

Brother WL-660 Series Manuel utilisateur

Brother

Brother HL-1850 Manuel utilisateur

Brother

Brother MFC-1813 Manuel d'utilisation

Brother

Brother DCP-T220 Manuel utilisateur

Brother

Brother 1435 - HL B/W Laser Printer Guide de démarrage rapide

Brother

Brother HL-1110 Manuel utilisateur

Brother

Brother PCL Manuel du produit

Brother

Brother HL- SERIES Manuel utilisateur

Brother

Brother HL-L2405W Manuel utilisateur

Brother

Brother LW-810icBL Manuel utilisateur

Brother

Brother MFC-J5945DW Manuel utilisateur

Brother

Brother DCP-C421W Manuel utilisateur

Brother

Brother DCP 110c - Color Flatbed Multi-Function... Guide de démarrage rapide

Brother

Brother HL-7050 Series Manuel utilisateur

Brother

Brother MFC-J2340DW Manuel utilisateur

Brother

Brother DCP-T420W Manuel utilisateur

Brother

Brother HL-2400Ce Series Manuel utilisateur

Brother

Brother HL-2270DW Manuel utilisateur

Brother

Brother dcp 9020 cdn Manuel utilisateur

Brother

Brother HL-1270N Manuel utilisateur

Brother

Brother m-PRINT MW-100 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur