BlueChip RE2 Manuel utilisateur

Page | 1

RE2

Single Board Computer

User Guide

Document Reference: RE2 User Guide

Document Issue: 2.2

RISC Engine II Table Of Contents

Page | 2

Contents

Copyright ............................................................................................................................................................ 4

Limitations of Liability ....................................................................................................................................... 4

Trademarks ......................................................................................................................................................... 4

Regulatory Statements ........................................................................................................................................ 5

Safety Warning for North America .................................................................................................................... 5

Manual Organisation .............................................................................................................................................. 6

Introduction ............................................................................................................................................................ 7

Functional Overview .......................................................................................................................................... 8

Specification ....................................................................................................................................................... 9

General Precautions .............................................................................................................................................. 10

Electro-Static Discharges .................................................................................................................................. 10

On-Board Battery ............................................................................................................................................. 10

Electromagnetic Compatibility ......................................................................................................................... 10

Mechanical Specifications .................................................................................................................................... 12

Connector Locations ............................................................................................................................................. 13

Optional Communications Module ................................................................................................................... 14

Connector Details ............................................................................................................................................. 15

P1 – Ethernet Connector ............................................................................................................................... 15

P2 – Dual USB Connector (Edge of Board) ................................................................................................. 15

P3 – USB Device .......................................................................................................................................... 16

P4/P15 – Power in Connector ....................................................................................................................... 16

P5 – Audio Connector .................................................................................................................................. 16

P6 – GPIO Connector ................................................................................................................................... 17

P7 – Utilities Connector................................................................................................................................ 19

P9 – Dual USB Connector (Header) ............................................................................................................. 19

P10 – RS232 Full Connector ........................................................................................................................ 20

P11 – RS232 & RS422/485 Connector ......................................................................................................... 20

P8 – Video Connector ................................................................................................................................... 21

System Software ................................................................................................................................................... 24

Operating Systems Supported ........................................................................................................................... 24

General Purpose I/O ......................................................................................................................................... 24

RE2 Graphical User Interface(GUI) ................................................................................................................. 25

System Firmware .................................................................................................................................................. 27

Operating System Settings ................................................................................................................................ 28

Splash Screen .................................................................................................................................................... 29

Display Configuration ...................................................................................................................................... 30

Custom Settings ............................................................................................................................................ 31

Firmware Update .............................................................................................................................................. 33

Maintenance ......................................................................................................................................................... 34

RISC Engine II Table Of Contents

Page | 3

Amendment History ......................................................................................................................................... 35

Appendix I: Options and Assembly Guidelines ............................................................................................ 36

RE2 Antennae Guide .................................................................................................................................... 41

RISC Engine II Introduction

Page | 4

in any form or by any means, electronic, mechanical, photocopied, recorded or otherwise, without the prior

permission, in writing, from the publisher. For permission in the UK please contact Blue Chip Technology.

Information offered in this manual is believed to be correct at the time of printing. Blue Chip Technology

accepts no responsibility for any inaccuracies. The information contained herein is subject to change without

notice. There are no express or implied licences granted herein to any intellectual property rights of Blue Chip

Technology Ltd.

Limitations of Liability

In no event shall Blue Chip Technology be held liable for any loss, expenses or damages of any kind

whatsoever, whether direct, indirect, incidental or consequential, arising from the design or use of this product

or the support materials supplied with this product. If this product proves to be defective, Blue Chip Technology

is only obliged to replace or refund the purchase price at Blue Chip Technology's discretion according to their

Terms and Conditions of Sale.

Trademarks

All trademarks and registered names acknowledged.

IBM, PC, AT and PS/2 are trademarks of International Business Machines Corporation (IBM).

AMD is a registered trademark of Advanced Micro Devices Inc.

MSDOS and WINDOWS are registered trademarks of the Microsoft Corporation.

RISC Engine II Introduction

Page | 5

Regulatory Statements

This product has been designed and assessed to meet the essential protection requirements of the European

EMC Directive (2004/108/EC), the Low Voltage Directive (2006/95/EC), and the R&TTE Directive

(1999/5/EC) when installed and used in conjunction with the guidelines provided within this document.

