Biostar TFORCE 550 SE Guide de l'utilisateur

TForce 550 SE

BIOS Setup ................................................................................................ 1

1 Main Menu ............................................................................................. 3

2 Standard CMOS Features..................................................................... 7

3Advanced BIOS Features....................................................................... 9

4 Advanced Chipset Features................................................................. 16

5 Integrated Peripherals......................................................................... 18

6 Power Management Setup .................................................................. 24

7 PnP/PCI Configurations...................................................................... 28

8 PC Health Status .................................................................................. 31

9 Over Clock Navigator.......................................................................... 34

10 CMOS Reload Program (C.R.P.)...................................................... 43

TForce 550 SE

BIOS Setup

Introduction

The purpose of this manual is to describe the settings in the Award™ BIOS

Setup program on this motherboard. The Setup program allows users to modify

the basic system configuration and save these settings to CMOS RAM. The

power of CMOS RAM is supplied by a battery so that it retains the Setup

information when the power is turned off.

Basic Input-Output System (BIOS) determines what a computer can do without

accessing programs from a disk. This system controls most of the input and

output devices such as keyboard, mouse, serial ports and disk drives. BIOS

activates at the first stage of the booting process, loading and executing the

operating system. Some additional features, such as virus and password

protection or chipset fine-tuning options are also included in BIOS.

The rest of this manual will to guide you through the options and settings in

BIOS Setup.

Plug and Play Support

This AWARD BIOS supports the Plug and Play Version 1.0A specification and

ESCD (Extended System Configuration Data) write.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.

APM Support

This AWARD BIOS supports Version 1.1&1.2 of the Advanced Power

Management (APM) specification. Power management features are

implemented via the System Management Interrupt (SMI). Sleep and Suspend

power management modes are supported. Power to the hard disk drives and

video monitors can also be managed by this AWARD BIOS.

ACPI Support

Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power

interface specification (ACPI). It provides ASL code for power management

and device configuration capabilities as defined in the ACPI specification,

developed by Microsoft, Intel and Toshiba.

TForce 550 SE

PCI Bus Support

This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral

Component Interconnect) local bus specification.

DRAM Support

DDR SDRAM (Double Data Rate Synchronous DRAM) is supported.

Supported CPUs

This AWARD BIOS supports the AMD CPU.

Using Setup

Use the arrow keys to highlight items in most of the place, press <Enter> to

select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help

and press <Esc> to quit. The following table provides more detail about how to

navigate in the Setup program by using the keyboard.

Keystroke Function

Up arrow Move to previous item

Down arrow Move to next item

Left arrow Move to the item on the left (menu bar)

Right arrow Move to the item on the right (menu bar)

Move Enter Move to the item you desired

PgUp key Increase the numeric value or make changes

PgDn key Decrease the numeric value or make changes

+ Key Increase the numeric value or make changes

- Key Decrease the numeric value or make changes

Esc key Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu – Exit

Current page and return to Main Menu

F1 key General help on Setup navigation keys

F5 key Load previous values from CMOS

F7 key Load the optimized defaults

F10 key Save all the CMOS changes and exit

TForce 550 SE

1 Main Menu

Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will

appear on the screen. The Main Menu allows you to select from several setup

functions. Use the arrow keys to select among the items and press <Enter> to

accept and enter the sub-menu.

Figure 1: Main Menu

Standard CMOS Features

This submenu contains industry standard configurable options.

Advanced BIOS Features

This submenu allows you to configure advanced features of the BIOS.

!! WARNING !!

For better system performance, the BIOS firmware is being

continuously updated. The BIOS information described in

this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your

reference only. The actual BIOS information and settings on

board may be slightly different from this manual.

TForce 550 SE

Advanced Chipset Features

This submenu allows you to configure special chipset features.

Integrated Peripherals

This submenu allows you to configure certain IDE hard drive options and

Programmed Input/ Output features.

Power Management Setup

This submenu allows you to configure the power management features.

PnP/PCI Configurations

This submenu allows you to configure certain “Plug and Play” and PCI options.

PC Health Status

This submenu allows you to monitor the hardware of your system.

OverClock Navigator Engine (O.N.E.)

ONE provides two powerful overclock engines, MOS & AOS for both

overclock expertise and beginner.

