Bogen SM1EZ Manuel utilisateur
•Installs in less than a minute
•Compatible with both 70V and 25V systems
•High intelligibility and efficiency
• Direct and reflected sound paths create wide
dispersion angle
• Lightweight and durable plastic shell with a
paintable finish
• Simple, three-step installation process
•No tool(s) installation
• Color-coded mounting studs identify polarity
to make the electrical connection easier (no
external wires)
• High-quality, wire-wound volume control on
outside of speaker for easy access
•Can be installed in any drop ceiling with stan-
dard ceiling tiles
•Surface-mounting design eliminates need to
cut ceiling tile,no mess installation
• Contemporary design blends/matches any
decor
•SM1EZ has a single,1-watt tap
•SM4T has switch selectable multiple taps for
controlling output level (taps - 4, 2, 1,1/2, 1/4
watts)
•O-ring seal holds speaker tight to ceiling sur-
face, eliminating whistling and ensures
smoother sound without peaks
• Textured studs easily pierce ceiling tile and
secure wire nut connections
• Wide-bottom, easy-to-handle mounting wing
nuts provide secure speaker mounting
•All necessary mounting hardware included
•Complies with NFPA National Code 160b
and UL-2043 (Report available)
The Bogen SM1EZ and SM4T Easy Install®Speakers are surface-mount speakers, designed to typi-
cally install in less than a minute.Installation is a simple,three-step process that does not require
tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing
nuts secure the speaker to the ceiling. Third, standard wire nuts make the electrical connection
directly to the color-coded studs. Both the SM1EZ and SM4T are lightweight, durable speakers with
a low-profile contemporary design, making them versatile enough to be installed in just about any
installation with standard ceiling tiles.
The SM1EZ is a 1-watt single-tap speaker. The SM4T is a 4-watt multi-tap speaker with a rotary
switch that eliminates transformer tap wires. Both models have an exterior volume control for easy
balancing that is easily accessible,but doesn’t attract tampering.
Features
Description
Specifications subject to change without notice.
© 2005 Bogen Communications, Inc.
Part No. 54-7620-01C Printed in U.S.A. 0505
Easy Install®
Speaker
Models SM1EZ, SM4T
SM1EZ SM4T
Power Rating (max.): 1W 4W
Selectable Power Taps: N/A 4, 2, 1,1/2, 1/4
(rotary switch selectable)
Constant Voltage Amp Type: 25V/70V 25V/70V
Frequency Response: 125 Hz-15 kHz 125 Hz-15 kHz
Sensitivity (min.) (1-watt @ 1meter on axis): 90 dBspl 90 dBspl
Dispersion (min.): 120° 120°
Controls: Volume Control Volume Control;
Tap Selector Switch
Product Weight: 2 lb.2 lb.
Shipping Weight: 3 lb.3 lb.
Diameter: 9-1/2" 9-1/2"
Height: 3" 3"
Base Diameter (against ceiling): 8-3/4" 8-3/4"
Construction: ABS Plastic ABS Plastic
Flame Rating: 94-5VA 94-5VA
Technical
Specifications
Architect
& Engineer
Specifications*
50 Spring Street, Ramsey, NJ 07446
Tel. 201-934-8500, Fax: 201-934-9832, Web Site: www.bogen.com
The speaker shall be a Bogen Model _____ (specify
SM1EZ or SM4T). The frequency response shall be
125 Hz to 15 kHz. Dispersion angle shall be no less
than 120°. Sensitivity, measured 1-watt @ 1meter
on axis, shall be a minimum of 90 dBspl.
The speaker shall comply with NFPA National Code
160b that allow speakers to be installed in plenums
and other air handling spaces.The speaker shall also
comply with UL-2043 (report available).
The speaker shall be of durable ABS plastic construc-
tion and shall be mounted using specially designed
studs that easily pierce ceiling tiles. Custom-designed
wing nuts shall be used for securing the speaker to
the ceiling tile,as well as two standard wire nuts to
connect the speaker wires to the studs. One stud
shall be copper- plated and the other nickel-plated as
a means of designating polarity.The speaker shall
include a large,rubber O-ring seal to hold the base
of the speaker cavity tight to the ceiling tile.
The unit shall measure 9-1/2" in diameter by 3" in
depth. Base diameter against ceiling shall be 8-3/4".
Product weight shall be 2 lb.
Use for SM1EZ. The unit shall incorporate a 1-watt
single-tap with wire-wound volume control for use in
25V/70V constant voltage speaker systems.
Use for SM4T.The unit shall incorporate a rotary
switch to select power settings of 4, 2, 1,1/2, and 1/4
watts with wire-wound volume control for use in
25V/70V constant voltage speaker systems. T h e
speaker’s settings are to be rotary-switch selectable.
25V/70V selectable with jumper on PCB.
*Architect & Engineer Specifications are available on the Bogen
website in a Microsoft® Word document to assist you with
preparing your bids.
Front View Side View
Ce manuel convient aux modèles suivants
1
Autres manuels Bogen Intervenants
Bogen
Bogen ACD2X2 Manuel utilisateur
Bogen
Bogen SM4T Manuel utilisateur
Bogen
Bogen NEAR Orbit OCS1 Manuel utilisateur
Bogen
Bogen NEAR LB4TM Manuel utilisateur
Bogen
Bogen HFCS1 Mode d’emploi
Bogen
Bogen A2 Manuel utilisateur
Bogen
Bogen SMTB Manuel utilisateur
Bogen
Bogen Nyquist NQ-S1810CT-G2 Manuel utilisateur
Bogen
Bogen 14018 Manuel utilisateur
Bogen
Bogen MB8TSL Manuel utilisateur
Bogen
Bogen BBFM6 Manuel utilisateur
Bogen
Bogen Easy Design WB1EZ Manuel utilisateur
Bogen
Bogen SCW20 Manuel utilisateur
Bogen
Bogen Easy Design HS15EZ Manuel utilisateur
Bogen
Bogen Bogen NEAR ORBIT OPS1 Mode d’emploi
Bogen
Bogen Nyquist NQ-S1810CT-G2 Feuille d'instructions
Bogen
Bogen A2 Manuel utilisateur
Bogen
Bogen S810T725PG8W Manuel du propriétaire
Bogen
Bogen A2 Manuel utilisateur
Bogen
Bogen R6/R6T Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur