BrightSign Player Publishing
To publish a BrightAuthor presentation, navigate to the Publish Tab.
Select your publishing method from directly underneath the Publish tab, either
Local Storage, Local Network, or Simple File Network
Browse to the folder containing your project.
Select your project from the list. By default, the selected presentation will
display always, indefinitely. You may schedule this presentation to only play
during certain times via the schedule to the right or schedule the player to
switch between multiple presentations.
For Local Storage:
Browse to an SD card, USB drive or folder you wish to write the published
presentation to.
Select Standalone unit to only publish the presentation.
Select Standalone unit with setup to include player setup with the presentation.
For Local Network:
Select the unit or multiple units you wish to publish to from the populated list.
The units name and/or appended ID will appear if the player was set up for
Local Network publishing and is on the same network as your computer.
If your unit does not appear in the list, turn on the player without its micro SD
card inserted. At the start-up screen, note the players IP address.
Select the + icon under the Networked Units list in BrightAuthor and type the
player’s IP address.
For Simple File Network:
Select “Set Parameters”
Type the URL for the web folder to which you are publishing
Set the frequency at which the player will check for updates to that folder.
Browse to the SD card or folder you wish to publish to and place the published
files in your web folder.
