3
www.bromic.com/plumbing
WARNINGS
Read and follow operating instructions and warnings and familiarize yourself with the
torch before lighting or using. Review instructions and warnings periodically to maintain
awareness.
- Keep the torch out of the reach of children.
- Extremely flammable contents under pressure.
- Maintain good ventilation.
- Always wear goggles and protective gloves and use proper tools to handle hot
work.
- Never breathe in welding/soldering fumes.
- Do not puncture or incinerate.
- Never attempt to modify the torch construction, use unapproved accessories or
fuels or attempt to repair a damaged torch.
- Do not drop the torch as the unit might be damaged and ceramic could be
broken
- Never store at temperature above 45°C such as in a car or prolonged sunlight.
- Follow refilling procedure to avoid serious accidents.
- Do not ignite the torch near the face, hands, clothing or flammable materials.
- Please note the butane flame may be barely visible in certain light conditions.
- Allow the torch to cool down before storage.
- Ensure flame extinguished and gas o after each use.
- Never attempt to use torch as a cigarette lighter.
- Be extra careful when using the torch outdoors on sunny or windy days.
- Wind may carry the torch’s heat back toward you or other areas not intended to
be heated.
- Never use a torch to remove lead-based paint indoors or in any confined area.
- Always check to make sure no intended parts or materials are being heated.
- Whenever there is a possibility that unintended material has been heated, wait
at least two hours before leaving the area.
- Be especially careful to avoid fumes from cadmium, plating and galvanized
metal.
- Beware that the torch tip and accessories get hot during use.
- Be sure not to point the torch in a direction which would cause nearby objects
to ignite.
- Always have a fire extinguisher and a bucket of water near the torch and work
area.
- Do not use water to cool down the torch; it will damage the product.
- Store and transport the container upright.
- After use, please wait 5 minutes until confirming the torch extinguished and
cooled down.
