Black Box LPE108AE Manuel utilisateur

BL A C K B O X®

Perfect for small- to medium-sized workgroups,

this switch provides eight 10/100-Mbps ports.

Port 8 is a Power over Ethernet (PoE) powered device port.

8-Port 10/100 Switch with (1) PoE PD Port

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax

724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,

PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]

Customer

Support

Information

LPE108AE

Page 2 724-746-5500 | blackbox.com

8-Port 10/100 Switch with (1) PoE PD Port

FEDERAL COMMUNICATIONS COMMISSION AND

INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy,

and if not installed and used properly, that is, in strict accordance with the

manufacturer’s instructions, may cause interference to radio communication.

It has been tested and found to comply with the limits for a Class A computing

device in accordance with the specifications in Subpart J of Part 15 of FCC rules,

which are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of

this equipment in a residential area is likely to cause interference, in which case

the user at his own expense will be required to take whatever measures may be

necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant

les limites applicables aux appareils numériques de la classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par Industrie Canada.

EUROPEAN COMMUNITY (CE)

ELECTROMAGNETIC COMPATIBILITY DIRECTIVE

This equipment has been tested and found to comply with the protection

requirements of European Emission Standard EN55022/EN61000-3 and the

Generic European Immunity Standard EN55024.

EMC:

EN55022 (2003)/CISPR0-2 (2002): Class A

IEC61000-4-2 (2001): 4 KV CD, 8 K AD

IEC61000-4-3 (2002): 3 V/m

IEC61000-4-4 (2001): 1 kV (power line), 0.5 kV (signal line)

Page 3

724-746-5500 | blackbox.com

NOM Statement

Normas Oficiales Mexicanas (NOM)

Electrical Safety Statement

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el

aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean

recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá

lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe

colocar en libreros o gabinetes que impidan el flujo de aire por los orificios

de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del

tipo descrito en el instructivo de operación, o como se indique en el

aparato.

Page 4 724-746-5500 | blackbox.com

8-Port 10/100 Switch with (1) PoE PD Port

12. Precaución debe ser tomada de tal manera que la tierra fisica y la

polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

Page 5

724-746-5500 | blackbox.com

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc.

Any other trademarks mentioned in this manual are acknowledged to be

the property of the trademark owners.

Page 6 724-746-5500 | blackbox.com

8-Port 10/100 Switch with (1) PoE PD Port

1. Specifications

Buffer Memory: Embedded 1-Mbps frame buffer

Certifications: FCC Class A, CE

Flow Control: IEEE 802.3x compliant for full duplex; backpressure flow control

for half duplex

Full Forwarding/Filtering Rate (pps):

148,800 pps at 100 Mbps, 14,880 pps at 10 Mbps

MAC Address: 2 K

Standards: IEEE 802.3af, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX,

IEEE 802.3x flow control

Transmission Media: 10BASE-T CAT3, 4, 5 UTP/STP; 100BASE-TX CAT5

UTP/STP

Transmission Mode: 10-/100-Mbps support, full- or half-duplex

Transmission Speed: 10-/100 Mbps for twisted pair

Switching Method: Store and forward

Connectors: (8) RJ-45 10/100BASE-TX with (1) PD/PoE port, (1) barrel connector

for power

LED Indicators: Per port: LINK/ACT;

Per unit: Power

Temperature Tolerance: Operating: +32 to +131° F (0 to +55° C);

Storage: -4 to +194° F (-20 to +90° C)

Relative Humidity: 10 to 90% (noncondensing)

Power: Input: 5 VDC, 2 A;

Power consumption: 6 watts (maximum)

Size: 0.9"H x 3"W x 5.4"D (2.4 x 7.7 x 13.6 cm)

Weight: 0.77 lb. (0.35 kg)

Page 7

724-746-5500 | blackbox.com

Chapter 2: Overview

2. Overview

2.1 Introduction

This high-performance switch provides eight 10-/100-Mbps ports. Port 8 is a

power device (PD) port that receives power from other power source equipment

(PSE) ports via CAT5 cables.

The switch is easy to install in an environment where network traffic and the

number of users increases continually, and you need to keep adding workgroups.

The compact device was designed specifically for small to medium workgroups.

Install it where space is limited.

2.2 What’s Included

Your package should include the following items. If anything is missing

or damaged, contact Black Box Technical Support at 724-746-5500

or info@blackbox.com.

• (1) 8-Port 10/100 Switch with (1) PoE PD Port

• (1) power adapter

• This user’s manual

2.3 Hardware Description

2.3.1 Front Panel

Figure 2-1 shows the unit’s front panel. Table 2-1 describes its components.

Figure 2-1. Front panel.

Table 2-1. Front-panel components.

Number Component Description

1 Power LED Lights when power to the unit is on

2, 3 (8) LINK/ACT LEDs Each LED lights when there is activity

on the corresponding connected port.

LED 8 is also for the PD/PoE port

connection.

Page 8 724-746-5500 | blackbox.com

8-Port 10/100 Switch with (1) PoE PD Port

2.3.2 Back Panel

Figure 2-2 shows the unit’s back panel. Table 2-2 describes its components.

Figure 2-2. Back panel.

Table 2-2. Back panel components.

Number Component Description

3 (7) RJ-45 ports Link to RJ-45 devices

4 (1) RJ-45 port PoE PD port

2.4 LED Indicators Descriptions

Table 2-3. LED indicators.

LED Status Description

Power On Power is on

Off Power is off

LINK/ACT On Port is connected

Off Port is not connected

Flashing Data is being transmitted or received

Page 9

724-746-5500 | blackbox.com

Chapter 3: Installation

3. Installation

Twisted-pair port and cable installation:

1. The twisted-pair port on the switch supports Auto MDI/MDI-X crossover, so

you can use either straight-through or cross-pinned cable. Just plug-and-play.

2. Connect one end of a CAT5 or above twisted-pair cable to an RJ-45 port on

the switch. Connect the other end of the cable to a workstation or server.

3. Repeat Steps 1 and 2 above for each device that you want to connect to the

switch.

For successful installation and optimum performance, make sure you use CAT5

or higher-grade cable. If you use lesser-grade cables, the network will perform

poorly. For a 100-Mbps Fast Ethernet connection, use CAT5 or CAT5e cable

that’s up to 328 feet (100 meters) long.

Power on:

Power the switch via a PoE PSE (Power Source Equipment) device or from an

external DC power adapter. Make sure your PoE PSE device complies with 802.3af

and uses 48 VDC.

When you power on the device, all LED indicators will light immediately, then go

off. However, the power LED remains on.

Power input

Figure 3-1. Power input on the switch.

NOTE: When powering the device from PoE PSE, make sure it supplies at least

48 VDC, 125 mA.

Page 10 724-746-5500 | blackbox.com

NOTES

Table des matières

Langues :

Autres manuels Black Box Changer

Black Box

Black Box LE2700A Manuel utilisateur

Black Box

Black Box CAT5 ClassWork Plus Multiloop Manuel utilisateur

Black Box

Black Box S-COS/2 Manuel utilisateur

Black Box

Black Box SWL065A Manuel utilisateur

Black Box

Black Box LBH120A-H SERIES Manuel utilisateur

Black Box

Black Box MODULAR SMART SWITCH SW925AE Manuel utilisateur

Black Box

Black Box IC454AE Manuel utilisateur

Black Box

Black Box Remote Management Switch SW555A Manuel utilisateur

Black Box

Black Box KV9208A Manuel utilisateur

Black Box

Black Box SW930A-R2 Manuel utilisateur

Black Box

Black Box ACXC Series Manuel utilisateur

Black Box

Black Box KV6108SA-R2 Manuel utilisateur

Black Box

Black Box KV9304A Manuel utilisateur

Black Box

Black Box ServSwitch KV1510A Manuel utilisateur

Black Box

Black Box LB9019A-R3 Manuel utilisateur

Black Box

Black Box ServSwitch ACU5001A Manuel utilisateur

Black Box

Black Box LBG1000A Manuel utilisateur

Black Box

Black Box ServSwitch Multi KV150A-R2 Manuel utilisateur

Black Box

Black Box COS-2 Manuel utilisateur

Black Box

Black Box SW056A Manuel utilisateur

Black Box

Black Box KV7003A Manuel utilisateur

Black Box

Black Box LPD100A Manuel utilisateur

Black Box

Black Box KVIP1016A Manuel utilisateur

Black Box

Black Box LB9902A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur