Black Box ICI207A Manuel utilisateur

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com

Page 5 Page 6

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc. Any other trademarks mentioned in this manual

are acknowledged to be the property of the trademark owners

ICI207A, version 1

BL A C K B O X®

Quick Start Guide

Isolated and non-isolated models available.

Industrial Grade 7-Port USB Hubs

ICI207A

ICI208A

Black Box Tech

Support: FREE! Live.

24 / 7. Tech support

the way it should be.

Great tech support is just 30 seconds

away at 724-746-5500 or blackbox.com.

Order toll-free in the U.S.:

Call 877-877-BBOX

(outside U.S. call 1-724-746-5500)

FREE technical support

24 hours a day, 7 days a week:

Call 724-746-5500 or

fax 724-746-0746

Mailing address:

Black Box Corporation

1000 Park Drive

Lawrence, PA 15055-1018

Web site: www.blackbox.com

E-mail: info@blackbox.com

Customer

Support

Information

BL A C K B O X®

Industrial Grade 7-Port USB Hub

Table 1. LED indicators.

LED Type State Description

USB Power

The hub is running on USB power.

External power is not applied. The hub

can supply up to 100 mA power per

downstream port.

OFF The hub is either using external power, or

no power is present.

External Power

External power is applied, and an active

host connection exists. The hub will

provide 500 mA per downstream port.

OFF The hub is bus powered (ICI207A only)or

no power is present (ICI208A).

Port LEDs 1–7

ON Port is active and ready for use.

OFF Port has a fault. Power may need to be

cycled.

Troubleshooting

Problem: The hub is installed, but a downstream

device isn’t working.

Solution: Some USB devices get their power from the

USB cable. If you are using the ICI207A without an

external power supply, it will only provide 100 mA to

the downstream ports. If your devices need more

power, connect an external power supply to the

ICI207A. It will then provide 500 mA to the

downstream ports.

Problem: Do I need drivers for the hub?

Solution: No, the operating system will detect it and

install it automatically.

Problem: How can I be sure it has been installed?

Solution: The new hub will be listed in the Device

Manager.

Troubleshooting (Continued from page 5)

Problem: Can I use USB 1.1 and USB 2.0 devices

together?

Solution: Yes. USB 2.0 is backwards-compatible with

USB 1.0 and 1.1.

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com

Industrial Grade 7-Port USB Hub Industrial Grade 7-Port USB HubIndustrial Grade 7-Port USB Hub

Page 3Page 2 Page 4

What’s Included

Your package should include the following items. If

anything is missing or damaged, contact Black Box

Technical Support at 724-746-5500 or

info@blackbox.com.

• (1) Industrial Grade 7-Port USB Hub

• (1) USB cable

• (2) panel-mount adapters and (4) mounting screws

• (1) DIN rail adapter and (3) mounting screws

• This quick start guide

NOTE: A power supply is not included.

Overview

Figure 1 shows the front view of the hub. Figure 2

shows the side view.

To USB host LED

indicators Downstream

ports

Figure 1. Front view.

Detachable

terminal

block

Barrel power

plug

Figure 2. Side view

Installation Steps

Step 1: Mounting

DIN rail mounting: Attach the DIN rail bracket with

the flat surface of the bracket facing the back of the

hub, as shown in Figure 3.

DIN rail

bracket

Figure 3. DIN rail bracket attached to hub.

Panel mounting: Attach the panel-mount brackets to

either side of the hub. They can be attached in (4)

positions: up, down, forward, and backward.

Panel-mount

brackets

Figure 4. Panel-mount bracket positions.

Step 2: Connect the Power Supply

ICI207A: The non-isolated Industrial Grade 7-Port USB

Hub (ICI207A) can operate without an external power

supply. When the hub is running on USB power,

it provides a maximum of 100 mA to each of the

downstream ports.

ICI208A: Unike the non-isolated hub, the isolated

Industrial Grade 7-Port USB Hub (ICI208A) will not

operate without an external power supply. You can

use the detachable terminal block input or the locking

barrel jack. The terminal block is polarity protected.

When powered, the ICI207A and ICI208A will provide

500 mA to each downstream port. They require 10

to 30 VDC of external power and will consume a

maximum of 16 W.

NOTE: The ICI208A adds 4-kV isolation.

Step 3: Grounding

We recommend that you ground the chassis. Connect

a grounding wire from the green ground lug to a

good source of earth ground.

Figure 5. Grounding the chassis.

Step 4: LED Status

Figure 6 shows the LEDs on the ICI207A and ICI208A.

Table 1 describes their functions.

Figure 6. ICI207A.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Black Box Changer

Black Box

Black Box KVT8DVIU Manuel utilisateur

Black Box

Black Box PSE508MA Manuel utilisateur

Black Box

Black Box ACR1012A-T Manuel utilisateur

Black Box

Black Box KV130A Manuel utilisateur

Black Box

Black Box SWI080A-R3 Manuel utilisateur

Black Box

Black Box AVSC-HDMI2-8X2 Manuel utilisateur

Black Box

Black Box LGB2118A Manuel utilisateur

Black Box

Black Box LB9002A-SC-R3 Manuel utilisateur

Black Box

Black Box ServSelect KV124A-PS2 Manuel utilisateur

Black Box

Black Box VGA to Video Portable Plus Manuel de la liste des pièces

Black Box

Black Box LPH1004A Manuel utilisateur

Black Box

Black Box IC454AE Manuel utilisateur

Black Box

Black Box LGB5510A Manuel utilisateur

Black Box

Black Box SW980A Manuel utilisateur

Black Box

Black Box KV1416A-R2 Manuel utilisateur

Black Box

Black Box LIE402A Manuel utilisateur

Black Box

Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch Manuel utilisateur

Black Box

Black Box LPD100A Manuel utilisateur

Black Box

Black Box ServSwitch Wizard SW641A Manuel utilisateur

Black Box

Black Box ServSwitch KV1608C-R3 Manuel utilisateur

Black Box

Black Box KV404A Manuel utilisateur

Black Box

Black Box LGB408A Manuel d'instructions

Black Box

Black Box JPM816A-HD Manuel utilisateur

Black Box

Black Box LPH1004A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur