Boly BG310 Series Manuel utilisateur
Boly Trail Camera BG310 Series
Infrared Digital Scouting Camera
User Manual
BG310 Series
Boly Trail Camera BG310 Series
Table of Contents
1. Getting Started....................................................................................3
2. Camera Operations.......................................................................... 4
2.1 Batteries / Power Supply....................................................4
2.2 TF Card Information............................................................5
2.3 SIM Card Information.........................................................5
2.4 Camera Modes........................................................................6
2.5 Manage Images and/or Videos........................................ 7
2.6 Sending via MMS/GPRS/Molnus................................... 7
2.7 Password Setup...................................................................... 8
3. Camera Setup Settings & Display............................................. 9
3.1 Settings Interface & Display..............................................9
3.2 Wireless Model Setup....................................................... 10
3.2.1 Mobile Communication...................................... 10
3.2.2 Setup Software of PC........................................... 10
3.2.3 Setup for Mobile applications..........................12
3.3 Cloud Service - Molnus..................................................... 15
3.4 Camera Setup Options...................................................... 16
4. Troubleshooting..............................................................................20
5. PIR Detection Zone......................................................................... 21
6. Technical Specifications..............................................................22
7. Parts List............................................................................................. 23
WARRANTY CARD.................................................................... 24
Boly Trail Camera BG310 Series
3
1. Getting Started
BG310 series camera, this is a digital infrared surveillance camera.
Use 1.44" color LCD display and 2*18650 battery (pointed head,
length: 67~69mm), the USB port connects to the solar panel can
charge the 18650 battery.
You can choose different models according to different needs.
BG310 Non-wireless Camera
BG310-FP BG310 Full Package mode, BG310 with 2 * 18650 battery, 1 *
TF card and 1 * TF card adapter
BG310-M 4G Wireless Camera
BG310-MFP BG310-M Full Package mode, BG310-M with 2 * 18650
battery, 1 * TF card and 1 * TF card adapter
Boly Trail Camera BG310 Series
4
2. Camera Operations
2.1 Batteries / Power Supply
Battery
The camera is powered by 2*18650 batteries.
(pointed head,18650 battery, length: 67~69mm)
External power supply
It is also possible to power the device or charge the 18650 battery in
the device via an external USB power supply adapter(5V/2A) or
solar panel. (External power supply not included)
Charging by USB power supply Charging by solar panel
USB port function:（Auto detected by Camera）
►Power charging
In this mode, USB will charge the camera's 18650 battery.
►Mass Storage
In this mode, the camera will act as a storage device. You can read or
copy the photos or videos in the TF card.
Boly Trail Camera BG310 Series
5
2.2 TF Card Information
This camera uses a TF card, to take full advantage of the latest
technologies, we recommend Class 10 TF cards or better, which have
fast transfer speeds and long durability for extensive shooting in the
most extreme outdoor conditions.
Insert the TF card into the camera before turning on the
camera
This camera supports up to a 32GB capacity TF card and has no
built-in internal memory. The camera will not function without the
TF card properly inserted into the camera.
Do not remove the TF card while the camera is on
Removing the TF card while the camera is on risks damaging the
internal components of the camera.
If you experience any problems with an inserted TF card
Try reformatting the TF card by using the camera’s main settings
option.
2.3 SIM Card Information
This function is only available with communication
function models.
Insert the SIM card into the camera before turning on the
camera
The camera SIM card slot is sized for a standard SIM card. If you
have a nano or micro size SIM card, utilizing a SIM card adapter
(included with most of our cameras) will be required to connect your
camera to the cellular network via SIM card.
Supported Wireless Carrier Bands:
GSM: B3/B8
WCDMA: B1/B8
LTE FDD:B1/B3/B7/B8/B20/B28A
NOTE: The camera will still function without a SIM card. The SIM
card is needed only for the wireless/cellular messaging capabilities.
Boly Trail Camera BG310 Series
6
2.4 Camera Modes
The different modes are accessed by pressing the OK button, marked
on the camera.
OFF Mode
To turn off the camera when the display screen is active, press and
hold the OK button until the screen powers off. The camera will still
consume a small amount of battery power while in OFF mode. We
recommend removing the batteries if the camera will not be used for
a long period of time.
SETUP Mode [Test Mode]
To turn on the camera, press and hold the OK button until the
display screen activates,
In this mode, you can customize the camera settings or playback
pictures and videos the camera has taken on the LCD display.
After switching the camera to the ON position and if the camera is
left alone for more than 20 seconds, the camera will automatically
switch to Hunting Mode, as described below.
On [Hunting Mode]
In order to enter the on mode, first enter the setup mode, in the
setup mode, automatically enter the on mode after 20
seconds(BG310-M 60 seconds) without any operation.
Before entering Hunting Mode, the front (red) LED light will
continuously blink for approximately 10 seconds and then turn off.
This preset time allows you to adjust the camera’s position if needed
before the camera becomes active. The camera will take pictures or
videos when motion is detected and/or at specific time intervals,
according to the programmed settings.
Boly Trail Camera BG310 Series
7
2.5 Manage Images and/or Videos
Place the camera in TEST/SETUP mode and press the POWER
button to view images or videos, the latest image or video will be
shown on the LCD screen. Press the ▲/Up or ▼/Down buttons to
cycle through the pictures and videos were taken.
NOTE: Video cannot be viewed directly on the camera.
2.6 Sending via MMS/GPRS/Molnus
This function is only available with communication
function models.
Images can be sent directly to your wireless device/email/Molnus,
based on the Send Mode settings.
1) Insert the TF & SIM card into the camera before turning on the
camera.
2) Turn on the camera in TEST/SETUP mode. Make sure the SIM
card is recognized, and signal strength is adequate.
Indicates the camera recognizes the SIM card.
Indicates the camera or the SIM card do not recognize the
SIM card is not working due to connection/activation issues.
3) Select the send mode setting and fill in the correct parameters.
You have the options of Molnus (default setting), Phone MMS,
Email MMS, or Email GPRS. Videos will be sent in less than 20M.
4) Press “Power” to view the photos stored on the camera.
5) Find the picture you want to send manually.
6) Press the MENU button to pull up the Send To option.
7) Press “OK” to send the picture via the messaging option chosen
in your camera settings.
Boly Trail Camera BG310 Series
8
2.7 Password Setup
For encryption settings, enter your four-digit pre-set password to
enter the camera. This function helps protect your privacy.
This function is off by default. To use this function:
2.7.1 Press ▲/▼to adjust the number from 0~9, and /► to
change the password
2.7.2 The same password must be entered twice to take effect.
2.7.3 After the password is set up, you will be required to enter the
same password on the next boot to enter the camera.
If you forgot your password, please contact us for
assistance.
Boly Trail Camera BG310 Series
9
3. Camera Setup Settings & Display
3.1 Settings Interface & Display
To update the camera settings, turn the camera on to activate the
display screen.
OK/Power: Switch on and off, save parameter settings, enter or
exit playback mode
Menu: Enter or exit Menu
▲/Up: Setting items switching
▼/Down: options parameter switching, manually take a photo or
record a video
When the camera is in the ON Mode, the screen will activate and
display the following:
Indicates the camera recognizes the SIM card.
Indicates the camera or the SIM card do not recognize the
SIM card is not working due to connection/activation issues.
Note: SIM card/Signal strength/Telecom provider only appear in
models with a communication function.
18M
Boly Trail Camera BG310 Series
10
3.2 Wireless Model Setup
The features described in this section only support communication
models.
3.2.1 Mobile Communication
The camera can receive and respond to commands sent via SMS,
Molnus and the Apple or Android application, as long as the camera
is correctly connected to a wireless carrier.
To enable the SMS functionality using the mobile application, you
must complete the following steps:
Place the camera in Test/Setup Mode and go into the menu Setup
options
Set SMS control to ON
For MMS/GPRS/Molnus functionality, the following menu Setup
options will need to be set:
MMS network settings (varies depending on carrier)
GPRS network settings (varies depending on carrier)
Molnus (varies depending on carrier)
3.2.2 Setup Software of PC
Download the camera setup application (BMC_config.zip), from our
website: www.bolymedia.com/index/Support,connect Camera to
Computer with the USB cable, open the software and select camera
model.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Boly Appareil photo numérique
