Broadata LBH-H-T/R-EAD-ICP Manuel utilisateur
LBH-H-T/R-EAD-ICP
LINK BRIDGETM HBASETHDMI
TRANSMISSION SYSTEM WITH EXTERNAL
AUDIO AND INLINE CONTROL PROCESSOR
BCI reserves the right to make changes to the products described herein without prior
notice or consent. No liability is assumed as a result of their use or application. All
rightsreserved.
©2015 Broadata Communications, Inc.
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/ExternalAudio and Inline Control Processor
SAFETY INSTRUCTIONS AND
COMPLIANCE DECLARATIONS
PLEASE OBSERVE THE FOLLOWING SAFETY
PRECAUTIONS
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be
damaged by electrical spikes, surges, electric shock, lightning strikes,
etc. Use of surge protection systems is highly recommended in order
to protect and extend the life of your equipment.
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/External Audio and Inline Control Processor
Broadata Technical Support, (800) 214-0222
4
TABLE OF CONTENTS
1.0 PRODUCT DESCRIPTION ..............................................5
2.0 OPERATION CONTROL AND FUNCTIONS ...................6
2.1 TRANSMITTER EXTENDER FRONT AND REAR
PANELS ...........................................................................6
2.2 RECEIVER EXTENDER FRONT AND REAR PANEL.....7
2.3 ICP FRONT AND REAR PANEL .....................................8
3.0 CONNECTOR PINOUT ASSIGNMENT ...........................9
3.1 EXTENDER ......................................................................9
3.1.1 SERIAL DATA INTERFACE............................................9
3.1.2 STATUS LEDS .............................................................10
3.2 ICP .................................................................................11
3.3 LB-KP8 ...........................................................................12
4.0 LB-ICP WEB SERVER DESCRIPTION .........................14
5.0 SPECIFICATIONS...........................................................34
6.0 SERVICE PROCEDURE ................................................37
6.1 REPLACEMENT POLICY ..............................................37
6.2 RETURN AND REPAIR SERVICE .................................37
7.0 LIMITED WARRANTY ....................................................38
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/ExternalAudio and Inline Control Processor
1.0 PRODUCT DESCRIPTION
Overall
•An HDBaseT HDMI extender with external audio ports and
multimple control I/O ports
•Not only extend HDMI video, but also provide in-line control
I/O paths, over HDBaseT link
Extender
•Extend HDMI, external stereo audio, and RS-232/IR up to 100
meters over 1 CAT-5e/6 cable
•Full HDTV video resolution for 4K2K and 1080p/1080i/720p
•Fully uncompressed video and audio, provides zero loss of
quality
•SupportsTrueDDC/EDID/HDCP transmission
•Bi-directionalPOH
Inline Control Processor (ICP)
•Control I/O ports contain:
- two (2) RS-232
- two (2) Relay
- two (2) Digital I/O
- one (1) IR
- one (1) Ethernet
•Control and monitorAV devices using a standard Ethernet
•Front panel port status indicators
•Userfriendlycustomizablecontrol configurations viabuilt-in
web server
ORDERING INFORMATION
LBH-H-EAD-T-ICP Link Bridge HDMI Transmitter w/Audio,
RS-232 and Control I/O Ports
LBH-H-EAD-R-ICP Link Bridge HDMI Receiver w/Audio,
RS-232 and Control I/O Ports
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/External Audio and Inline Control Processor
Broadata Technical Support, (800) 214-0222
6
2.0 OPERATION CONTROLSAND FUNCTIONS
2.1 Transmitter Extender Front and Rear Panel
1. Power/Link: The red LED indicates the unit is powered up.
The green LED indicates that the unit has a good HDBT
connection.
ICP Extender
ICP Extender
ICPExtender
TX
Front
RX
Front
TX or R
X
Rear
10
123456
7
8
9
TX
Extender/Front
11
TX
Extender/Rear
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/ExternalAudio and Inline Control Processor
2. HDCP LED: The blue LED is lighted when HDCP video is
present.TheblueLEDblinkswhennon-HDCPvideoispresent.
3. SPDIFLED: LightedwhencorrespondingSPDIFaudioisactive.
4. DATALEDs:Lightedwhencorresponding inputoroutput ports
are active.
5. L/R LED: Lighted when corresponding audio is active.
6. DATA: RS-232 pass-through data connector.
7. IR: IR pass-through IR connector.
8. SPDIF: SPDIF audio input connector.
9. L/R: L/R audio input connector.
10. HDMI IN: HDMI video input connector.
11. HDBT: HDBT CAT-5e/6/7 cable connector.
2.2 Receiver Extender Front and Rear Panel
1. Power/Link: The red LED indicates the unit is powered up.
The green LED indicates that the unit has a good HDBT
connection.
2. HDCP LED: The blue LED is lighted when HDCP video is
present.TheblueLEDblinkswhennon-HDCPvideoispresent.
3. SPDIFLED: LightedwhencorrespondingSPDIFaudioisactive.
4. DATALEDs:Lightedwhencorresponding inputoroutput ports
are active.
5. L/R LED: Lighted when corresponding audio is active.
6. DATA: RS-232 pass-through data connector.
10
123456
7
8
9
RX
Extender/Front
11
RX
Extender/Rear
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/External Audio and Inline Control Processor
Broadata Technical Support, (800) 214-0222
8
7. IR: IR pass-through IR connector.
8. SPDIF: SPDIF audio output connector.
9. L/R: L/R audio output connector.
10. HDMI IN: HDMI video output connector.
11. HDBT: HDBT CAT-5e/6/7 cable connector.
2.3 ICP Front and Rear Panel
1. Digital I/O: Digital input/output ports.
2. Digital I/OLEDs: Lightwhen thecorrespondingportsareactive
high.
3. RS-232: Serial port to control devices.
4. RS-232 LEDs: Light when the corresponding RS-232 ports
are active.
5. REM LED: Light when the unit is set as a remote unit.
6. IR LED: Light when the IR out are active.
7. RELAYLED:Light whenthe corresponding,normallyopenpins,
are closed.
8. RELAY: Normally open and normally closed relay ports.
9. AUX-In and AUX-Out: Reserved.
10. DC12V: DC power input connector.
11. IR Out: IR blaster port.
12
34
56
7
89ICP Fron
t
10
ICP Back
11 12
13
14 15 16 17
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/ExternalAudio and Inline Control Processor
12. SW: The unit configuration dip switch
13. IR Learner: Built-in IR receiver for IR learning.
14. IR Learner LED: Lighted when the unit is IR learning mode.
15. CONFIG: Configuration/keypad port
16. LAN: Ethernetconnector.
17. RESET: Press the button to reset the device back to factory
default settings.
3.0 CONNECTOR PINOUT ASSIGNMENT
3.1 Extender
3.1.1 Serial Data Interface
Each LBH-H-EAD-ICP unit can be used for RS-232 and IR
interface.
RS-232/ IR Data
The LBH-H-EAD-ICP transmits two channels of data
signals. Follow the procedures for installing data terminal
devices.
1. Label and connect one serial data cable to the user’s
RS-232 or IR device.
2. Connect the other end of this cable to the front panel
data terminal block connector on the
LBH-H-EAD-ICP (see below).
RS-232/IR Terminal block pinout
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/External Audio and Inline Control Processor
Broadata Technical Support, (800) 214-0222
10
3.1.2 Status LED’s
Additional status LED’s are provided for the user to indicate
the presence of HDCP video, audio presence and data
presence. These are to assist the user in identifying right from
thefrontpanelwhetheragivensignalispresentfortransmission
andaidinthetroubleshootingprocessif agivensignalismissing.
HDCP LED: Will be solid LED when video
input has a HDCP. It will blink when video
input does not have HDCP.
Data in and Data out LED:
It will be on when the unit
detects data signal.
SPDIF & L/R detect LED.
It will be on when the unit detect
the audio input signal.
LBH-HDMI-EAD-Tx
Out
SPDIF
L/R
IN
HDMI
LINK
PWR/
HDCP DATA
DATA
12543 SPDIF
AUDIO
L/R
IR
In
1221
LBH-HDMI-EAD-Rx
Out
L/R
SPDIF
OUT
HDMI
HDCP
LINK
PWR/
DATA
DATA
AUDIO
IR
12543 L/R
SPDIF
In
1
122
LBH-H-T/R-EAD-ICPUserManual
Link BridgeTM HBaseT HDMI Transmission System w/ExternalAudio and Inline Control Processor
3.2 LB-ICP
Front
Digital I/O CH-1
GND
Digital I/O CH-2
GND
GND
Relay 1 Normally Open
Relay 1 Common
Relay 1 Normally Closed
Reserved/Do Not Connect
Reserved/Do Not Connect
Digital I/O LEDs
1=I/O Ch-1
2=I/O Ch-2
Remote LED
(On=Remote)
IR TX LED
(On=IR TX Act.)
}
On=High Level
Reserved/Do Not Connect
Reserved/Do Not Connect
Relay 2 Normally Closed
Relay 2 Common
Relay 2 Normally Open
RS-232 OUT CH-2
RS-232 OUT CH-1
GND
RS-232 IN CH-2
RS-232 IN CH-1
1=Relay 1 ON
2=Relay 2 ON
RS-232 LEDs
1=CH-1 Activity
2=CH-2 Activity
Table des matières
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
