Biostar NF560 A2G+ Guide de l'utilisateur
NF560 A2G+/NF520 A2G+ Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Table of Contents
Chapter 1: Introduction .......................................................... 1
1.1 Before You Start ................................................................................1
1.2 Package Checklist.............................................................................1
1.3 Motherboard Features......................................................................2
1.4 Rear Panel Connectors (for Ver 5.x)...............................................4
1.5 Rear Panel Connectors (for Ver 6.x)...............................................4
1.6 Motherboard Layout ........................................................................5
Chapter 2: Hardware Installation ........................................... 6
2.1 Installing Central Processing Unit (CPU).......................................6
2.2 FAN Headers......................................................................................8
2.3 Installing System Memory ................................................................9
2.4 Connectors and Slots .......................................................................11
Chapter 3: Headers & Jumpers Setup ................................... 13
3.1 How to Setup Jumpers ....................................................................13
3.2 Detail Settings..................................................................................13
Chapter 4: NVIDIA RAID Functions....................................... 19
4.1 Operation System............................................................................19
4.2 Raid Arrays ......................................................................................19
4.3 How RAID Works.............................................................................19
Chapter 5: Useful Help .......................................................... 23
5.1 Driver Installation Note .................................................................23
5.2 Award BIOS Beep Code ..................................................................24
5.3 Extra Information ...........................................................................24
5.4 Troubleshooting...............................................................................25
Appendencies: SPEC In Other Language ............................... 26
German .................................................................................................................26
France....................................................................................................................28
Italian ....................................................................................................................30
Spanish ..................................................................................................................32
Portuguese............................................................................................................34
Polish .....................................................................................................................36
Russian ..................................................................................................................38
Arabic ....................................................................................................................40
Japanese................................................................................................................42
NF560 A2G+/NF520 A2G+
1
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
1.2 PACKAGE CHECKLIST
HDD Cable X 1
Serial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Note: The package contents may differ by area or your motherboard version.
Motherboard Manual
2
1.3 MOTHERBOARD FEATURES
NF560 A2G+ NF520 A2G+
CPU
Socket AM2 / AM2+
AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 /
Sempron / AM2+ processors
AMD 64 Architecture enables 32 and 64 bit
computing
Supports Hyper Transport and Cool=n=Quiet
Socket AM2 / AM2+
AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 /
Sempron / AM2+ processors
AMD 64 Architecture enables 32 and 64 bit
computing
Supports Hyper Transport and Cool=n=Quiet
FSB Support HyperTransport
Supports up to 1GHz Bandwidth
Support HyperTransport
Supports up to 1GHz Bandwidth
Chipset nVIDIA nForce 560 nVIDIA nForce 520
Super I/O
ITE 8716F
Provides the most commonly used legacy Super
I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
ITE 8716F
Provides the most commonly used legacy Super
I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
Main
Memory
DDR2 DIMM Slot x 4
Each DIMM supports 256/512/1024/2048 MB
DDR2
Max Memory Capicity 8G
Dual Channel Mode DDR2 memory module
Supports DDR2 533/667/800
Registered DIMM and ECC DIMM is not
supported
DDR2 DIMM Slot x 4
Each DIMM supports 256/512/1024/2048 MB
DDR2
Max Memory Capicity 8G
Dual Channel Mode DDR2 memory module
Supports DDR2 533/667/800
Registered DIMM and ECC DIMM is not
supported
IDE
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
SATA
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant.
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant.
LAN
Realtek RTL8111C / RTL8102E (optional)
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for Realtek RTL8111C only)
Half / Full duplex capability
Realtek RTL8111C / RTL8102E (optional)
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for Realtek RTL8111C only)
Half / Full duplex capability
NF560 A2G+/NF520 A2G+
3
NF560 A2G+ NF520 A2G+
Sound
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
7.1 channels audio out (ALC888)
5.1 channels audio out (ALC662)
Supports HD Audio
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
7.1 channels audio out (ALC888)
5.1 channels audio out (ALC662)
Supports HD Audio
PCI slot x3 PCI slot x3
PCI Express x16 slot x1 PCI Express x16 slot x1
Slots
PCI Express x 1 slot x2 PCI Express x 1 slot x2
Floppy Connector x1 Floppy Connector x1
Printer Port Connector x1 Printer Port Connector x1
IDE Connector x1 IDE Connector x1
SATA Connector x4 SATA Connector x4
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
CD-in Connector x1 CD-in Connector x1
S/PDIF out Connector x1 S/PDIF out Connector x1
CPU Fan Header x1 CPU Fan Header x1
System Fan Header x1 System Fan Header x1
USB Connector x3 USB Connector x3
CMOS clear Header x1 CMOS clear Header x1
Power Connector (24pin) x1 Power Connector (24pin) x1
On Board
Connector
Power Connector (4pin) x1 Power Connector (4pin) x1
Back Panel
I/O
PS/2 Keyboard x1
PS/2 Mouse x1
Serial Port x1
LAN port x1
USB Port x4
Audio Jack (Ver 5.x) x6
Audio Jack (Ver 6.x) x3
PS/2 Keyboard x1
PS/2 Mouse x1
Serial Port x1
LAN port x1
USB Port x4
Audio Jack (Ver 5.x) x6
Audio Jack (Ver 6.x) x3
Board Size 200 mm (W) x 293 mm (L) 200 mm (W) x 293 mm (L)
Special
Feature RAID 0 / 1 / 0+1 / 5 support RAID 0 / 1 / 0+1 support
OS Support
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS with or without notice.
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS with or without notice.
Motherboard Manual
4
1.4 REAR PANEL CONNECTORS (FOR VER 5.X)
PS/2
Mouse
PS/2
Keyboard
COM1 USBX2USBX2
LAN
Line In
Line Out
Mic In
Center
Rear
Side
1.5 REAR PANEL CONNECTORS (FOR VER 6.X)
PS/2
Mouse
PS/2
Keyboard
COM1 USBX2USBX2
LAN Line In/
Surround
Line Out
Mic In 1/
Bass/ Center
NF560 A2G+/NF520 A2G+
5
1.6 MOTHERBOARD LAYOUT
JKBMS1
JUSB1
JUSBLAN1
PEX1_2
PEX16_1
PCI2
FDD1
BAT1
JCOM1
Codec
PCI3
DIMMA1
DIMMB1
DIMMB2
DIMMA2
Socket A M2
Super I/O
PEX1_1
PCI1
LAN
JATXPWR2
JCFAN1
JPRNT1
JATXPWR1
JUSB2 JUSB3 JUSB4
JCMOS1
JSFAN1 JPANEL1
JSPDIF_OUT1
JCDIN1
SATA1 SATA2
IDE1
JAUDIO2
(for Ver 5.x)
JAUDIO1
(for Ver 6.x)
JAUDIOF1 nForce
520 / 560
SATA3 SATA4
BIOS
Note: represents the 1■st pin.
Motherboard Manual
6
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Remove the socket protection cap.
Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point forwards this white triangle. The CPU will fit
only in the correct orientation.
NF560 A2G+/NF520 A2G+
7
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
Note: Please update the BIOS to the latest version while using AM2+ CPUs. Due to the latest CPU
transition, you may encounter the situation that the new system failed to boot while using new
AM2+ CPUs. In this case, please install one standard AM2 CPU to boot your system, and
update the latest BIOS from our website for AM2+ CPUs support.
Motherboard Manual
8
2.2 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Header
Pin
Assignment
1 Ground
2 +12V
3FANRPM
rate sense
14
4Smart Fan
Control
JSFAN1: System Fan Header
Pin
Assignment
1 Ground
2 +12V
13
3 FAN RPM rate
sense
Note:
The JCFAN1 supports 4-pin head connector, and JSFAN1supports 3-pin head connector.
When connecting with wires onto connectors, please note that the red wire is the positive
and should be connected to pin#2, and the black wire is Ground and should be
connected to GND.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Biostar Carte mère
Biostar
Biostar TA790GXB A2 PLUS - BIOS Manuel utilisateur
Biostar
Biostar TForce4 U AM2 Manuel utilisateur
Biostar
Biostar B650MP-E PRO Manuel utilisateur
Biostar
Biostar TA770E - BIOS Guide de l'utilisateur
Biostar
Biostar K8NHA Grand Manuel
Biostar
Biostar VIOTECH 3200 Guide de l'utilisateur
Biostar
Biostar TB150 PRO Manuel utilisateur
Biostar
Biostar X470NH Manuel utilisateur
Biostar
Biostar A75MH Guide de l'utilisateur
Biostar
Biostar M6VLR Manuel utilisateur
Biostar
Biostar NF4UL-A9 Guide de l'utilisateur
Biostar
Biostar P4 TSP-D2 Manuel utilisateur
Biostar
Biostar P4 VTB Manuel utilisateur
Biostar
Biostar M6VCT Manuel utilisateur
Biostar
Biostar G41D-M7 Guide de l'utilisateur
Biostar
Biostar M7VIZ Guide de l'utilisateur
Biostar
Biostar U8798 Manuel utilisateur
Biostar
Biostar P4M80-M4 Manuel utilisateur
Biostar
Biostar TH67 Guide de l'utilisateur
Biostar
Biostar P4M80-M7 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
