Bosch NDP-5512-Z30C Manuel utilisateur

AUTODOME IP starlight 5000i

NDP‑5512‑Z30 │ NDP‑5512‑Z30C

en User Manual

AUTODOME IP starlight 5000i Table of contents | en 3

Bosch Security Systems User Manual 2019-11 | 1.2 |

Table of contents

1Introduction 6

1.1 Systems requirements 6

1.2 Establishing the connection 6

1.3 Password protection in camera 7

2System overview 8

2.1 Live page 8

2.2 Configuration 8

2.3 Playback 8

2.4 Dashboard 9

3Operation via the browser 10

3.1 Live page 10

3.1.1 Connection 10

3.1.2 PTZ 10

3.1.3 Pre-positions 10

3.1.4 AUX Control 11

3.1.5 Digital I/O 11

3.1.6 Special Functions 11

3.1.7 Recording status 12

3.1.8 Saving snapshots 12

3.1.9 Recording live video 12

3.1.10 Full-screen display 12

3.1.11 Audio communication 12

3.1.12 Storage, CPU and network status 12

3.1.13 Status icons 13

3.2 Playback via browser 13

3.2.1 Selecting the recording stream 14

3.2.2 Searching for recorded video 14

3.2.3 Exporting recorded video 14

3.2.4 Controlling playback 14

4General 15

4.1 Identification 15

4.2 User Management 15

4.3 Date/Time 16

4.4 Display Stamping 17

4.5 GB/T 28181 19

5Web Interface 21

5.1 Appearance 21

5.2 LIVE Functions 22

6Camera 23

6.1 Installer Menu 23

6.2 Scene Mode 23

6.2.1 Picture Settings 24

6.2.2 Enhance 25

6.2.3 Scene Mode Scheduler 26

6.3 Color 26

6.4 ALC 28

6.5 Enhance 29

6.6 Scene Mode Scheduler 29

4en | Table of contents AUTODOME IP starlight 5000i

2019-11 | 1.2 | User Manual Bosch Security Systems

6.7 Encoder Profile 29

6.8 Encoder Streams 32

6.9 Encoder Regions 32

6.10 Encoder Statistics 33

6.11 Privacy Masks 33

6.12 Picture Settings 34

6.13 Lens Settings 36

6.14 PTZ Settings 36

6.15 Pre-positions and Tours 37

6.16 Pre-position mapping 38

6.17 Sectors 39

6.18 Miscellaneous 39

6.19 Audio 39

6.20 Pixel Counter 40

7Recording 41

7.1 Introduction to recording 41

7.2 Storage Management 41

7.2.1 Device manager 41

7.2.2 Recording media 41

7.2.3 Activating and configuring storage media 42

7.2.4 Formatting storage media 42

7.2.5 Deactivating storage media 42

7.3 Recording Profiles 42

7.4 Maximum Retention Time 44

7.5 Recording Scheduler 44

7.6 Recording Status 45

7.7 Recording Statistics 45

7.8 Image Posting 45

7.9 SD Card Status 46

8Alarm 47

8.1 Alarm Connections 47

8.2 Video Content Analysis (VCA) 49

8.3 Audio Alarm 51

8.4 Alarm E-Mail 51

8.5 Alarm Task Editor 52

8.6 Alarm Rules 53

9Network 54

9.1 Network Services 54

9.2 Network Access 54

9.3 DynDNS 56

9.4 Advanced 57

9.5 Network Management 58

9.6 Multicast 59

9.7 Image Posting 60

9.8 Accounts 61

9.9 IPv4 Filter 61

9.10 Encryption 61

10 Service 62

10.1 Maintenance 62

AUTODOME IP starlight 5000i Table of contents | en 5

Bosch Security Systems User Manual 2019-11 | 1.2 |

10.2 Licenses 62

10.3 Certificates 63

10.4 Logging 63

10.5 Diagnostics 63

10.6 System Overview 63

11 AUX Commands 64

12 Troubleshooting 65

12.1 Rebooting the unit 66

12.2 Physical reset button 67

12.3 Customer Service and Support 68

6en | Introduction AUTODOME IP starlight 5000i

2019-11 | 1.2 | User Manual Bosch Security Systems

1 Introduction

1.1 Systems requirements

– Computer with Intel Skylake processor or better

– Intel HD530 graphic card with performance that matches or is better than the resolution

of the camera

– Windows7 (or newer) operating system

– Network access

– Web browser:

– Internet Explorer version 11 (or newer)

Mozilla Firefox

– Application software, for example, VideoSecurityClient, BoschVideoClient, BVMS, or

Project Assistant app.

– DirectX 11

– MPEG-ActiveX 6.33 (or newer) [required to see, in your browser, live images from the

camera]

– Configuration Manager 6.20 (or newer)

1.2 Establishing the connection

The unit must have a valid IP address to operate on your network and a compatible subnet

mask.

By default, DHCP is pre-set at the factory to On plus Link-Local so a DHCP server assigns an

IP address or, if no DHCP server is available, a link-local address (auto-IP) is assigned within

the range 169.254.1.0 to 169.254.254.255.

You can use IP Helper or Configuration Manager to find the IP address. Download the software

from http://downloadstore.boschsecurity.com.

1. Start the Web browser.

2. Enter the IP address of the unit as the URL.

3. During initial installation, confirm any security questions that appear.

If a RADIUS server is used for network access control (802.1x authentication), you must

configure the device before the device can communicate with the network.

To configure the device, connect it directly to a computer using a network cable and then set

the service-level password.

Note:

If you cannot connect, the unit may have reached its maximum number of connections.

Depending on the device and network configuration, each unit can have up to 50 web browser

connections, or up to 100 connections via BoschVideoClient or Bosch Video Management

System.

AUTODOME IP starlight 5000i Introduction | en 7

Bosch Security Systems User Manual 2019-11 | 1.2 |

1.3 Password protection in camera

The device is password-protected. The first time that any user accesses the device, the device

will prompt the user to set a password at the service level.

The camera requires a strong password. Follow the prompts in the dialog box, which specifies

what is required. The system measures the strength of the password that you enter.

When you use Configuration Manager to access your device for the first time, you must set the

initial password of the device in Configuration Manager. The Users section (General > Unit

Access > Users) displays the message, "Before you can use this device you have to secure it

with an initial password."

Note: After you set the initial password, a "lock" icon appears next to the device name in the

Devices list in Configuration Manager.

You can also launch the device webpage directly. In the device webpage, an initial password

page appears, displaying input fields and a password strength gauge.

Enter the user name (“service”) and a password in the appropriate fields. Refer to the section

User Management for more information.

After a service-level password is set for the device, the device displays a dialog box that

prompts users to enter the user name (“service”) and the service-level password every time

that they access the device.

1. Fill in the fields User name and Password.

2. Click OK. If the password is correct, the desired page appears.

8en | System overview AUTODOME IP starlight 5000i

2019-11 | 1.2 | User Manual Bosch Security Systems

2 System overview

When a connection is established, the Live page is initially displayed.

The application bar displays the following icons:

Live Click this icon to view the live video stream.

Playback Click this icon to play back recorded sequences.

This link is only visible if a storage medium has been

configured for recording. (With VRM recording, this

option is not active.)

Configuration Click this icon to configure the device.

Dashboard Click this icon to see detailed system information.

Links Click this icon to navigate to the Bosch download store.

Click this icon to get context-sensitive help for the page

you are browsing.

2.1 Live page

The Live page is used to display the live video stream and control the unit.

2.2 Configuration

The Configuration page is used to configure the unit and the application interface.

Making Changes

Each configuration screen shows the current settings. You can change the settings by entering

new values or by selecting a predefined value from a list field.

Not every page has a Set button. Changes to pages without a Set button are set immediately.

If a page does show a Set button, you must click the Set button for a change to take effect.

Notice!

Save each change with the associated Set button.

Clicking the Set button saves the settings only in the current field. Changes in any other fields

are ignored.

Some changes only take effect after the unit is rebooted. In this case, the Set button changes

to Set and Reboot.

1. Make the desired changes.

2. Click the Set and Reboot button. The camera reboots and the changed settings are

activated.

All settings are backed up in camera memory so they are not lost even if the power fails. The

exception is the time settings, which are lost after 1 hour without power if no central time

server is selected.

2.3 Playback

The Playback page is used for playing back recorded sequences.

AUTODOME IP starlight 5000i System overview | en 9

Bosch Security Systems User Manual 2019-11 | 1.2 |

2.4 Dashboard

The Dashboard page is used to display detailed information about the device.

The Dashboard is only visible in the application bar if the Show 'Dashboard' option is enabled

by a service-level user in the Configuration -> Web Interface -> Appearance page.

10 en | Operation via the browser AUTODOME IP starlight 5000i

2019-11 | 1.2 | User Manual Bosch Security Systems

3 Operation via the browser

3.1 Live page

3.1.1 Connection

Stream 1

Select this option to display stream 1 of the camera.

Stream 2

Select this option to display stream 2 of the camera.

M-JPEG

Select this option to display the M-JPEG stream of the camera.

3.1.2 PTZ

Pan and tilt controls

– To tilt the camera up: Click and hold the up arrow.

– To tilt the camera down: Click and hold the down arrow.

– To pan the camera left: Click and hold the left arrow.

– To pan the camera right: Click and hold the right arrow.

– To pan and tilt the camera at the same time (variable pan/tilt): Click and drag the center

area (that resembles a point stick or a trackball on a computer keyboard) around the PTZ

control in the direction that you want to move the camera.

Zoom

Click the + button to zoom in.

Click the - button to zoom out.

Iris

Click (Iris close) to close the iris.

Click (Iris open) to open the iris.

Focus

Click to focus near.

Click to focus far.

3.1.3 Pre-positions

The camera displays Pre-position 1 through Pre-position 6. Select the appropriate pre-

position to view the video image for that pre-position/scene. In the lower left of the video

image, the OSD displays the Camera number (title), the Pre-position number, and the Pre-

position number stored.

Below the list of pre-positions/scenes is a drop-down list showing the stored pre-positions/

scenes.

Select the appropriate pre-position (1 through 6). Click to store the pre-position.

Note: If the pre-position is already stored, a dialog box displays the message, “Overwrite

current pre-position?” Click OK to overwrite, or click Cancel to cancel the operation.

Click to display the selected pre-position in the video image.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bosch Caméra de sécurité

Bosch

Bosch LTC 0465 Series Manuel utilisateur

Bosch

Bosch G3A Series Manuel utilisateur

Bosch

Bosch LTC-0498-21 Manuel utilisateur

Bosch

Bosch AUTODOME 7000 HD Manuel

Bosch

Bosch REG-L1 Manuel utilisateur

Bosch

Bosch VEZ-400 Series Manuel utilisateur

Bosch

Bosch VJR-A3-IC Manuel utilisateur

Bosch

Bosch Dinion XF LTC 0495/11 Manuel utilisateur

Bosch

Bosch DINION 4000 AN Manuel utilisateur

Bosch

Bosch Autodome 7000 IP Manuel utilisateur

Bosch

Bosch FLEXIDOME AN micro 1000 Manuel utilisateur

Bosch

Bosch LTC 0630 Series Manuel utilisateur

Bosch

Bosch NWD-455 FlexiDome Manuel utilisateur

Bosch

Bosch FlexiDomeXF VDC-485V03-20 Manuel utilisateur

Bosch

Bosch REG-D1-875XE-01 Manuel utilisateur

Bosch

Bosch FlexiDomeXF VDC-485V03-10 Manuel utilisateur

Bosch

Bosch EX14 Series Manuel utilisateur

Bosch

Bosch MIC400 PTZ Manuel utilisateur

Bosch

Bosch MIC IP dynamic 7000 HD Manuel utilisateur

Bosch

Bosch FLEXIDOME NIN-63013 Manuel utilisateur

Bosch

Bosch VG4 Series Manuel utilisateur

Bosch

Bosch Dinion LTC0335/20 Manuel utilisateur

Bosch

Bosch FLEXIDOME IP micro 5000 Manuel utilisateur

Bosch

Bosch NBN-80122 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur