BIXOLON SLP-DV22 Manuel utilisateur

Setting up the Bixolon Printer

Remove Bixolon Printer from Shipping Box.

Connect Bixolon Printer to the Power Outlet

Bixolon Printer overview

PAUSE BUTTON

POWER SWITCH

FEED BUTTON

COVER LEVEL

Open the Paper Cover. Spread the Paper

Holder and insert Paper Roll. Labels should be

Facing Up.

Go to the next step

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 1.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 2.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

Button and LED Guide

PRINTER STATE BEFORE

OPERATION ACTION OPERATION PROCEDURE PRINTER OPERATION MODE

Power OFF

Apply Power while pressing the

button (Hold the button until the

printer starts self-test printing)

Self-test Printing Mode

PRESS

Print Standby Press the button softly and release

immediately

Feed Mode

PRESS

Print Standby Press the button for two seconds and

continue to hold

Stand-alone

Conﬁguration Mode

PRESS

During Printing Press the button for two seconds and

continue to hold

Print Cancel Mode

PRESS

During Printing Press the button softly and release it

immediately

Print Pause Mode

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 3.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

Button and LED Guide (cont.)

Print standby mode

Error mode.

Paper Jam (gap/black mark is

not recognized)

BLINK

Error mode.

Printer head overheating

BLINK

Error mode.

Paper cover open

BLINK

Error mode.

No paper

Error mode.

Media calibration

failure

Error mode.

Auto-Cutter error

Mode switching notiﬁcation.

BLINK Wait for input.

Print is paused temporarily

Wait for button input

BLINK

Wait for input.

Cover close mode.

Wait for button input

BLINK

Wait for input.

Print cancel mode

Wait for button input

BLINK

Select icon on your iPad home screen

PRECAUTIONS:

1. To connect the printer with your iPad via Bluetooth, the iPad and printer must be within 100 meters (330

feet) of one another. The connection is broken if the distance between devices exceeds 100 meters (330

feet).

2. The maximum separating distance may be shortened if transmission obstacles, such as cement walls,

are present.

3. If a device (such as a microwave oven, wireless LAN, ets.) that uses the same frequency is present, trans-

mission may be interrupted. Separate the printer and iPad from such interrupting devices by a distance of

at least 5 meters (16 feet).

Select “Bluetooth”

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 4.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

Bluetooth Connection

Select SLP-DX220B Printer to connect

Enter PIN - 0000. Click “Pair”

Bluetooth communication is available!

0000

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 5.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

Bluetooth Connection (Cont.)

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 6.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

Select SMS App from your iPad home screen Login to your SMS Account:

SPID: wendys

Click OK to allow Bluetooth Select Food Prep Module

Click Allow to accept Notiﬁcations In the bottom left corner, click Label Printer

selection button

Enable BlueTooth Printer in SMS

Select LABELS to print. Click “Select All”

button, then “Print Selected”.

Review your labels in the Print Review and

click Print.

Select Bixolon Printer Your Bixolon Printer is ready!

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 7.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

Enable BlueTooth Printer in SMS (cont.)

BIXOLON SLPDX220  MAINTENANCE

Printing quality might be degraded by dust, foreign substance, adhesive substance, or other pollution materials

stuck in the printer head or inside the printer.

When dirty, clean the print head as follows:

CAUTION:

Make sure to turn the printer power off prior to cleaning.

As the print head gets very hot during printing, if intending to clean the print head, turn the printer

power off and wait approximately 2~3 minute before commencement.

When cleaning the print head, take care not to touch the heated portion of the print head.

Printer Head is susceptible to damage from static electricity, etc.

Take care not to allow the print head to become scratched and/or damaged in any way.

Open the Paper Cover and then use the

cleaning pen to clean the head in the direction

from the center of the head to the edges.

After cleaning the head, do not use the printer

until the alcohol used for cleaning

evaporates completely (1~2 min) and the

printer has completely dried.

Perform the cleaning process each time the paper roll is replaced to

prevent print quality deterioration.

PIMMTM

Need assistance? Please call (858) 457-8160 or email pimmy@procuro.com 8.

PIMMTM Operations Tablet

PIMMTM

Bixolon SLP-DV220 Printer Setup

Table des matières

Autres manuels BIXOLON Imprimante

BIXOLON

BIXOLON SPP-R210 Manuel utilisateur

BIXOLON

BIXOLON STP-103II Manuel utilisateur

BIXOLON

BIXOLON SRP-350IIOBEi Manuel utilisateur

BIXOLON

BIXOLON SPP-R200III Manuel utilisateur

BIXOLON

BIXOLON STP-103III Manuel utilisateur

BIXOLON

BIXOLON BK3-31 Manuel utilisateur

BIXOLON

BIXOLON SRP-S3000 Manuel d'installation et d'exploitation

BIXOLON

BIXOLON BGT-100P Manuel utilisateur

BIXOLON

BIXOLON SPP-R200 Manuel utilisateur

BIXOLON

BIXOLON SRP-F310 Manuel utilisateur

BIXOLON

BIXOLON SRP-350plusII Manuel utilisateur

BIXOLON

BIXOLON SRP-Q200 Manuel utilisateur

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Instructions d'installation

BIXOLON

BIXOLON SRP-350plus Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SRP-E300 Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SRP-380 Manuel utilisateur

BIXOLON

BIXOLON SRP-330II Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SRP-S200 Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SPP-R300 Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SLP-DX220 Manuel utilisateur

BIXOLON

BIXOLON SRP-350IIOBEi Manuel utilisateur

BIXOLON

BIXOLON STP-103 Manuel utilisateur

BIXOLON

BIXOLON SRP-275 Manuel utilisateur

BIXOLON

BIXOLON SRP-150 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur