Bosch MIC IP starlight 7000i Manuel utilisateur
MIC IP starlight 7000i
MIC-7502-Z30B│MIC-7502-Z30W│MIC-7502-Z30G
en User Manual
MIC IP starlight 7000i Table of contents | en 3
Bosch Security Systems User Manual 2017.11 | 1.2 |
Table of contents
1Browser connection 5
1.1 Systems requirements 5
1.2 Establishing the connection 5
1.3 Password protection in camera 5
2System overview 7
2.1 Live page 7
2.2 Configuration 7
2.3 Playback 7
3Operation via the browser 8
3.1 Live page 8
3.1.1 Connection 8
3.1.2 PTZ 8
3.1.3 Pre-positions 8
3.1.4 AUX Control 9
3.1.5 Intelligent Tracking 9
3.1.6 Special Functions 9
3.1.7 Recording status 10
3.1.8 Saving snapshots 10
3.1.9 Recording live video 10
3.1.10 Full-screen display 10
3.1.11 Video Security App 10
3.1.12 Date and Time 10
3.1.13 Audio communication 10
3.1.14 Storage, CPU and network status 11
3.1.15 Status icons 11
3.2 Playback via browser 12
3.2.1 Selecting the recording stream 12
3.2.2 Searching for recorded video 12
3.2.3 Exporting recorded video 12
3.2.4 Controlling playback 12
4General 14
4.1 Identification 14
4.2 User Management 14
4.3 Date/Time 15
4.4 Display Stamping 16
4.5 GB/T 28181 18
5Web Interface 20
5.1 Appearance 20
5.2 LIVE Functions 21
6Camera 23
6.1 Installer Menu 23
6.1.1 Positioning 23
6.2 Encoder Profile 26
6.3 Encoder Streams 29
6.4 Privacy Masks 31
6.5 Picture Settings 32
6.6 Lens Settings 35
6.7 PTZ Settings 36
4en | Table of contents MIC IP starlight 7000i
2017.11 | 1.2 | User Manual Bosch Security Systems
6.8 Scene Mode Scheduler 38
6.9 Pre-positions and Tours 38
6.10 Pre-position mapping 39
6.11 Sectors 39
6.12 Miscellaneous 39
6.13 Illumination/Wiper 39
6.14 Audio 41
6.15 Pixel Counter 41
7Alarm 42
7.1 Alarm Connections 42
7.2 Video Content Analysis (VCA) 44
7.3 Virtual Masks 45
7.4 Audio Alarm 46
7.5 Alarm E-Mail 46
7.6 Alarm Task Editor 47
7.7 Alarm Rules 48
8Interfaces 49
8.1 COM1 49
9Network 50
9.1 Network Services 50
9.2 DynDNS 50
9.3 Advanced 51
9.4 Network Management 52
9.5 Multicast 52
9.6 Image Posting 53
9.7 Accounts 54
9.8 IPv4 Filter 55
9.9 Encryption 55
10 Service 56
10.1 Maintenance 56
10.2 Licenses 56
10.3 Certificates 56
10.4 Logging 57
10.5 Diagnostics 57
10.6 System Overview 57
11 Using your MIC Camera 58
11.1 Recommended Use of Your MIC Camera 58
11.2 Using Intelligent Tracking 59
11.3 Uploading a User Logo 62
11.4 Azimuth, Elevation, and Compass Directions 63
11.5 Using the Wiper/Washer (Bosch Protocol) 64
11.6 Using the Wiper/Washer (Pelco Protocol) 65
11.7 Configuring Settings for IR Illumination 66
12 Troubleshooting 67
13 Status Codes 71
14 AUX Commands 76
MIC IP starlight 7000i Browser connection | en 5
Bosch Security Systems User Manual 2017.11 | 1.2 |
1 Browser connection
A computer with Microsoft Internet Explorer is used to receive live images, control the unit,
and replay stored sequences. The unit is configured over the network using the browser.
1.1 Systems requirements
Our recommendations are:
– Computer with Intel Skylake processor or better
– Intel HD530 graphic card with performance that matches or is better than the resolution
of the camera
– Windows7 or later operating system
– Network access
– Internet Explorer version 11 or later
– or –
Application software, for example, VideoSecurityClient, BoschVideoClient or Bosch
Video Management System.
Note:
To see live images in your browser it might be necessary to download and install the MPEG-
ActiveX from the Bosch download store.
1.2 Establishing the connection
The unit must have a valid IP address to operate on your network and a compatible subnet
mask.
By default, DHCP is pre-set at the factory to On plus Link-Local so a DHCP server assigns an
IP address or, if no DHCP server is available, a link-local address (auto-IP) is assigned within
the range 169.254.1.0 to 169.254.254.255.
You can use IP Helper or Configuration Manager to find the IP address. Download the software
from http://downloadstore.boschsecurity.com.
