Black Box RM069A Manuel utilisateur

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

VPN: ISBXSO

CUSTOMER

SUPPORT

INFORMATION

JUNE 1999

RM069A

RM070A

RM080A

Swing-Out Rack

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CHAPTER 1: Specifications

Load Capacity — 100 lb. (45.5 kg)

Rack-Space Capacity — RM069A: 20U; RM070A: 12U; RM080A: 25U (1U = 1.75" or

44.4 mm vertical)

Hole Tapping — 12-24 front and rear

Hole Spacing — Complies with EIA-310-D (.625-6.25-.500)

Material — 12-gauge steel

Finish — Black powder coat

Dimensions — RM069A: 37.9"H x 20.7"W x 18"D (96.3 x 52.6 x 45.7 cm)

RM070A: 23.9"H x 20.7"W x 18"D (60.8 x 52.6 x 45.7 cm)

RM080A: 46.7"H x 20.7"W x 18"D (118.5 x 52.6 x 45.7 cm)

Weight — RM069A: 48 lb. (21.8 kg); RM070A: 38 lb. (17.3 kg); RM080A: 55 lb. (25 kg)

1. Specifications and Drawings

Figure 1-1. Full view. Figure 1-2. Front, top, and side views.

37.92"

(RM069A)

23.92"

(RM070A)

46.67"

(RM080A)

18.00"

3.00"

37.92"

(RM069A)

23.92"

(RM070A)

46.67"

(RM080A)

20.71"

1" = 2.54 cm

16.00"

Rr. Mounting

Locations

20.00"

Swing-Out

Frame

Right-Hinge

Quick-

Release Pins

Cable-Tie Lances

Along Rear Verticals

and Inside Top and

Bottom

Left-Hinge

Quick-

Release

Pins

Rails

Tapped

12-24 Both

Front and

Back;

3" Channel

Accepts

Most

Telecomm-

Rack

Accessories Cable-

Tie

Slots

Along

Both

Sides

16-Inch-Wide

Mounting for Easy

Attachment to

Standard Wall Studs

18.31"

Hole to Hole

17.81"

Clearance

SWING-OUT RACK

The Swing-Out Rack is a great tool that eases the tedious task of installing and maintaining your site

wiring. Because it has unique spring-loaded hinges and release pins, you can easily unlatch and

swing open the front part of the Rack frame in order to mount, dismount, and cable devices. And

yet the Rack is simple to assemble. It comes in three different heights: 38" (96 cm, our product

code RM069A), with 20 rack units of space, 24" (61 cm, our product code RM070A), with 12 rack

units of space, and 47" (119.4 cm, our product code RM080A), with 25 rack units of space.

Some of the Swing-Out Rack’s other useful features:

• Can open to the left or right.

• 18" (45.7 cm) deep to accomodate even large devices.

• Made of 12-gauge steel to support up to 100 lb. (45.5 kg).

• Holes tapped 12-24 front and rear.

• Hole spacing complies with EIA-310-D.

• Wide key-hole spacing and 16" stud-mounting centers

so that one person can wallmount the Rack.

2. Introduction

CHAPTER 3: Assembly

To assemble the Swing-Out Rack, you’ll need a 3/8" socket or wrench and a level or carpenter’s

square. Once you have these ready, take these steps:

1. Lay the vertical fixed frame members on the ground, parallel to each other (see Figure 3-1

below). Leave enough space between them for the moldings you’ll be attaching in the next

step (see Figure 3-2 below).

Figure 3-1. Laying out the fixed frame members.

2. Attach the side moldings by aligning their bolt holes with those on the vertical fixed frame

members (see Figure 3-2 below); the pin guides—the holes where the swing frame’s release

pins will go—should be facing each other. Place the eight included hex bolts—four per

molding—in the bolt holes and tighten them.

Figure 3-2. Attaching the moldings.

3. Assembly

SWING-OUT RACK

3. Attach the swing frame by inserting its bottom release pins into the corresponding pin guides

(see Figure 3-3 below). While pulling down on the top release pins, slide the swing frame into

position. Make sure the top pins are also properly inserted in their corresponding pin guides.

Figure 3-3. Attaching the swing frame.

That’s all there is to it: Your Swing-Out Rack is now fully assembled. If you need to wallmount

the Rack, you can do so (see Section 4.1); otherwise, the Rack is ready for equipment installation

and operation.

a) Attach the

frame here

first

b) Pull down

the top

release pins

c) Lever the

frame into

place

CHAPTER 4: Installation and Use

4.1 Wallmounting the Rack

To mount the Swing-Out Rack on a wall, you will need to drive bolts (not included) through the

four main holes in the back corners of the vertical fixed frame members, shown in Figure 4-1

below. The left and right holes are 16" (40.6 cm) apart, so the Rack can be mounted on a pair

of studs.

Figure 4-1. The mounting holes on the back of the vertical fixed frame members.

4. Installation and Use

16"

323⁄4" (RM069A) or

2125⁄32" (RM070A) or

4117⁄32" (RM080A)

SWING-OUT RACK

4.2 Cabling the Rack

When you mount electronic hardware in the Swing-Out Rack, leave enough slack in the cables

to let the rack swing open, as shown in Figure 4-2 below.

Figure 4-2. Cable slack for the swing mechanism (top view of Rack shown).

You can secure cables to the Rack’s integrated cable-management tie slots with nylon ties

or Velcro®style straps, as shown in Figure 4-3 below.

Figure 4-3. Attaching ties or straps to the cable-management slots.

Velcro is a registered trademark of Velcro USA Inc.

CHAPTER 4: Installation and Use

4.3 Opening the Rack

To open the Swing-Out Rack, first make sure that the Rack’s release pins are secured in their pin

guides. (If either pin on the side you aren’t opening isn’t secure, the Rack’s swing frame could

come off when you try to open it.) Using both hands, gently move the pair of quick-release levers

at the top and bottom of either side of the Rack—one of these levers is shown in Figure 4-4 below—

toward each other to unlatch the swing frame, then pull the frame open as shown in Figure 4-5

below.

Figure 4-4. One of the quick-release levers (side view of Rack shown).

Figure 4-5. Using the levers to unlatch and open the swing frame.

SWING-OUT RACK

4.4 Closing the Rack

To close the Swing-Out Rack, use both hands to gently press the Rack’s free release pins in (toward

each other), or move the pair of quick-release levers at the top and bottom of either side of the

Rack toward each other, and swing the front of the Rack closed until it touches the Rack’s stopper

(shown in Figure 4-6 below). Then let go of the levers or the release pins and make sure the pins

go into their matching pin guides.

Figure 4-6. The Rack’s stopper (side view of Rack shown).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Black Box Support et étagère

Black Box

Black Box RM044 Manuel utilisateur

Black Box

Black Box Agility Manuel utilisateur

Black Box

Black Box RMS1924F Manuel utilisateur

Black Box

Black Box MicroRACK RM216 Manuel utilisateur

Black Box

Black Box RM050A-R3 Manuel utilisateur

Black Box

Black Box RM490A-R2 Manuel utilisateur

Black Box

Black Box RM110A Manuel utilisateur

Black Box

Black Box RM155A-R2 Manuel utilisateur

Black Box

Black Box RM140A-R2 Manuel utilisateur

Black Box

Black Box RM110A Manuel utilisateur

Black Box

Black Box RM970A Manuel utilisateur

Black Box

Black Box RM260 Manuel utilisateur

Black Box

Black Box RM220A Manuel utilisateur

Black Box

Black Box NetRack RM500A-R2 Manuel utilisateur

Black Box

Black Box RM7006 Manuel utilisateur

Black Box

Black Box WMD-24PMOUNT-U Manuel utilisateur

Black Box

Black Box RM202 Manuel utilisateur

Black Box

Black Box Elite Plus RM969A Manuel utilisateur

Black Box

Black Box EMD4000-RMK1 Manuel utilisateur

Black Box

Black Box RM427 Manuel utilisateur

Black Box

Black Box RM390A-R2 Manuel utilisateur

Black Box

Black Box RMK19K Manuel utilisateur

Black Box

Black Box RMT701 Manuel utilisateur

Black Box

Black Box ServCenter RF500A Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur