Page | 3
Safety
This machine is a high-performance battery operated tool.
Failure to follow the warnings and instructions may result
in an electric shock, fire or serious injuries.
• Always operate the tool with personal protection
equipment (including eye protection, etc.). Using the
appropriate safety equipment at all times will avoid
body injury.
• Keep children and bystanders away while operating
this tool. Distractions may cause serious accidents.
• Do not aim the tool at those standing around your
work area. Serious accidents can happen if you mis-
handle this tool.
• Do not place your hand or position the machine near
your body. This could cause serious injury.
• Do not attempt to dismantle, modify or perform any
major maintenance on this tool. Modifications may
result in a deterioration of the tool’s performance and
may cause serious injury and void he warranty.
• Make sure that the main switch is in the off position
when the tool is not being used or when abnormalities
occur. When changing or adjusting the wire coil, or
when changing the battery pack, make sure to turn off
the main power switch and lock the trigger.
• Do not place fingers or hands in the wire coil area.
This may result in distortion of the coil and may cause
injury to you.
• Do not operate this tool in the rain or areas where
moisture is present. This may result in electrical
shock or accident.
• Stay particularly alert while working in a high area.
Do not operate any power tool under the influence of
drugs, alcohol, or medication. A moment of inatten-
tion may result in serious injury to you or someone
near you.
• Do not operate this tool in a hazardous area contain-
ing flammable liquid, gas or powders which may ignite
and cause a fire.
• The charger has been designed to use standard AC
power (100-240V ~ 50-60Hz). Do not recharge the
battery using a generator power supply as this will
cause the charger to malfunction.
• Our batteries charge best when the ambient tempera-
ture is between 32°F and 113°F. Super-cooling or over-
heating environments are not suitable for charging.
• Continuous use of the charger is not advised as this
will shorten the life span of the battery and the perfor-
mance of the charger itself. When not in the charging
mode the power supply must be turned off.
• Please do not carry the charger by the cord. Do not
pull out the power cord from the wall socket with the
cord, this will damage the cord and break the wires or
cause a short circuit. A damaged cord must be re-
paired or replaced immediately.
• Use only the specified charger that came with your
machine. Using an unauthorized charger may result
in damage to the battery components and possible
explosion.
• Avoid battery terminal contact with other metal ob-
jects. Trying to recharge the battery with an external
wire could result in a short circuit of the battery.
• Do not throw away the protective battery cap. Use it to
cover the terminal when not in use.
Safety Locks
Make sure that all safety features are
operational before using any power tool.
DO NOT OPERATE THE TOOL IF THE
SAFETY LOCKS ARE NOT FUNCTIONAL.
This tool is equipped with the
following safety devices:
The Main Switch: Please turn the main switch off when not
in operation.
The Trigger Lock: Always turn the trigger lock to the off
position when not in use or when changing the wire spool.
Technical Data
Tool Specs
Product No. BNT-25x BNT-40x BNT-58x
Weight Information
Tool Only 4.15 lbs.
(1.9 kg)
4.45 lbs.
(2.02 kg)
4.85 lbs.
(2.2 kg)
Tool + Battery 5.5 lbs.
(2.5 kg)
5.8 lbs.
(2.63 kg)
6.2 lbs.
(2.8 kg)
Tool+Battery
+Spool
6.4 ils.
(2.91 kg)
6.7 lbs.
(3.04 kg)
7.1 lbs.
(3.22 kg)
Height 11.81 in.
(300mm)
11.81 in.
(300mm)
12.2 in.
(310mm)
Width 4.29 in.
(109mm)
4.29 in.
(109mm)
4.29 in.
(109mm)
Length 11.06 in.
(281mm)
11.69 in.
(297mm)
12.28 in.
(312mm)
Ties per coil 160 - 220 120 - 160 90 - 120
Wraps per Tie 3 Wraps/tie
Time per Tie 0.6 - 0.8 sec per tie
Max Tying Diameter 1”
(25mm)
1.575”
(40mm)
2.283”
(58mm)
#3 x #4
bar
#6 x #6
bar
#8 x #8
bar
Battery Li-Ion 18V, 4.0Ah, 72Wh
(BNTLI-18)
