Brocade Communications Systems DCX 8510-4 Guide rapide de l'utilisateur

53-1002177-06

19 August 2013

Brocade DCX 8510-4

Backbone

Hardware Reference Manual

ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, and

Vyatta are registered trademarks, and HyperEdge, The Effortless Network, and The On-Demand Data Center are trademarks of

Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names

mentioned may be trademarks of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning

any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to

this document at any time, without notice, and assumes no responsibility for its use. This informational document describes

features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.

Export of technical data contained in this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with

respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that

accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other

open source license agreements. To find out which open source software is included in Brocade products, view the licensing

terms applicable to the open source software, and obtain a copy of the programming source code, please visit

http://www.brocade.com/support/oscd.

Brocade Communications Systems, Incorporated

Document History

Corporate and Latin American Headquarters

Brocade Communications Systems, Inc.

130 Holger Way

San Jose, CA 95134

Tel: 1-408-333-8000

Fax: 1-408-333-8101

E-mail: inf[email protected]om

Asia-Pacific Headquarters

Brocade Communications Systems China HK, Ltd.

No. 1 Guanghua Road

Chao Yang District

Units 2718 and 2818

Beijing 100020, China

Tel: +8610 6588 8888

Fax: +8610 6588 9999

E-mail: [email protected]

European Headquarters

Brocade Communications Switzerland Sàrl

Centre Swissair

Tour B - 4ème étage

29, Route de l'Aéroport

Case Postale 105

CH-1215 Genève 15

Switzerland

Tel: +41 22 799 5640

Fax: +41 22 799 5641

E-mail: emea-i[email protected]

Asia-Pacific Headquarters

Brocade Communications Systems Co., Ltd. (Shenzhen WFOE)

Citic Plaza

No. 233 Tian He Road North

Unit 1308 – 13th Floor

Guangzhou, China

Tel: +8620 3891 2000

Fax: +8620 3891 2111

E-mail: [email protected]

Title Publication number Summary of changes Date

Brocade DCX 8510-4 Backbone Hardware

Reference Manual

53-1002180-01 New document. April 2011

Brocade DCX 8510-4 Backbone Hardware

Reference Manual

53-1002180-02 Updated filler panel graphics,

CP replacement procedures for

7.0, and data transmission

ranges information.

June 2011

Brocade DCX 8510-4 Backbone Hardware Reference Manual 3

53-1002177-06

Brocade DCX 8510-4 Backbone Hardware

Reference Manual

53-1002180-03 Updated power supply

requirements data, power

supply replacement information,

ISL trunking totals, inter-chassis

link information.

July 2011

Brocade DCX 8510-4 Backbone Hardware

Reference Manual

53-1002180-04 Added new blades, FC8-32E,

FC8-48E, and enhanced ICL

capability.

December 2011

Brocade DCX 8510-4 Backbone Hardware

Reference Manual

53-1002180-05 Added Preparing for WWN card

replacement section.

May 2012

Brocade DCX 8510-4 Backbone Hardware

Reference Manual

53-1002177-06 Clarified support for for shared

blades. Corrected FOS version

required for certain blades.

Corrected slot numbering order.

Aug 2013

Title Publication number Summary of changes Date

4Brocade DCX 8510-4 Backbone Hardware Reference Manual

53-1002177-06

Brocade DCX 8510-4 Backbone Hardware Reference Manual iii

53-1002177-06

Contents

About This Document

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

What’s new in this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Command syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Command examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Notes, cautions, and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

Brocade resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

Other industry resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Getting technical help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii

Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Chapter 1 Overview

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brocade DCX 8510-4 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brocade DCX 8510-4 hardware components . . . . . . . . . . . . . . . . . . . 2

Port side of the Brocade DCX 8510-4 . . . . . . . . . . . . . . . . . . . . . 4

Nonport side of the Brocade DCX 8510-4 . . . . . . . . . . . . . . . . . . 6

Brocade DCX 8510-4 blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

High availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Serviceability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Software features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Network manageability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 2 Installation of the Brocade DCX 8510-4

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Time and items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

iv Brocade DCX 8510-4 Backbone Hardware Reference Manual

53-1002177-06

Preparing for the Brocade DCX 8510-4 installation . . . . . . . . . . . . . 14

Unpacking and installing the Brocade DCX 8510-4 . . . . . . . . . . . . . 16

Items included with the Brocade DCX 8510-4 . . . . . . . . . . . . . . . . . 17

Providing power to the Brocade DCX 8510-4 . . . . . . . . . . . . . . . . . . 17

Port numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Chassis slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Cable management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

High density cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Installing QSFP cables (optional) . . . . . . . . . . . . . . . . . . . . . . . . 21

Chapter 3 Logging In and Configuring the Brocade DCX 8510-4

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Configuring the Brocade DCX 8510-4 . . . . . . . . . . . . . . . . . . . . . . . . 23

Establishing a serial connection to the Brocade DCX 8510-4 . . . . . 24

Logging in to the serial console port . . . . . . . . . . . . . . . . . . . . . . . . .25

Configuring the IP addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Logging off the serial console port and disconnecting the

serial cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Establishing an Ethernet connection to the

Brocade DCX 8510-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Customizing a switch name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Customizing a chassis name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Setting the domain ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting the date and time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting the date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting the time zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Synchronizing local time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Verifying the PID mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Determining installed software licenses . . . . . . . . . . . . . . . . . . . . . . 32

Installing transceivers and attaching cables. . . . . . . . . . . . . . . . . . . 32

Installing SFP+ and mSFP transceivers and cables . . . . . . . . .32

Installing QSFP transceivers and cables . . . . . . . . . . . . . . . . . . 33

Managing cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Verifying correct operation and backing up the configuration. . . . .35

Powering off the Brocade DCX 8510-4 . . . . . . . . . . . . . . . . . . . . . . .36

Chapter 4 Monitoring System Components

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Monitoring overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Brocade DCX 8510-4 Backbone Hardware Reference Manual v

53-1002177-06

Determining the status of a port or application blade . . . . . . . . . . .42

Blade illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Determining the status of a control processor blade (CP8). . . . . . . 49

Determining the status of a core switch blade (CR16-4) . . . . . . . . . 50

Determining the status of a power supply. . . . . . . . . . . . . . . . . . . . . 52

Determining the status of a blower assembly. . . . . . . . . . . . . . . . . .53

Determining the status of a WWN card . . . . . . . . . . . . . . . . . . . . . . . 54

Chapter 5 Removal and Replacement Procedures

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

ESD precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Chassis door removal and replacement . . . . . . . . . . . . . . . . . . . . . .58

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Removing a chassis door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Replacing a chassis door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Vertical cable management fingers removal and replacement. . . . 59

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Removing a cable management finger assembly . . . . . . . . . . . 59

Replacing a cable management finger assembly . . . . . . . . . . . 60

Port, application, and encryption blade removal and

replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Removing a blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Replacing a blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Blade filler panel removal and replacement. . . . . . . . . . . . . . . . . . .64

Removing a filler panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Replacing a filler panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Control processor blade (CP8) removal and replacement . . . . . . . .65

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Faulty CP blade indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Recording critical Brocade DCX 8510-4 information. . . . . . . . . 67

Removing a control processor blade (CP8) . . . . . . . . . . . . . . . . 68

Replacing a control processor blade (CP8) . . . . . . . . . . . . . . . .69

Verifying operation of the new CP blade. . . . . . . . . . . . . . . . . . .70

Completing the replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Core switch blade (CR16-4) removal and replacement . . . . . . . . . .75

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Faulty core switch blade indicators . . . . . . . . . . . . . . . . . . . . . .75

Removing a core switch blade (CR16-4) . . . . . . . . . . . . . . . . . .75

Replacing a core switch blade (CR16-4) . . . . . . . . . . . . . . . . . . 76

vi Brocade DCX 8510-4 Backbone Hardware Reference Manual

53-1002177-06

Power supply removal and replacement . . . . . . . . . . . . . . . . . . . . . . 77

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Identifying power supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Removing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Replacing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Blower assembly removal and replacement . . . . . . . . . . . . . . . . . . .79

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Removing a blower assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Replacing a blower assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

WWN card removal and replacement . . . . . . . . . . . . . . . . . . . . . . . . 81

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Verifying the need for replacement . . . . . . . . . . . . . . . . . . . . . .82

Preparing for the WWN card replacement . . . . . . . . . . . . . . . . .82

Removing the WWN card and WWN bezel (logo plate) . . . . . . .82

Replacing the WWN card and WWN bezel (logo plate) . . . . . . . 83

Transceiver removal and replacement . . . . . . . . . . . . . . . . . . . . . . . 84

Removing an SFP+ transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . 85

Replacing an SFP+ transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Removing and replacing an mSFP optical transceiver . . . . . . .86

Inter-chassis link (QSFP) cable removal and replacement. . . . . . . .88

Time and items Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Removing an ICL cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Replacing an ICL cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Possible ICL configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Brocade DCX 8510-4 chassis removal and replacement. . . . . . . . .93

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Faulty Brocade DCX 8510-4 chassis indicators. . . . . . . . . . . . . 94

Recording critical Brocade DCX 8510-4 and

SAN information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Disconnecting from network and fabric . . . . . . . . . . . . . . . . . . . 98

Removing components from the chassis . . . . . . . . . . . . . . . . . . 99

Installing the replacement chassis. . . . . . . . . . . . . . . . . . . . . . . 99

Installing components into the new chassis . . . . . . . . . . . . . .100

Downloading the configuration. . . . . . . . . . . . . . . . . . . . . . . . .101

Verifying correct operation of system . . . . . . . . . . . . . . . . . . . .101

Reconnecting the system to the network and fabric . . . . . . . .103

Verifying correct configuration of the fabric. . . . . . . . . . . . . . .104

Cable routing table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Appendix A Specifications

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

System architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

System size and weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

System blade and FRU weights . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Facility requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Brocade DCX 8510-4 Backbone Hardware Reference Manual vii

53-1002177-06

Fibre Channel port specifications . . . . . . . . . . . . . . . . . . . . . . . . . .112

Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Power cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

Power-cord notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Power-cord notice (Japan, DENAN) . . . . . . . . . . . . . . . . . . . . . . 117

Data transmission ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Qualified cables for the FC8-64 port blade. . . . . . . . . . . . . . . . . . .118

Safety notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

FCC warning (US only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

KCC statement (Republic of Korea) . . . . . . . . . . . . . . . . . . . . .119

VCCI statement (Japan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

BSMI statement (Taiwan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

CE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Canadian requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

German statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Laser compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Regulatory compliance standards . . . . . . . . . . . . . . . . . . . . . .121

Environmental regulation compliance . . . . . . . . . . . . . . . . . . . . . . .121

China RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Appendix B Application and Encryption Blades

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

FS8-18 blade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

FX8-24 blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

Appendix C Diagnostics and Troubleshooting

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Obtaining chassis and component status. . . . . . . . . . . . . . . . . . . .130

Interpreting POST and boot results . . . . . . . . . . . . . . . . . . . . . . . . .130

POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

Boot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Appendix D Port Numbering Template

Index

viii Brocade DCX 8510-4 Backbone Hardware Reference Manual

53-1002177-06

Autres manuels pour DCX 8510-4

Table des matières

Autres manuels Brocade Communications Systems Changer