19. Press the LEFT arrow key four times.
20. Press the ENTER key. Press the DOWN arrow key to change to English.
21. Press the ENTER key.
23. Press the RIGHT arrow key three times.
24. Press the ENTER key. Press the DOWN arrow key to change to Control Panel Only.
25. Press the ENTER key. Press the SPEED key.
26. Press the DOWN arrow key, repeatedly, until you see the number 5.90, or desired speed
setting for the material you are cutting (see Material Guide Label located on cutter).
21. A BREN Cutters after 2013 also have a Rear Paper Sensor option. If this option appears on
your setup screen, press enter and then the down arrow key to disable it. Press enter to return to the
main setup screen.
22. Press the ON/OFF LINE key. Press the F2 key.