1. Start the Web browser.
2. Enter the IP address of the unit as the URL.
3. During initial installation, confirm any security questions that appear.
If a RADIUS server is used for network access control (802.1x authentication), you must
configure the device before the device can communicate with the network.
To configure the device, connect it directly to a computer using a network cable and then set
the service-level password.
Note:
If you cannot connect, the unit may have reached its maximum number of connections.
Depending on the device and network configuration, each unit can have up to 50 web browser
connections, or up to 100 connections via BoschVideoClient or Bosch Video Management
System.
1.3 Password protection in camera
The device is password-protected. The first time that any user accesses the device, the device
will prompt the user to set a password at the service level.
The camera requires a strong password. Follow the prompts in the dialog box, which specifies
what is required. The system measures the strength of the password that you enter.
6en | Browser connection MIC IP starlight 7000i
2017.11 | 1.2 | User Manual Bosch Security Systems
When you use Configuration Manager to access your device for the first time, you must set the
initial password of the device in Configuration Manager. The Users section (General > Unit
Access > Users) displays the message, "Before you can use this device you have to secure it
with an initial password."
Note: After you set the initial password, a "lock" icon appears next to the device name in the
Devices list in Configuration Manager.
You can also launch the device webpage directly. In the device webpage, an initial password
page appears, displaying input fields and a password strength gauge.
Enter the user name (“service”) and a password in the appropriate fields. Refer to the section
User Management for more information.
After a service-level password is set for the device, the device displays a dialog box that
prompts users to enter the user name (“service”) and the service-level password every time
that they access the device.
1. Fill in the fields User name and Password.
2. Click OK. If the password is correct, the desired page appears.
MIC IP starlight 7000i System overview | en 7
Bosch Security Systems User Manual 2017.11 | 1.2 |
2 System overview
When a connection is established, the Live page is initially displayed.
The application bar displays the following icons:
Live To view the live video stream, click this icon.
Playback To play back recorded sequences, click this icon.
This link is only visible if a storage medium has been
configured for recording. (With VRM recording this
option is not active.)
Configuration To configure the unit, click this icon.
Links To navigate to the Bosch download store, click this
icon.
To get context sensitive help for a particular page, click
this icon.
Note: None of the pages are accessible until after you set a service-level password.
2.1 Live page
The Live page is used to display the live video stream and control the unit.
2.2 Configuration
The Configuration page is used to configure the unit and the application interface.
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering
new values or by selecting a predefined value from a list field.
Not every page has a Set button. Changes to pages without a Set button are set immediately.
If a page does show a Set button, you must click the Set button for a change to take effect.
Notice!
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the current field. Changes in any other fields
are ignored.
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1. Make the desired changes.
2. Click the Set and Reboot button. The camera reboots and the changed settings are
activated.
All settings are backed up in camera memory so they are not lost even if the power fails. The
exception is the time settings, which are lost after 1 hour without power if no central time
server is selected.
2.3 Playback
The Playback page is used for playing back recorded sequences.
8en | Operation via the browser MIC IP starlight 7000i
2017.11 | 1.2 | User Manual Bosch Security Systems
3 Operation via the browser
3.1 Live page
3.1.1 Connection
Stream 1
Select this option to display stream 1 of the camera.
Stream 2
Select this option to display stream 2 of the camera.
M-JPEG
Select this option to display the M-JPEG stream of the camera.
3.1.2 PTZ
Pan and tilt controls
– To tilt the camera up: Click and hold the up arrow.
– To tilt the camera down: Click and hold the down arrow.
– To pan the camera left: Click and hold the left arrow.
– To pan the camera right: Click and hold the right arrow.
– To pan and tilt the camera at the same time (variable pan/tilt): Click and drag the center
area (that resembles a point stick or a trackball on a computer keyboard) around the PTZ
control in the direction that you want to move the camera.
Notice!
If the camera will not pan in either direction, or pans in one direction only, refer to the “Error
Codes” section of the manual.
Zoom
Click the + button to zoom in.
Click the - button to zoom out.
Iris
Click (Iris close) to close the iris.
Click (Iris open) to open the iris.
Focus
Click to focus near.
Click to focus far.
3.1.3 Pre-positions
The camera displays Pre-position 1 through Pre-position 6. Select the appropriate pre-
position to view the video image for that pre-position/scene. In the lower left of the video
image, the OSD displays the Camera number (title), the Pre-position number, and the Pre-
position number stored.
Below the list of pre-positions/scenes is a drop-down list showing the stored pre-positions/
scenes.
Select the appropriate pre-position (1 through 6). Click to store the pre-position.
MIC IP starlight 7000i Operation via the browser | en 9
Bosch Security Systems User Manual 2017.11 | 1.2 |
Note: If the pre-position is already stored, a dialog box displays the message, “Overwrite
current pre-position?” Click OK to overwrite, or click Cancel to cancel the operation.
Click to display the selected pre-position in the video image.
3.1.4 AUX Control
With the tab AUX Control you can enter pre-programmed keyboard control commands. These
commands are composed of a command number plus the appropriate function key (Show pre-
position, Set pre-position, AUX on, or AUX off). A valid combination either issues a command
to the device or displays an on-screen menu.
(Refer to the “Keyboard Commands“ section of the manual for a list of all AUX commands for
your camera.)
Show pre-position
Click this button to display a pre-position.
Set pre-position
Click this button to set a pre-position.
AUX on
Click this button to activate an AUX command.
AUX off
Click this button to deactivate an AUX command.
3.1.5 Intelligent Tracking
Options for tracking objects within the region of interest appear in the panel.
When Intelligent Tracking is active, the tracking icon appears on the image along with
the lines that track moving objects.
Select Off, Auto or Click. If Click is selected, click on an object to track it.
3.1.6 Special Functions
Scan 360°
Click this button to start a continuous 360° pan. To stop the continuous pan, click a
directional control in the View Control tab.
Autopan
Click this button to pan the camera between user-defined limits.
Tour A / Tour B
Click one of these buttons to start the continuous playback of a recorded (guard) tour. A
recorded tour saves all manual camera movements made during the recording, including its
rate of pan, tilt and zoom speeds, and other lens setting changes.
To stop a tour, click a directional control in the View Control tab.
Focus
Click this button to activate the Auto Focus One Push mode on the camera.
The OSD displays the message, “Auto Focus: ONE PUSH.”
White light
Click this button to turn on the White light of the illuminator accessory (if available on your
camera).
Click this button again to turn off the White light.
10 en | Operation via the browser MIC IP starlight 7000i
2017.11 | 1.2 | User Manual Bosch Security Systems
Custom tour
Click this button to view (in continuous playback) a custom tour that was previously
configured.
3.1.7 Recording status
The hard drive icon below the live camera image changes during an automatic recording.
The icon lights up and displays a moving graphic to indicate a running recording. If no
recording is taking place, a static icon is displayed.
3.1.8 Saving snapshots
Individual images from the displayed live video stream can be saved locally in JPEG format on
the computer's hard drive. The storage location depends on the configuration of the camera.
– Click the photo camera icon to save a single image.
3.1.9 Recording live video
Video sequences from the displayed live video stream can be saved locally on the computer's
hard drive. The sequences are recorded at the resolution specified in the encoder
configuration. The storage location depends on the configuration of the camera.
1. Click the recording icon to record video sequences.
– Saving begins immediately. The red dot on the icon indicates that a recording is in
progress.
2. Click the recording icon again to stop recording.
3.1.10 Full-screen display
Click the full-screen icon to view the selected stream in full-screen mode; press Esc
on the keyboard to return to the normal viewing window.
3.1.11 Video Security App
Start Video Security app
To start the Video Security app, click .
3.1.12 Date and Time
Date/Time (unlabeled)
The unlabeled date and time ticker appears above the row of icons (including
) that is below the lower-left corner of the live video image.
3.1.13 Audio communication
Audio can be sent and received via the Live page if the unit and the computer support audio.
1. Press and hold the F12 key on the keyboard to send an audio signal to the unit.
2. Release the key to stop sending audio.
Autres manuels pour MIC IP starlight 7000i
4
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Bosch Système de sécurité
Bosch
Bosch SE 320 LSNi Manuel utilisateur
Bosch
Bosch Plena PLE-1CS Guide de référence
Bosch
Bosch CC880/LP880, SC8016 Manuel
Bosch
Bosch Spexor Manuel utilisateur
Bosch
Bosch PRAESENSA Manuel utilisateur
Bosch
Bosch FMC-210-DM-G-B Manuel utilisateur
Bosch
Bosch UNPXF Series Manuel utilisateur
Bosch
Bosch B Series Manuel utilisateur
Bosch
Bosch Fire System Manuel utilisateur
Bosch
Bosch SE3000 Series Manuel du produit
Bosch
Bosch FMC-210-SM Manuel utilisateur
Bosch
Bosch Plena LBB 1965 Manuel utilisateur
Bosch
Bosch DS7400Xi Manuel utilisateur
Bosch
Bosch Spexor Manuel utilisateur
Bosch
Bosch MIC-9502 Manuel utilisateur
Bosch
Bosch Security Systems Manuel utilisateur
Bosch
Bosch DIVAR DIP-6080-00N Manuel utilisateur
Bosch
Bosch Security Escort SE2000 Series Guide d'installation
Bosch
Bosch ISW-BMC1-M82X Manuel utilisateur
Bosch
Bosch DIP-2040-00N Manuel utilisateur
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur