Bowflex SelectTech 5.1 Manuel utilisateur
SelectTech®5.1 Bench
Owner’s/Assembly Manual
P/N: 000-6189 Rev B (10/03/2006)
i
Important Safety Precautions ...................1
Safety Warning Labels ........................ 2
Before You Assemble ......................... 3
Hardware and Tool Guide .................... 3
Parts Guide ..................................4
Assembly Instructions .........................5
Bench Positions ............................ 10
Companion Exercise Equipment .............. 11
Warranty Information ....................... 12
Bench Maintenance ......................... 12
Important Contact Numbers .................. 16
Table of Contents
Congratulations on your commitment to fitness and your purchase of the Bowflex®
SelectTech®5.1 Bench. Before assembling your Bowflex®SelectTech®5.1 Bench please
read the Owner’s/Assembly Manual and follow the Important Safety Precautions.
Nautilus, Inc.
16400 S.E. Nautilus Drive
Vancouver, Washington, USA 98683
1-800-NAUTILUS (1-800-628-8458)
Fax (800) 898-9410
Nautilus.com
Bowflex.com
1
Important Safety Precautions
WARNING!
Before beginning any exercise program consult your physician or health care professional.
Only he or she can determine the exercise program that is appropriate for your particular
age and condition. If you experience any light-headedness, dizziness, or shortness of
breath while exercising, stop the exercise and consult your physician.
Read all instructions and warning labels
before using the equipment.
- It is your responsibility to read and understand all
warnings and instructions. This is essential to safe
operation.
- Keep your body weight centered on the bench while
exercising.
- Never allow children on the bench. Teenagers should
always have parental supervision when using this
bench.
- Set up and operate bench only on a level surface.
- Make sure you have adequate room to use the
equipment without interference with other objects or
third party.
- Do not wear loose clothing while you are near the
bench.
- Do not exceed the max. user weight of 300 lbs
(136.1 kg).
- Do not exceed the maximum lifting load of 300 lbs
(136.1 kg)
- The approxiamate weight of the bench is 62 lbs (28 kg)
- This bench is not intended for institutional use.
- Before exercising, make sure the back and seat
supports are securely fastened and the bench is firmly
in place.
- Inspect your bench before each workout. Periodically
check all fasteners to make sure none have loosened
with use.
- Never attempt to exercise with more resistance than
you are physically able to handle.
- For safety, it is recommended that you exercise with a
training partner or spotter.
- Do not use the bench if any component is found worn
or damaged.
Used to call attention to POTENTIAL hazards that could
result in personal injury or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
The following definition applies to the word “WARNING” found throughout this manual:
7!2.).'
!44%.4)/.
$!.'%2
)--%$)!4%!#4)/.2%15)2%$
#!54)/.
2
The following safety warnings are located on the Bowflex®SelectTech®5.1 Bench. Please read all safety
precautions and warning information prior to using your product. Be sure to replace any warning label if damaged,
illegible, or missing. If you need replacement labels, please call a Bowflex®Representative at 1-800-864-1270.
Safety Warning Labels
Label 1
Label 2
Label 1: “Warning!: Use only genuine Bowflex®replacement parts. Failure to do so will void warranty and could
result in personal injury. There is a risk assumed by individuals who use this type of equipment. To
minimize the risk always read your owner’s manual and follow these simple rules:
• Do not exceed max user weight - 300 lbs. (136.3 kg)
• Do not exceed maximum allowed lifting load 300 lbs. (136.3 kg)
• This machine is not intended for institutional use.
• Inspect equipment before each use. Replace all parts at the first signs of wear or damage. If in doubt
about a certain part, DO not use the equipment until the part is replaced. Failure to replace worn or
damaged parts may result in injury.
CONSULT YOUR PHYSICIAN BEFORE STARTING ANY EXERCISE PROGRAM. Warm up properly before
engaging in weight resistance training. Stop exercising if you feel faint or dizzy.
TO PREVENT THE POSSIBILITY OF SERIOUS INJURY, KEEP BODY AND CLOTHING CLEAR OF ALL
MOVING PARTS.
CHILDREN SHOULD NOT BE ALLOWED TO USE THIS EQUIPMENT. To avoid possible injury children
should be kept at a safe distance when this equipment is in use. Teenagers should not use this
equipment without adult supervision.
CALL YOUR AUTHORIZED BOWFLEX DEALER if you have any questions on the proper use or
maintenance of this equipment or BOWFLEX®CUSTOMER SERVICE AT: 1-800-605-3369 or
www.bowflex.com
DO NOT REMOVE”
Location: On the rear Bench Frame.
Label 2: “Warning!: Keep hands clear of this area.”
Location: On the front Bench Frame.
3
Hardware and Tool Guide
Tools Required:
• 9/16 Socket
• 9/16 Wrench or Adjustable wrench
• 7/32 Allen Wrench (provided)
• 3/16 Allen Wrench (provided)
Before You Assemble
Before You Assemble
Please take the time to read all assembly instructions before
attempting to assemble your Bowflex®SelectTech®5.1 Bench.
The best place for your Bowflex®SelectTech®5.1 Bench is on a
hard, level surface.
Basic Assembly Principles
Here are a few basic tips that will make your assembly of the
Bowflex®SelectTech®5.1 Bench quick and easy. By using these
principles, you can simplify each process and save yourself extra
time and effort.
1. To make the assembly process go faster, gather the pieces
you need for each step and thoroughly read the assembly
instructions for that step prior to starting assembly for the
step.
2. When tightening a locknut on a bolt, use a combination
wrench to grip the locknut and ensure that it is fastened
securely.
3. When attaching two pieces, gently lift and look through the
bolt holes to help guide the bolt through the holes.
4. As a general rule, and for all bolts and nuts on your Bowflex®
SelectTech®5.1 Bench, turn bolts or nuts toward the right to
tighten and left to loosen. Or you can remember the mnemonic:
“Righty tighty, lefty loosey.”
Descr: Allen Bolt - 3/8 x 3
Qty: 2
Descr: Flat Washer 5/16”
Qty: 10
Descr: Lock Nut 3/8”
Qty: 2
Descr: Flat Washer 3/8”
Qty: 7
Descr: Allen Bolt - 5/16 x 2.5
Qty: 10
Descr: Allen Bolt - 3/8 x1
Qty: 3
Descr: End Cap 3/4”
Qty: 2
Hardware:
NOTE: Illustrations not to scale.
4
Parts Guide
Item #: Qty: Description:
1 1 FRAME ASSY
2 1 STABILIZER, REAR
3 1 STABILIZER, FRONT
4 1 LEG HLD DOWN ASSY
5 1 TUBE, FOAM ROLLER
6 2 PAD, FOAM ROLLER
7 2 CAP, END 3/4”
8 1 SEAT, BOTTOM
9 1 PAD, BACK
Item #: Qty: Description:
10 1 PAD, HEAD
11 10 BHCS 0.3125-18 X 2.5 X.75 BLK
12 3 BHCS 0.375-16 X 1X1 BLK
13 2 BHCS 0.375-16 X 3X1 BLK
14 10 Flat Washer 5/16”
15 7 Flat Washer 3/8”
16 2 NUT, NYLOCK 3/8”
2
3
4
56
10
1
98
15
12
14
11
16
15
13
7
5
Assembly Instructions
STEP 1: Attaching Front and Rear Stabilizers
Parts:
• (1) Bench Frame - Item 1
• (1) Rear Stabilizer - Item 2
• (1) Front Stabilizer - Item 3
Hardware:
• (2) 3/8 inch Allen Bolt, 3 inch long - Item 13
• (3) 3/8 inch Allen Bolt, 1 inch long - Item 12
• (7) Flat Washer 3/8 inch - Item 15
• (2) Lock Nut 3/8 inch - Item 16
Tools:
• 7/32 Allen Wrench
• 9/16 Wrench
Assembly Steps:
1-1 Attach the Front Stabilizer (2) to the Bench Frame
(1) using the hardware shown.
1-2 Tighten hardware.
1-3 Attach the Rear Stabilizer (3) to the Bench Frame
(1) using the hardware shown.
1-4 Tighten hardware.
2
3
1
12
15
16
15
13
6
STEP 2: Attaching Seat Pad to Main Frame
Parts:
• (1) Bench Frame Assembly from Step 1
• (1) Seat Pad Assembly - Item 8
Hardware:
• (4) 5/16 inch Allen Bolt, 2 1/2 inch long - Item 11
• (4) Flat Washer 5/16 inch - Item 14
Tools:
• 3/16 Allen Wrench
Assembly Steps:
2-1 Align the Seat Pad Assembly (1) to the Bench
Frame Assembly between the open holes as
shown.
2-2 Secure with the hardware as shown.
8
14
11
7
STEP 3: Attaching Back Assembly to Main Frame
Parts:
• (1) Bench Frame Assembly from Step 2
• (1) Back Pad Assembly - Item 9
• (1) Head Pad Assembly - Item 10
Hardware:
• (6) 5/16 inch Allen Bolt, 2 1/2 inch long - Item 11
• (6) Flat Washer 5/16 inch - Item 14
Tools:
• 3/16 Allen Wrench
Assembly Steps:
3-1 Align the Back Pad Assembly (9) to the Bench
Frame Assembly between the open holes as
shown.
3-2 Secure with the hardware as shown.
3-3 Align the Head Pad Assembly (10) to the Bench
Frame Assembly between the open holes as
shown.
3-4 Secure with the hardware as shown.
10
9
11
14
Autres manuels pour SelectTech 5.1
1
Table des matières
Autres manuels Bowflex Salle de sport à domicile
Bowflex
Bowflex Xceed Manuel utilisateur
Bowflex
Bowflex Revolution Manuel utilisateur
Bowflex
Bowflex SelectTech 552i Manuel utilisateur
Bowflex
Bowflex Xceed Plus Manuel utilisateur
Bowflex
Bowflex BOWFLEX XTREME.SE Manuel utilisateur
Bowflex
Bowflex ULTIMATE Manuel utilisateur
Bowflex
Bowflex Revolution Manuel utilisateur
Bowflex
Bowflex HOME GYM Manuel utilisateur
Bowflex
Bowflex Revolution Manuel utilisateur
Bowflex
Bowflex Sport 001-6961 Manuel utilisateur
Bowflex
Bowflex ULTIMATE 2 Manuel utilisateur
Bowflex
Bowflex ElitePlus Manuel utilisateur
Bowflex
Bowflex SelectTech BD55i Manuel utilisateur
Bowflex
Bowflex The BOWFLEX Xtreme2 Manuel utilisateur
Bowflex
Bowflex Revolution FT Manuel utilisateur
Bowflex
Bowflex SelectTech 3.1 Bench Instructions d'installation et d'utilisation
Bowflex
Bowflex SelectTech 4.1 Manuel utilisateur
Bowflex
Bowflex Motivator 2 Manuel utilisateur
Bowflex
Bowflex Xtreme SE Manuel utilisateur
Bowflex
Bowflex Revolution FT Manuel utilisateur
Manuels Salle de sport à domicile populaires d'autres marques
Horizon Fitness
Horizon Fitness OXFORD 6 Manuel utilisateur
Energetics
Energetics Multi Trainer 5.1 Manuel utilisateur
Matrix
Matrix MG-PL Series Manuel utilisateur
Reebok
Reebok Tbr2i Manuel d'utilisation et d'entretien
Weider
Weider 8300 Hard Drive Manuel utilisateur
Pure Fitness
Pure Fitness 8526HE Manuel utilisateur