CMOS Reload Program (C.R.P.)

The CMOS Reload Program (CRP) allows you to save different CMOS settings

into BIOS-ROM.

Load Optimized Defaults

This selection allows you to reload the BIOS when problem occurs during

system booting sequence. These configurations are factory settings optimized

for this system. A confirmation message will be displayed before defaults are

set.

TForce 550 SE

Set Supervisor Password

Setting the supervisor password will prohibit everyone except the supervisor

from making changes using the CMOS Setup Utility. You will be prompted with

to enter a password.

Set User Password

If the Supervisor Password is not set, then the User Password will function in

the same way as the Supervisor Password. If the Supervisor Password is set and

the User Password is set, the “User” will only be able to view configurations but

will not be able to change them.

Save & Exit Setup

Save all configuration changes to CMOS (memory) and exit setup. Confirmation

message will be displayed before proceeding.

Exit Without Saving

Abandon all changes made during the current session and exit setup.

Confirmation message will be displayed before proceeding.

TForce 550 SE

Integrate Flashing Program

This is a very safe way to upgrade BIOS.

By pressing “Enter” key for three times, and the upgrading process will be

completed easily.

TForce 550 SE

2 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into several categories.

Each category includes no, one or more than one setup items. Use the arrow

keys to highlight the item and then use the<PgUp> or <PgDn> keys to select the

value you want in each item.

Figure 2: Standard CMOS Setup

Main Menu Selections

This table shows the items and the available options on the Main Menu.

Item Options Description

Date mm : dd : yy

Set the system date. Note

that the ‘Day’ automatically

changes when you set the

date.

Time hh : mm : ss Set the system internal

clock.

IDE Channel 0 Master Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options

IDE Channel 0 Slave Options are in its sub

menu.

Press <Enter> to enter the

sub menu of detailed

options.

Drive A 360K, 5.25 in

1.2M, 5.25 in

Select the type of floppy

disk drive installed in your

system.

TForce 550 SE

Item Options Description

720K, 3.5 in

1.44M, 3.5 in

2.88M, 3.5 in

None

Halt On

All Errors

No Errors

All, but Keyboard

All, but Diskette

All, but Disk/ Key

Select the situation in which

you want the BIOS to stop

the POST process and

notify you.

Base Memory N/A

Displays the amount of

conventional memory

detected during boot up.

Extended Memory N/A

Displays the amount of

extended memory detected

during boot up.

Total Memory N/A Displays the total memory

available in the system.

TForce 550 SE

3Advanced BIOS Features

Figure 3: Advanced BIOS Setup

Cache Setup

Autres manuels pour TFORCE 550 SE

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Biostar Carte mère

Biostar

Biostar TA75M Guide de l'utilisateur

Biostar

Biostar H61IL Manuel utilisateur

Biostar

Biostar TA870 - BIOS Manuel utilisateur

Biostar

Biostar TA780G M2 HP PLUS - BIOS Guide de l'utilisateur

Biostar

Biostar MCP6P M2 PLUS Guide de l'utilisateur

Biostar

Biostar M7VIW Guide de l'utilisateur

Biostar

Biostar M7SXF Manuel utilisateur

Biostar

Biostar 945P-A7A Mise à jour du firmware

Biostar

Biostar A55MH Guide de l'utilisateur

Biostar

Biostar IDEQ 200P Manuel utilisateur

Biostar

Biostar M5ATA Manuel utilisateur

Biostar

Biostar M6VBA Manuel utilisateur

Biostar

Biostar A75MH Guide de l'utilisateur

Biostar

Biostar M5VIA Manuel utilisateur

Biostar

Biostar M7VIG400 Manuel utilisateur

Biostar

Biostar M7 SUA Manuel utilisateur

Biostar

Biostar TZ68K Guide de l'utilisateur

Biostar

Biostar A55MLV Guide de l'utilisateur

Biostar

Biostar Hi-Fi A88S2 Manuel utilisateur

Biostar

Biostar TA970 Guide de l'utilisateur

Biostar

Biostar GF8100 M2+ TE Guide de l'utilisateur

Biostar

Biostar GF8100M2TE Manuel utilisateur

Biostar

Biostar M6TWC Manuel utilisateur

Biostar

Biostar G41D3 Guide de l'utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur