Broseley Evolution Endure Guide d'installation

BALFLUE01 19/06/2017

Endure Balanced Flue Gas Stove

Stove Body (with bracket) Fitting Instruction

Your balanced flue stove will be supplied in two main components (Stove body with bracket and the

balanced flue gas burner).

Prior to installing the balanced flue gas burner as described in instruction P-XX1561 Issue 2

(200757_01_BM-07) the following sequence will guide you through attaching the stove body to the

balanced flue gas burner.

-- IMPORTANT –READ THIS FIRST BEFORE COMMENCING INSTALLATION --

BALFLUE01 19/06/2017

1.0

Please note the stove body will be delivered upside down on the pallet.

Remove the transit bracket to enable the stove body to be removed from the pallet, now remove

the front two bolts to disconnect the securing bracket from the stove.

Transit Bracket

Front Bolts

BALFLUE01 19/06/2017

2.0

Next attach the bracket to the balanced flue gas burner. Remove four screws from the flue collar of

the balanced flue gas burner and place bracket over the collar, once in place secure the bracket with

the four screws ensuring screws are tightened.

Bracket (showing hole for the flue

collar and 4x screw fixing points).

BALFLUE01 19/06/2017

3.0

Now the bracket has been fitted to the balanced flue gas burner the four arms of the bracket will

need to be adjusted so it can be fastened to the wall, to adjust the arms loosen the nuts / bolts and

fully remove the bolts.

Adjust them to the required distance and reinsert the bolts ensuring the nuts are fully tightened.

Drill and plug the wall with suitable wall plugs (not supplied).

The balanced flue gas burner can now be installed as per installation instructions P-XX1561 Issue 1

(200757_01_BM-07).

BALFLUE01 19/06/2017

4.0

Once the balanced flue gas burner installation is complete the stove body can be fitted. To do this

offer the stove body up to the balanced flue gas burner ensuring it is central and the holes in the top

spigot hole line up with the two holes in the top of the bracket which is fastened to the balanced

flue gas burner.

Using the two bolts provided fasten down through the stove body into the bracket.

The installation of the product is now complete.

Finally place the ash pan cover into position at the

base of the stove body, the ash pan cover is free

standing as it will need to be removed to operate

the appliance. Once the appliance has been lit the

ash pan cover can be replaced. A blanking plate is

provided and will sit loosely on the top of the

stove to conceal the bracket fixings. Alternatively

a dummy flue spigot can be provided as an option

to sit in this position (to enable a dummy flue pipe

to be connected –not supplied). To attach the

dummy spigot securely use the three bolts

provided (two of which are actually the bracket

bolts).

Blanking Plate

Table des matières

Autres manuels Broseley Poêle

Broseley

Broseley Lincoln Manuel

Broseley

Broseley Canterbury PD-08-002 Manuel utilisateur

Broseley

Broseley Lincoln Manuel

Broseley

Broseley York Midi Manuel

Broseley

Broseley YORK Manuel utilisateur

Broseley

Broseley Evolution 5 MK2 Manuel

Broseley

Broseley Serrano 3 Manuel utilisateur

Broseley

Broseley Ignite 5 Manuel

Broseley

Broseley IGNITE 5 CD1 MK2 Manuel

Broseley

Broseley YORK Manuel utilisateur

Broseley

Broseley Canterbury Manuel

Broseley

Broseley York Grande Manuel utilisateur

Broseley

Broseley WINCHESTER Manuel utilisateur

Broseley

Broseley WINCHESTER Manuel utilisateur

Broseley

Broseley Ignite 5 Manuel

Broseley

Broseley Canterbury Manuel

Broseley

Broseley York Midi SE Manuel

Broseley

Broseley evolution Ignite 5 Widescreen Manuel

Broseley

Broseley Canterbury Manuel utilisateur

Broseley

Broseley Desire Manuel

Broseley

Broseley York Midi Manuel utilisateur

Broseley

Broseley Q7 Manuel

Broseley

Broseley 12B Manuel

Broseley

Broseley Lincoln Manuel utilisateur

Manuels Poêle populaires d'autres marques

Arada

Arada Cassette Stove Manuel utilisateur

Parmco

Parmco FS 600 Manuel utilisateur

MCZ

MCZ SUITE AIR 10 M2 Manuel utilisateur

HearthStone

HearthStone Stowe DV 8321 Guide de dépannage

Cattara

Cattara FAMILY Manuel utilisateur

Stanley

Stanley Argon F500 OVAL Manuel utilisateur

Avalon

Avalon B-VENT Manuel utilisateur

Nordpeis

Nordpeis Vega Manuel utilisateur

Exquisit

Exquisit EKC601-5 Manuel d'utilisation

Stanley

Stanley Oisin Oil MK II Manuel du propriétaire

Thermocet

Thermocet Brookfield S/CC Manuel utilisateur

HASE

HASE delhi Manuel utilisateur

Vermont Castings

Vermont Castings Intrepid 2 Manuel utilisateur

Italiana Camini

Italiana Camini CLASSICA Guide de démarrage rapide

Avalon

Avalon Vashon Avanti DVS FS Manuel utilisateur

Spartherm

Spartherm ambiente a1 Manuel utilisateur

Dimplex

Dimplex MCFSTV12AU Manuel utilisateur

Warmlite

Warmlite WL46040 Manuel utilisateur