[Note that compliance with the R&TTE directive is only required for those versions of the product equipped

with radio frequency interfaces].

FCC

NOTE:

FCC compliance of product versions equipped with radio frequency interfaces may require specific approval for

the finished products.

WARNING:

Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate

the equipment.

Safety Warning for North America

If the power lead (cord) is not supplied with the computer, select a power lead according to your local electrical

regulations. In the USA use a 'UL listed' lead. In Canada use a CSA approved or 'cUL listed' lead.

Si le cordon secteur n'est pas livré avec l'ordinateur, utiliser un cordon secteur en accord avec votre code

electrique nationale. En l'Etat Unis utiliser un cordon secteur 'UL listed'. En Canada utiliser un cordon secteur

certifié CSA, ou 'cUL listed'.

RISC Engine II User Guide Organisation

Page | 6

Manual Organisation

This manual describes in detail the RE2 Product range.

We have tried to include as much information as possible but we have not duplicated information that is

provided in the standard Technical References, unless it proved to be necessary to aid in the understanding of

the product.

The manual is sectioned as follows:

Introduction;

Overviews, showing outline dimensions;

Layout, showing where the various connectors are located, and their pin-out details;

Firmware Setup

Maintenance details

We strongly recommend that you study this manual carefully before attempting to interface with the RE2 or

change the standard configurations. Whilst all the necessary information is available in this manual we would

recommend that unless you are confident, you contact your supplier for guidance.

IT IS PARTICULARLY IMPORTANT THAT YOU READ THE SECTION 'PRECAUTIONS' BEFORE

HANDLING ANY COMPONENTS INSIDE THE UNIT.

If you have any suggestions or find any errors concerning this manual and want to inform us of these, please

contact our Technical Services department with the relevant details.

RISC Engine II Product Summary

Page | 7

Introduction

The Blue Chip Technology RE2 (BCT-RE2) sets very high standards for integration of the processor, graphics,

memory, and I/O technologies together with a unique connection system for selected LCDs.

The BCT-RE2 was introduced with two CPU options, 600MHz and 720MHz. The 600MHz CPU was also

available as an extended temperature product. All RE2s are supplied with 256MB of SDRAM and 256MB of

NAND Flash. Further, additional NAND Flash can be added through either the optional μSD Card or optional

MMC socket, if fitted.

From 2015, the BCT-RE2 will have two new CPU options based on a 1GHz CPU, which will be offered as a

Standard temperature or an Industrial temperature board. Although the 600MHz and 720MHz options will no

longer be available, the 1GHz board is able to be clocked down to 600MHz and 800MHz for customers with

applications that may not suit the faster CPU. This can be achieved for Windows CE6 and EC7 via an updated

Graphical Utility

The BCT-RE2 can operate from 7V DC input through to 36V DC input. Power requirements will vary

depending on the LCD panel and other peripherals attached to the RE2.

For example with the older 600MHz BCT-RE2 with the U.R.T. UMSH-8173MD-1T 5.7” Combined LCD and

Touch Screen, the operational power requirements will vary between 5W for Windows CE6, without

applications running, up to 10W with applications running and peripherals attached. With the 1GHz CPU board,

power levels are comparable with the 720Mhz board, indeed running the same application will actually be

slightly lower power level on the 1GHz board, as the CPU will not be working as hard

On its own, the RE2 operates at approximately 2W without power saving.

The BCT-RE2 has the capability to support a Lithium Battery via connector P14 to retain time when the unit is

powered off.

RISC Engine II Overview

Page | 8

Functional Overview

The following block diagram shows the key components of the RE2

OMAP

U H

t e

i a

l d

i e

t r

y .

GPIO

x12

(1.8V

- 5V)

Touch

Screen DVI LCD SD

Card

Module

Connector

RAM

NAND

Camera

Bluetooth

WiFi

USB Host

x 4

RS485

RS-232

Full

RS-232

2 wire

USB

Device

Audio

GSM

MIC

Line

OUT

Ant-

enna

Ant-

enna

Module

Connector

Ant-

enna

Power

Accelerometer

GPS

GSM / GPRS

GSM Audio

Ant-

enna

RISC Engine II Overview

Page | 9

Specification

• Texas Instruments OMAP DM3730 Applications Processor

• 256 MB SDRAM soldered onboard

• 256 MB NAND Flash soldered onboard

• Optional μSD Card NAND Flash Storage

• Video Controller - 18 bit RGB TTL

• 4 wire Touchscreen Controller

• 10/100 Ethernet including magnetics

• Quad USB 2.0 Hosts

• Single USB 2.0 Device

• Dual RS-232 (1 Full, 1 2-wire)

• Single RS-485

• Audio Codec Interface

• Battery backed Real-Time Clock

• 12 GPIO lines

• Utilities connector

• Wide Input Voltage – 7 to 36 volts (note: Input current is restricted to 1.6A maximum)

• Low power consumption – typically 2 watts (LCD not included)

• Bluetooth Class 2

• 802.11 b/g Wi-Fi

• Camera Interface

• Comms Interface (CM Module – GPS, GPRS)

RISC Engine II Precautions

Page | 10

General Precautions

Your Single Board Computer is susceptible to damage by electrostatic discharges. In order to avoid damage,

you should work at an anti-static bench and observe normal anti-static precautions. Wear an anti-static wrist

strap connected to an earth point before opening any packaging.

Where a wrist strap is not available, discharge any static charge you may have built-up by touching an earth

point. Avoid any further movement that could build up another static charge. Touch an earth point from time to

time to avoid further build-up, and remove the items from their anti-static bags only when required

Electro-Static Discharges

If you are going to open up the unit, it is important to realise that the devices on the cards within this unit can be

damaged by static electricity. Bear in mind that the damage caused by static electricity may vary from total

destruction to partial damage, which may not be immediately obvious. This could have an effect on the

product's reliability and warranty. Before opening the chassis, ensure that you take necessary static precautions.

Ideally you should work at an anti-static bench and wear an approved wrist strap or if that is not possible, touch

a suitable ground to discharge any static build up before touching the electronics. This should be repeated if the

handling continues for any length of time.

If it is necessary to remove a board or electronic assembly, place it into an anti-static bag. This will prevent any

static electricity build up damaging the board. Metallised bags are preferred. Do not use black anti-static bags

for any item containing a battery because these tend to be conductive and will discharge the battery.

On-Board Battery

The processor board can be fitted with a Lithium battery. Great care should be taken with this type of battery. If

the battery is mistreated in any way there is a very real possibility of fire, explosion, and personal harm. Under

NO circumstances should it be short-circuited, exposed to temperatures in excess of 100°C or burnt, immersed

in water, recharged or disassembled.

Expired batteries remain hazardous and must be disposed of in a safe manner, according to local regulations.

Le panneau de processeur est équipé d’une batterie de lithium. Le grand soin devrait être pris avec ce type de

batterie. Si la batterie est mistreated il y a de dans de toute façon un possibility très vrai du feu, d’expolosion et

de mal personnel. Dans au cunes circonstances il est sous peu circuité, exposé aux températures au dessus de

100 degrés de centrigrade ou brûlé, immergé dans l’eau, rechargée ou dissassambled.

Les batteries expirées restent dazaedous et doivent être reejetées d’une façon sûre, selon des règlements locaux.

Electromagnetic Compatibility

This product has been assessed operating in representative, standard configurations. As with any PC product,

however, final installation & configuration can vary significantly, and so the following guidelines are offered to

help ensure that compatibility is maintained.

 All components added to a system should either carry appropriate equivalent levels of compliance, or

be tested for compliance as part of the final system, and should be installed in accordance with supplier

recommendations.

 The external enclosure should be securely fastened (with standard lids and covers in place) to ensure

good metal-to-metal contact around the internal electronics

Table des matières

Autres manuels BlueChip Carte mère

BlueChip

BlueChip BCT-ETX-C3-XXX Manuel utilisateur

BlueChip

BlueChip BCT-ETX-CN700 Manuel utilisateur

BlueChip

BlueChip RE3 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur