Boly MG983G-36M Manuel utilisateur
Infrared Mobile Digital Scouting Camera
User Manual
MG983G-36M
Content
1 Instruction......................................................................................1
1.1 General Description..................................................................1
1.2 Application.................................................................................1
1.3 Camera Overview......................................................................2
1.4 Shooting Information Display................................................3
1.5 Two Way Communication.......................................................4
2 Cautions.......................................................................................... 5
3 Quick Start Guide....................................................................... 6
3.1 Power Supply.............................................................................6
3.2 Insert SD card and SIM card..................................................6
3.3 Changing Camera Settings..................................................... 6
3.4 Manually Send a MMS or GPRS Photo................................9
3.5 SMS Control............................................................................ 10
3.6 Password Set........................................................................... 10
4 Advanced Operations..............................................................11
4.1 Work Mode.......................................................................... 11
4.2 Settings Menu.................................................................... 11
4.2.1 Setting Items........................................................... 12
4.2.2 Default Set............................................................... 17
4.3 Use the Remote Control................................................ 18
4.4 Load or Remove a Wireless Sensor......................... 19
4.5 Change the Settings via Android APP or SMS.....22
4.6 User Level............................................................................22
4.7 Use Android APP.............................................................. 23
4.8 SMS Command List.........................................................23
Appendix I: PIR Detection Zone............................................26
Appendix II: Error Code............................................................28
Appendix Ⅲ: Technical Specifications...............................30
Appendix Ⅳ: Parts List............................................................. 31
MG983G-36M 1 Instruction
Page 1
1 Instruction
1.1 General Description
This digital infrared surveillance camera has 3G
communication functionality, and has a high sensitive
Passive Infrared (PIR) motion sensor which can be
triggered by any human or animal movement. This
camera captures high quality pictures of up to 36M
pixels and records video clips at 1080 FHD. It sends
pictures instantly to your mobile device, or video (less
than 10M) to your e-mail via GPRS network. You’ll be
alerted when the camera is triggered or per custom
settings.
The camera takes color pictures and videos with
sufficient daylight, and uses built-in infrared LEDs to
help to take clear pictures or videos in the night.
There is a 2.3" color LCD display screen on the camera
and a sound recorder embedded in the camera. A laser
pointer is used to help target the photo area of the
camera.
The camera is resistant against water and snow, and can
also be used as a portable digital camera.
1.2 Application
This camera can be used as an automatic surveillance
device for guarding and recording unexpected intrusion
to homes, shops, schools, work sites, etc. It can also be
used as a trail camera for hunting or monitoring animals
by recording the traces of wild animals. This camera can
be left alone for weeks or months and will save records
automatically in digital format.
MG983G-36M 1 Instruction
Page 2
1.3 Camera Overview
Take a few moments to familiarize with the camera
controls and displays. It is helpful to bookmark this
section and refer to it when reading through the rest of
the manual.
Figure 1 Diagram of camera functional indicators
MG983G-36M 1 Instruction
Page 3
Figure 2 Inner panel view
Figure 3 Diagram of camera interfaces
1.4 Shooting Information Display
When the camera is turned on (the power switch is slid
to SETUP position), the current settings will be
MG983G-36M 1 Instruction
Page 4
displayed on screen.
Figure 4 Shooting information display
is the correct SIM card status and the available space
of SD card should be a zero value.
1.5 Two Way Communication
You can set SMS control submenu as ON to open the
two-way communication function. Under this setting,
the camera can receive and respond to your SMS
command or the Android APP command.
This camera can send pictures instantly to your mobile
device via WCDMA/GSM (GSM not work in USA and
Canada) network. You’ll be alerted just when a picture or
video has been taken. The camera sends MMS or Email
message through MMSC (MMS Service Center) or GPRS
network, so before using this function, be sure to open
MMS and GPRS service from your service provider. It
supports the following bands ：GSM with 850MHz,
900MHz, 1800MHz and 1900MHz ；WCDMA with
850MHz, 900MHz, 1900MHz and 2100MHz.
36M
MG983G-36M 2 Cautions
Page 5
2 Cautions
The working voltage of the camera is 6V. The camera is
supplied by the power adapter or 8 AA batteries.
Please install batteries according to shown polarity.
Please insert the SD card before powering on the camera.
The camera has no internal memory for saving images or
videos. The camera will not work if there is no SD card.
Please unlock the write-protect switch before inserting the
SD card.
Please do not insert or take out the SD card when the power
switch is in the ON position.
Please make sure that your SIM card supports the MMS and
GPRS data
When going into the SETUP mode, allow approximately
10-20 seconds for the camera to acquire a signal.
It is recommended that you format the SD card with the
camera when used for the first time. Many other SD cards
formatted by other cameras have poor compatibility with
different brands of cameras, so it is best to format the SD
card with this camera or on a computer.
In the SETUP mode, the camera will shut down
automatically after 3 minutes if no operation is done. Please
turn on the power again if you want to continue to work with
the control.
MG983G-36M 4 Advanced Operations
Page 6
3 Quick Start Guide
3.1 Power Supply
Use 8 AA batteries (1.5V). High-density and
high-performance alkaline or lithium batteries are
recommended.
6V external power supply and solar panel are also
supported. The battery can be used as backup for
emergency use (6V support).
3.2 Insert SD card and SIM card
Insert an unlocked SD card and an available MMS and
GPRS enabled SIM card.
3.3 Changing Camera Settings
Download the camera set-up software (BMC-config) from
our website. The specified website is written in the last
page of the manual.
1) Open the software and select camera model:
MG983G-36M 4 Advanced Operations
Page 7
2) Set the camera parameters
First, select your country and carrier (Step 1) according to
your SIM card. Input your receiving phone number in
“Admin number” and receiving e-mail address in“Receive
Email 1”(Step 3). For first time users, we suggest you to
use default settings (Step 2). Click“Change Setting”to make
adjustments to settings.
3) WAP/Internet settings
MG983G-36M 4 Advanced Operations
Page 8
After inputting above settings, click “Check WAP/Internet
Parameters” to check whether you have filled all
parameters .
Then save the GSM folder to the root directory of your SD
card (Step 4).
If your country or SIM card operator is not on the list,
choose “Others”, then ask your SIM card operator for the
Table des matières
Autres manuels Boly Appareil photo numérique
