BIXOLON SPP-C200 Manuel d'instructions
Bluetooth Connection Manual
SPP-C200/C300
Mobile Printer
Ver. 1.00
http://www.bixolon.com
Ver. 1.00
- 2 -
Bluetooth Connection Manual
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the
manual
and any property of the product without the prior written approval of BIXOLON Co.,
Ltd.
The information contained herein is designed only for use with this BIXOLON product.
BIXOLON is not responsible for any direct or indirect damages, arising from or
related to use of this information.
• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
•All other brand or product names are trademarks of their respective companies or
organizations.
BIXOLON maintains ongoing efforts to enhance and upgrade the functions and
quality of all our products.
In the following, product specifications and/or user manual content may be changed
without prior notice.
Caution
Electronics, such as printers, are prone to damage by static electricity. Therefore, to
protect the printer from static electricity, be sure to turn off the printer before
connecting or disconnecting the cable to the rear of the printer. If the printer is
damaged by static electricity, contact your local dealer.
Ver. 1.00
- 3 -
Bluetooth Connection Manual
Table of Contents
1. Manual Information .............................................................................................. 4
2. Precaitions .............................................................................................................. 4
3. Bluetooth Information Print................................................................................. 5
4. Bluetooth Connection Instructions...................................................................... 6
4-1 iOS mode......................................................................................................................6
4-2 Android mode..............................................................................................................8
5. Troubleshooting................................................................................................... 10
Ver. 1.00
- 4 -
Bluetooth Connection Manual
1. Manual Information
This Bluetooth Connection Manual provides information on the connection of
Bluetooth-enabled iOS or Android Host devices with the printer.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual
content may be changed without prior notice.
2. Precaitions
1) To connect the printer with another device via Bluetooth, the devices must be
within 10m of one another. The connection is broken if the distance between
devices exceeds 10m.
2) The maximum separating distance may be shortened if transmission obstacles,
such as cement walls, are present.
3) If a device (such as a microwave oven, wireless LAN, etc.) that uses the same
Frequen cy is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least
5m.
Ver. 1.00
- 5 -
Bluetooth Connection Manual
3. Bluetooth Information Print
Turn the printer power off and close the printer paper cover.
Then press and hold both paper feed and power button simultaneously to turn on
the printer. After printing Self-Test begins, release the two buttons.
Power
FEED
Ver. 1.00
- 6 -
Bluetooth Connection Manual
4. Bluetooth Connection Instructions
This manual focuses on the use of the following Host devices.
For other Host devices, please refer to the relevant Host device manual.
4-1 iOS mode
1) Select the icon. 2) Select “Bluetooth”.
3) Select the printer to connect. 4) If it is displayed as below, enter "PIN"
(Default: 0000)
Ver. 1.00
- 7 -
Bluetooth Connection Manual
5) Select “Pair” 6) Bluetooth communication is available.
Ver. 1.00
- 8 -
Bluetooth Connection Manual
4-2 Android mode.
1) Select the icon. 2) Select “Bluetooth”.
3) Select the printer to connect. 4) If it is displayed as below, enter "PIN"
(Default: 0000)
Ver. 1.00
- 9 -
Bluetooth Connection Manual
5) Select “OK”. 6) Bluetooth communication is available.
Ver. 1.00
- 10 -
Bluetooth Connection Manual
5. Troubleshooting
1) Please follow the guide below if Bluetooth is not searched on iOS device.
(1) Check whether printer is connected to other Bluetooth device.
Printer is not able to be found on your iOS device if it is connected to other
bluetooth device. Check the printer's STATUS LED.
- STATUS LED on: When the printer is not connected to other devices via
Bluetooth
- STATUS LED blinks: When the printer is connected to another device via
Bluetooth
You need to disconnect the connection to other bluetooth device, or turn on the
printer.
* Printer is automatically connected to last iOS device which was connected.
Autres manuels pour SPP-C200
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels BIXOLON Imprimante
BIXOLON
BIXOLON SRP-S3000 Manuel utilisateur
BIXOLON
BIXOLON SRP-350plusV Manuel d'instructions
BIXOLON
BIXOLON STP-103 Manuel utilisateur
BIXOLON
BIXOLON SPP-A200 Manuel utilisateur
BIXOLON
BIXOLON SRP-E300ESK Manuel utilisateur
BIXOLON
BIXOLON SRP-350 PlusA Manuel utilisateur
BIXOLON
BIXOLON SPP-R410 Manuel utilisateur
BIXOLON
BIXOLON SRP-F310 Manuel utilisateur
BIXOLON
BIXOLON SRP-500 Instructions de montage
BIXOLON
BIXOLON SRP-275 Manuel utilisateur
BIXOLON
BIXOLON STP-103 Manuel utilisateur
BIXOLON
BIXOLON SRP-F310 Manuel utilisateur
BIXOLON
BIXOLON SPP-R200III Manuel utilisateur
BIXOLON
BIXOLON SRP-380 Manuel utilisateur
BIXOLON
BIXOLON XM7-20 Manuel d'instructions
BIXOLON
BIXOLON SRP-F310 Manuel utilisateur
BIXOLON
BIXOLON SRP-E300 Manuel d'instructions
BIXOLON
BIXOLON SPP-C200 Manuel utilisateur
BIXOLON
BIXOLON STP-103 Manuel d'installation et d'exploitation
BIXOLON
BIXOLON SRP-350plus Manuel d'installation et d'exploitation
