7. PROTECTORS TO BE USED DURING OPERATION OF THE MACHINE
7.1The protective clothing:
•Hard hat
•Glasses
•Safety Shoes
•Gloves
The above mentioned protectors are to be used. Otherwise, there is a risk of injury and body
harm.
7.2 Work clothing:
The objects having the risk of getting caught and seized up while working on the machine are
listed below, which may cause injury if not observed.
Long hair, dress with long sleeves, jewelry on arm, aprons with long bottoms, jewelry
protruding from the body.
8. TRANSPORTATION OF THE MACHINE
The machine should be carried and transported by means of the forklift, traveling crane or
EOT cranes. The forklift may only be used when the machine is enclosed in the box. To carry
the machine in the boxed situation, a wedge should be inserted underneath the machine in a
manner not allowing the wheels of the machine to contact with the box surface or the wheels
will be pulled out. The steel rope chain and polyester sling shot should be used for lifting the
machine. The lifting from the box ring on the machine should be used for lifting without a
box. The experienced expert people and subcontractors should be employed in the lifting
works.
WARNING!!!
The machine should be moved without vibration. The machine should not be carried in the
wet places. Any parts lost or damaged during the transportation process should be notified to
the manufacturer in the form of a report
•When using the lifting and handling equipment, the maximum carrying capacity of
these equipments will be taken into consideration.
•The weight gravity center of the equipment should be taken into consideration during
the lifting.
•The warning signals on all of the handling equipments should be observed.
