Brocade Communications Systems FastIron SX 800 Manuel utilisateur

53-1002965-01

30 September 2013

Brocade FastIron, FCX, ICX,

and TurboIron

Diagnostic Reference

Supporting FastIron Software Release 08.0.01

ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, and

Vyatta are registered trademarks, and HyperEdge, The Effortless Network, and The On-Demand Data Center are trademarks of

Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names

mentioned may be trademarks of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning

any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to

this document at any time, without notice, and assumes no responsibility for its use. This informational document describes

features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.

Export of technical data contained in this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with

respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that

accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other

open source license agreements. To find out which open source software is included in Brocade products, view the licensing

terms applicable to the open source software, and obtain a copy of the programming source code, please visit

http://www.brocade.com/support/oscd.

Brocade Communications Systems, Incorporated

Document History

Corporate and Latin American Headquarters

Brocade Communications Systems, Inc.

130 Holger Way

San Jose, CA 95134

Tel: 1-408-333-8000

Fax: 1-408-333-8101

E-mail: inf[email protected]

Asia-Pacific Headquarters

Brocade Communications Systems China HK, Ltd.

No. 1 Guanghua Road

Chao Yang District

Units 2718 and 2818

Beijing 100020, China

Tel: +8610 6588 8888

Fax: +8610 6588 9999

E-mail: [email protected]

European Headquarters

Brocade Communications Switzerland Sàrl

Centre Swissair

Tour B - 4ème étage

29, Route de l'Aéroport

Case Postale 105

CH-1215 Genève 15

Switzerland

Tel: +41 22 799 5640

Fax: +41 22 799 5641

E-mail: emea-i[email protected]

Asia-Pacific Headquarters

Brocade Communications Systems Co., Ltd. (Shenzhen WFOE)

Citic Plaza

No. 233 Tian He Road North

Unit 1308 – 13th Floor

Guangzhou, China

Tel: +8620 3891 2000

Fax: +8620 3891 2111

E-mail: [email protected]

Title Publication number Summary of changes Date

Brocade FastIron, FCX, ICX, and

TurboIron Diagnostic Reference

53-1002645-01 Release 07.4.00 document

updated with

enhancements in Release

08.0.00.

April 2013

Brocade FastIron, FCX, ICX, and

TurboIron Diagnostic Reference

53-1002645-02 Release 08.0.00 document

updated for Release

08.0.00a.

June 2013

Brocade FastIron, FCX, ICX, and

TurboIron Diagnostic Reference

53-1002965-01 Release 08.0.00a

document updated for

Release 08.0.01.

September 2013

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference iii

53-1002965-01

Contents

About This Guide

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Supported Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Unsupported features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

What’s new in this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Command syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Notes and caution notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Getting technical help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Chapter 1 Using Diagnostic Commands

Using debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brief and detail debug options . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Generic debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Disabling debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 2 System Level and Layer 1 Diagnostics

Layer 1 debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Hardware backplane debug command . . . . . . . . . . . . . . . . . . . . 5

Loop detect debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Port debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

System debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Software licensing debug command . . . . . . . . . . . . . . . . . . . . . . . . .12

Chapter 3 Layer 2 Diagnostics

STP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

RSTP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

MSTP debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DHCP debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

GVRP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

iv Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference

53-1002965-01

MAC address debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

MCT debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

MCT show commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Packet-capture debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Link aggregation debug commands . . . . . . . . . . . . . . . . . . . . . . . . . 47

Chapter 4 IP Diagnostics

ARP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

BGP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

DHCP snooping debug commands . . . . . . . . . . . . . . . . . . . . . . . . . .56

GRE debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

ICMP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

OSPF debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

RIP debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

NTP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Source Guard debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

SSH debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Synchronization debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . 77

TCP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

UDP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

VRRP and VRRP-E debug commands . . . . . . . . . . . . . . . . . . . . . . . . 81

Web debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Chapter 5 IPv6 Diagnostics

General IPv6 debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

IPv6 MLD debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

IPv6 OSPF debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

DHCPv6 debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

DHCPv6 show commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

IPv6 PIM debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

IPv6 RIP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

Chapter 6 Multicast Diagnostics

MSDP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

IGMP debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

IGMP snooping debug commands. . . . . . . . . . . . . . . . . . . . . . . . . .150

PIM debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

PIM-SM snooping debug commands. . . . . . . . . . . . . . . . . . . . . . . .164

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference v

53-1002965-01

MLD snooping debug commands . . . . . . . . . . . . . . . . . . . . . . . . . .167

Chapter 7 Security Diagnostics

ACL debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

802.1x debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

MAC authentication debug commands . . . . . . . . . . . . . . . . . . . . . .172

sFlow debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173

IP security debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

Web events debug commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

Web authentication debug commands . . . . . . . . . . . . . . . . . . . . . . 176

RA guard debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

Chapter 8 supportsave Diagnostics

supportsave overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

supportsave commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

Limitations and pre-requisites . . . . . . . . . . . . . . . . . . . . . . . . .179

Recovery during continuous reload . . . . . . . . . . . . . . . . . . . . .183

Chapter 9 Technical Support Diagnostics

show tech-support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185

Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

Diagnostic Command Index

vi Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference

53-1002965-01

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference vii

53-1002965-01

About This Guide

This chapter contains the following sections:

•Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

•Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

•Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

•What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

•Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

•Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

•Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

•Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Introduction

This guide describes many common diagnostic processes for the Brocade FastIron devices. Each

chapter contains diagnostic information about a specific segment of your network configuration.

Supported Hardware

•FastIron X Series devices (chassis models):

•Brocade FastIron SX 800

•FastIron SX 1600

•Brocade FCX Series (Brocade FCX) Stackable Switch

•Brocade ICX 6610 (ICX 6610) Stackable Switch

•Brocade ICX 6430 Series (ICX 6430)

•Brocade ICX 6450 Series (ICX 6450)

•Brocade ICX 6650 Series (ICX 6650)

•Brocade TurboIron 24X Series

For information about the specific models and modules supported in a product family, refer to the

hardware installation guide for that product family. “Related publications” on page x lists the

hardware installation guides and software configuration guides.

NOTE

The Brocade ICX 6430-C switch supports the same feature set as the Brocade ICX 6430 switch

unless otherwise noted.

viii Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference

53-1002965-01

NOTE

The Brocade ICX 6450-C12-PD switch supports the same feature set as the Brocade ICX 6450

switch unless otherwise noted.

NOTE

Some debug commands report information about internal hardware settings and registers that is

relevant primarily to the Brocade engineering staff. Consequently, this information is not described

in this document.

Unsupported features

Features that are not documented in “Related publications” on page x are not supported.

Audience

This document is designed for network engineers with a working knowledge of Layer 2 and Layer 3

switching and routing.

If you are using a Brocade Layer 3 switch, you should be familiar with the following protocols if

applicable to your network – IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, DVMRP, and VRRP.

Disclaimer

This manual is provided without any warranty of any kind, expressed or implied. When using this

manual to troubleshoot Brocade products, you assume all risk as to the quality and performance of

the debug procedures. Brocade assumes no liability for any damages, including general, special,

incidental, or consequential damages arising from the use of the procedures in this manual

(including, but not limited to any loss of profit or savings, loss of data, or failure to successfully

troubleshoot network problems).

Debug information may be changed or updated without notice. You are responsible for obtaining

newer versions of this manual when they are made available. The procedures in this document are

not intended as a substitute for the expertise of qualified technicians.

Enabling debug commands can seriously degrade system performance. Debug commands are

generally intended for use when troubleshooting specific problems while working with qualified

service technicians, or in conjunction with calls to Brocade Technical Support. Whenever possible,

troubleshoot your system during periods of low network traffic and user activity to preserve system

performance.

If you have any questions regarding this disclaimer please contact us at

http://www.brocade.com/products/all/routers/index.page.

What’s new in this document

There are no enhancements for FastIron release 08.0.01.

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference ix

53-1002965-01

Document conventions

This section describes text formatting conventions and important notice formats used in this

document.

Text formatting

The narrative-text formatting conventions that are used are as follows:

For readability, command names in the narrative portions of this guide are presented in mixed

lettercase: for example, switchShow. In actual examples, command lettercase is all lowercase.

Command syntax conventions

Command syntax in this manual follows these conventions:

Notes and caution notices

The following notices and statements are used in this manual. They are listed below in order of

increasing severity of potential hazards.

NOTE

A note provides a tip, guidance, or advice, emphasizes important information, or provides a

reference to related information.

ATTENTION

An Attention statement indicates potential damage to hardware or data.

bold text Identifies command names

Identifies the names of user-manipulated GUI elements

Identifies keywords

Identifies text to enter at the GUI or CLI

italic text Provides emphasis

Identifies variables

Identifies document titles

code text Identifies CLI output

command and

parameters

Commands and parameters are printed in bold.

[ ] Optional parameter.

variable Variables are printed in italics.

... Repeat the previous element, for example “member[;member...]”

| Choose from one of the parameters.

xBrocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference

53-1002965-01

CAUTION

A Caution statement alerts you to situations that can be potentially hazardous to you or cause

damage to hardware, firmware, software, or data.

Related publications

The following Brocade documents supplement the information in this guide and can be located at

http://www.brocade.com/ethernetproducts.

•FastIron Ethernet Switch Administration Guide, 08.0.01

•FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide, 08.0.01

•FastIron Ethernet Switch Layer 3 Routing Configuration Guide, 08.0.01

•FastIron Ethernet Switch IP Multicast Configuration Guide, 08.0.01

•FastIron Ethernet Switch Security Configuration Guide, 08.0.01

•FastIron Ethernet Switch Software Upgrade Guide, 08.0.01

•FastIron Switch Stacking Configuration Guide, 08.0.01

•FastIron Ethernet Switch Traffic Management Guide, 08.0.01

•FastIron Ethernet Switch Software Licensing Guide, 08.0.01

•FastIron Feature Support Matrix, 08.0.01

•Brocade TurboIron 24X Series Configuration Guide, 08.0.01

•Brocade ICX 6430-C Switch Installation Guide, 08.0.01

•Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide, 08.0.01

•Brocade FCX Series Hardware Installation Guide, 08.0.01

•Brocade FastIron ICX 6610 Stackable Switch Hardware Installation Guide, 08.0.01

•Brocade ICX 6650 Ethernet Switch Installation Guide, 08.0.01

•Brocade FastIron SX Series Chassis Hardware Installation Guide, 08.0.01

•Brocade TurboIron 24X Series Hardware Installation Guide, 08.0.01

•Brocade ICX 6450-C12-PD Switch Installation Guide, 08.0.01

•Unified IP MIB Reference, 08.0.01

Getting technical help

To contact Technical Support, go to http://www.brocade.com/services-support/index.page for the

latest e-mail and telephone contact information.

Autres manuels pour FastIron SX 800

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Brocade Communications Systems Changer