Biostar I915G-M7 Manuel utilisateur

I915G-M7

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction.....................................................1

1.1 Motherboard Features.......................................................1

1.2 Package Checklist.............................................................4

1.3 Motherboard Layout..........................................................5

1.4 Motherboard Components ................................................6

Chapter 2: Hardware Installation.....................................7

2.1 Central Processing Unit (CPU) .........................................7

2.2 FAN Headers.....................................................................8

2.3 Memory Module Installation ..............................................9

2.4 Connectors and Slots......................................................10

Chapter 3: Headers & Jumpers Setup........................... 11

3.1 How to Setup Jumpers....................................................11

3.2 Detail Settings.................................................................11

Chapter 4: Useful Help....................................................15

4.1 Award BIOS Beep Code .................................................15

4.2 Extra Information.............................................................15

4.3 Troubleshooting...............................................................17

Chapter 5: WarpSpeeder™.............................................18

5.1 Introduction......................................................................18

5.2 System Requirement.......................................................18

5.3 Installation.......................................................................19

5.4 [WarpSpeeder™] includes 1 tray icon and 5 panels.......20

I915G-M7

CHAPTER 1: INTRODUCTION

1.1 MOTHERBOARD FEATURES

A. Hardware

CPU

Supports single Pentium 4 processor LGA 775 package.

Intel Platform Compatibility Guide

Front side bus at the following frequency ranges:

- 533 MT/s (133 MHz Core Clock)

- 800 MT/s (200 MHz Core Clock)

Supports Hyper-Threading Technology.

Chipset

North Bridge: Intel 915G.

South Bridge: Intel ICH6.

Dimensions

Micro ATX Form Factor: 24.45cm (W) x 24.40cm (L)

Main Memory

Supports DDR-333/400

Supports 256-Mb, 512-Mb, or 1G-Mb DDR technologies for x8

and x16 non-ECC DDR devices.

Maximum DRAM space is up to 4GB (assuming 32-bit

addressing.)

Support for non-ECC memory only.

Registered DIMMs not supported.

DIMM Socket Location DDR Module Total Memory Size

DDRA1 256MB/512MB/1GB *1

DDRA2 256MB/512MB/1GB *1

DDRB1 256MB/512MB/1GB *1

DDRB2 256MB/512MB/1GB *1

Max is 4GB.

On Board IDE

Supports 1 IDE disk drive.

Supports PIO Mode 5, Bride Mode and Ultra DMA 33/66/100

Bus Master Mode.

I915G-M7

Serial ATA

Controller integrated in ICH6.

Supports 4 Serial ATA (SATA) ports.

- Intel Advanced Host Controller (AHCI).

Compliant with SATA 1.0 specification

Data transfer rates up to 1.5Gb/s

Slots

2 * 32-bit PCI bus master slots.

1 * PCI-Express x 1 slots.

- Bandwidth 250MB/s per direction; 500MB/s Totally

- PCI Express supports a raw bit-rate of 2.5Gb/s on the data

pins.

- 2 times bandwidth over the traditional PCI architecture.

1 * PCI-Express x 16 slot.

- Maximum theoretical realized bandwidth of 4GB/s

simultaneously per direction, for an aggregate of 8GB/s

totally.

Super I/O

Chip: ITE IT8712.

Low Pin Count Interface.

Provides the most commonly used legacy Super I/O

functionality.

Environment Control initiatives,

- H/W Monitor

- Fan Speed Controller

- ITE's "Smart Guardian" function

On Board AC’97 Sound Codec

Chip: ALC655

Support 6 channels.

Supports S/PDIF-Out and S/PDIF-In functions (optional).

Compliant with AC’97 Version 2.3 specification.

LAN

Chip: RTL8100C.

Supports 10/100Mb/s auto-negotiation.

Half/Full duplex capability.

Supports ACPI power management

I915G-M7

Front Side On-board Peripherals

1 IDE connectors support 2 hard disk devices.

1 front panel header supports front panel facilities.

1 CD-in connector supports 1 CD-ROM audio-in device.

1 front audio header supports front panel audio function.

1 S/PDIF-In connector supports digital audio-in function

(optional).

1 S/PDIF-Out connector supports digital audio-out function

(optional).

1 chassis open header supports PC case-opened warning

function.

1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M

and 2.88Mbytes.

4 serial ATA connectors support 4 SATA devices.

2 USB headers support 4 USB 2.0 ports at front panel.

Rear Side Connectors

4 USB 2.0 ports.

1 VGA port.

1 serial port.

1 parallel port.

1 RJ-45 LAN jack.

1 PS/2 Mouse & Keyboard port.

1 vertical audio port including 1 line-in connector, 1 line-out

connector, and 1 MIC-in connector.

PS/2

Keyboard

PS/2

Mouse

LAN

Line In/

Surround

Line Out

Mic In 1/

Base/Center

USB x2

COM1

Parallel

VGA1

JCOM1 JVGA1

USB x2

I915G-M7

B. BIOS & Software

BIOS

Award legal BIOS.

Supports APM1.2.

Supports ACPI.

Supports USB Function.

Software

Supports Warpspeeder™, 9th Touch™, WINFLASHER™ and

FLASHER™.

Offers the highest performance for Windows 98 SE, Windows

2000, Windows Me, Windows XP, SCO UNIX etc.

1.2 PACKAGE CHECKLIST

FDD Cable * 1

HDD Cable * 1

User’s Manual * 1

Fully Setup Driver CD * 1

Rear I/O Panel for ATX Case * 1

S/PDIF Cable * 1 (optional)

USB 2.0 Cable *1 (optional)

Serial ATA Cable * 1 (optional)

Serial ATA Power Switch Cable * 1 (optional)

I915G-M7

1.3 MOTHERBOARD LAYOUT

JRJ45USB1

JKBV1

JUSBV1

JPANEL1

BAT1

DDRA1

DDRA2

DDRB1

DDRB2

IDE1

JATXPWR1

BIOS

JCFAN1

JATXPWR2

JAUDIO1

13 14

JAUDIO2

PCI-EX16

PCI2

Super

I/O

JCL1

JCMOS1

SATA1

SATA3

SATA2

SATA4

Codec

JCDIN1

JSPDIF_OUT1

(optional)

JSPDIF_IN1

(optional)

PCI-EX1_1

JSFAN1

JPRNT1

JCOM1

JVGA1

JKBMS1

Intel 915G

ICH6

PCI1

LAN

LGA775

CPU1

FDD1

Note: ●represents the 1st pin.

I915G-M7

1.4 MOTHERBOARD COMPONENTS

BAT1

BIOS

Super

I/O

Codec

Intel 915G

ICH6

LAN

LGA775

CPU1

A. JATXPWR1: ATX power source

connector. M. JUSBV3_1: power source header for

JUSB3/JUSB4.

B. JUSBV1: power source header for

JUSB2 & JRJ45USB1. N. JUSB3/JUSB4: front USB headers.

C. JATXPWR2: ATX power source

connector. O. JCMOS1: Clear CMOS header.

D. JKBV1: power source header for

JKBMS1. P. JCL1: chassis open header.

E. Rear side (back panel) connectors. Q. JPANEL1: front panel facilities header.

F JAUDIO2: Front panel audio header. R. JSFAN1: power header for system fan.

G. PCI-EX16: PCI Express x 16 slot. S. SATA1~SATA4: on-board serial ATA

connectors.

H. JCDIN1: CD-ROM audio-in

connector. T. IDE1: Hard Disk connector.

I. PCI-EX1_1: PCI-Express x 1 slot. U. DDR

1/DDRA2/DDRB1/DDRB2: DDR

memory modules.

J. PCI1/PCI2: Peripheral Component

Interconnect lots. V. FDD1: Floppy Disk connector.

K. JSPDIF_OUT1 (optional): Digital

audio-out connector. W. JCFAN1: power header for CPU fan.

L. JSPDIF_IN1 (optional): Digital

audio-in connector.

I915G-M7

CHAPTER 2: HARDWARE INSTALLATION

2.1 CENTRAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation for future use.

When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin

legs won’t be damaged.

pin cap

Step 1: Pull the lever sideways away from the socket and then raise the

lever up to a 90-degree angle.

Step 2: Look for the black cut edge on socket, and the white dot on CPU

should point wards this black cut edge. The CPU will fit only in the

correct orientation.

Step 2-1:

I915G-M7

Step 2-2:

Step 3: Hold the CPU down firmly, and then close the lever to complete

the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN

power cable to the JCFAN1. This completes the installation.

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

wiring and plug may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

CPU FAN Header: JCFAN1

Pin Assignment

1 Ground

2 Power

3 FAN RPM rate sense

JCFAN1 4 Smart Fan Control

System Fan Header: JSFAN1

Pin Assignment

1 Ground

2 +12V

JSFAN1 3 FAN RPM rate sense

Note:

The JCFAN1 and JSFAN1 support 4-pin and 3-pin head connector.

When connecting with wires onto connectors, please note that the red

wire is the positive and should be connected to pin#2, and the black

wire is Ground and should be connected to GND.

Autres manuels pour I915G-M7

Table des matières

Autres manuels Biostar Carte mère

Biostar

Biostar P4 TDQ Guide de l'utilisateur

Biostar

Biostar P31-A7 Guide de l'utilisateur

Biostar

Biostar U8868 Guide de l'utilisateur

Biostar

Biostar M7 VIQ Manuel utilisateur

Biostar

Biostar H77MU3 Guide de l'utilisateur

Biostar

Biostar P35D2-A7 Guide de l'utilisateur

Biostar

Biostar MCP6P-M2 Manuel utilisateur

Biostar

Biostar U8568 Guide de l'utilisateur

Biostar

Biostar M5VNB Manuel utilisateur

Biostar

Biostar K8M800 MICRO AM2 Guide de l'utilisateur

Biostar

Biostar Z490GTN Manuel utilisateur

Biostar

Biostar B760MX-E D4 Manuel utilisateur

Biostar

Biostar Z590 VALKYRIE Manuel utilisateur

Biostar

Biostar TForce4U-775 Manuel utilisateur

Biostar

Biostar GF8100M2TE Manuel utilisateur

Biostar

Biostar K8NBP Manuel utilisateur

Biostar

Biostar B660MXC PRO Manuel utilisateur

Biostar

Biostar U8668 Pro Manuel utilisateur

Biostar

Biostar M7 VKG Manuel utilisateur

Biostar

Biostar M7NCG Manuel utilisateur

Biostar

Biostar I945G-M7 Manuel utilisateur

Biostar

Biostar I91PL-A7 PCI-ED Manuel utilisateur

Biostar

Biostar P4M890-M7 TE Guide de l'utilisateur

Biostar

Biostar 945P-A7A Guide de l'utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur