Biochef Atlas Caractéristiques techniques
Atlas
Power Blender
USER MANUAL AND RECIPES
ENGLISH 3
EN
FRANÇAIS 17
FR
DEUTSCH 33
DE
ESPAÑOL 49
ES
ITALIANO 65
IT
The information in this manual is intended
to help you to get the best results from your
BioChef Atlas Power Blender.
Please read and follow these instructions
and safeguards prior to use.
Please keep your manual handy for future
reference, warranty information and support details
4
Safety Precautions
! Read all instructions.
! To protect against risk of electrical shock, do not put the body (motor) in
water or any other liquid .
! Close supervision is necessary when any appliance is used by children.
! Unplug from electrical outlet when not in use and before disassembly
for cleaning.
! Avoid contact with moving parts.
! Do not let cord hang over edge of counter.
! Keep hands and utensils out of the jug container. A rubber scraper or
spatula may be used but only when the blender is not running.
! Always operate with the lid rmly in place.
! If in the event the motor overheats, the temperature monitoring system
will trigger and the motor will stop. Switch o and unplug the appliance
and let the motor cool down. The motor temperature monitoring system
resets after the blender is unplugged from wall socket for 45 minutes.
! Blades are sharp. Use caution when handling the blade. Do not attempt
to disassemble blade and blade assembly.
! To prevent overheating, never allow the blender to run for more than ve
minutes at a time, as it can cause permanent damage to the motor.
EN
5
Parts and Accessories
1
2
3
5
1 Jug lid and vented lid plug
2 2 litre BPA-free Tritan™ jug
3 Japanese stainless steel blades
4 16 pre-set programmes
5 Brushless 1000W motor
6 Tamper
6
4
EN
6
Operating Instructions
STANDBY MODE
Place the jug onto the blender base and plug in the power cord and the
indicator button will light. This means the blender is turned on and ready to use.
ACTIVATED MODE
To activate the blender from Standby mode, press the power button once and
the LED will display 0:00. This means you can select your desired function
button to operate the blender; Touch the power button once again and the
blender will enter Standby Mode again.
OPERATING MODE
In the activated mode, press your desired function button and the LED will
display the time of the chosen function and the countdown to zero. It’s best
to use one hand to hold the handle of the jug while commencing a function,
particularly when blending nuts or harder ingredients.
DISPLAY SCREEN
Time Display. For example, 10:00 means 10 minutes, 0:35 means 35s and 1:06
means 1 minute and 6s.
Display “PULS” means Pulse, “PAUS” means Pause and “ERR” means Error.
Display 0:00 means the blender is activated or the operating function is over.
BLENDER FUNCTIONS
The blender has a total of 16 functions / buttons.
• On/O
• Pulse
• 8 variable speed settings
• 5 preset functions – smoothie, ice cream, vegetable and fruit, nuts, soup.
• +20 sec time button
All functions (except the Pulse Button) will sound 5 beeps after the operation
has nished.
EN
7
The operating time and speed of the 5 automatic functions are preset. During
operation, the speed can not be adjusted but you can increase the time by
pressing the “+20” button.
Pulse Button
The pulse function can only be started when you press it TWICE once
the blender is activated. The rst press is to activate this button. Once it is
activated, the On/O light will ash and pulse light will be bright. At the same
time, the light will go out and the display screen will show “PULS”. The second
press will let it operate and the screen will show the operating time which
starts from 0:00. For example, the operating time is 3s, when it stops, the
screen will show 0:03. Once the function is over, all the lights will be bright
except the On/O button light and the screen will show 0:00.
The actual operating time of the PULSE is determined by how long you ‘press’
the pulse button.
Only use this button for shorter bursts of blending. For longer blending
requirements, select a function or the 1 minute variable speed settings.
8 Variable Speed Settings
Increase the speed from left to right and decrease the speed from right to
left. There are 8 speeds and the preset operating time for each speed is 1
minute. For your desired texture, heat (soups) or blending preferences, you
can choose to nish after the 1 minute or increase blending time with the +20
button.
During operation, you can adjust the speed by touching the buttons one by
one or sliding directly. Under the manual setting mode, please make sure
the blender runs on low speed for 5 seconds and then increase the speed
gradually.
The speeds for the automatic functions are preset which means this manual
speed setting function can not be used together with an automatic one.
Automatic Function Buttons
SMOOTHIE BUTTON
This function button is designed for making delicious smoothies. The
operating speed and time have already been preset to make the best
smoothie. The preset time is 1 minute. If you are using more than 400g of ice,
it’s a good idea to use the tamper.
EN
8
ICE CREAM BUTTON
This function button is designed for making ice cream. The operating speed
and time have already been preset at 1 minute and 30s. If the ingredients
weigh more than 300g, use the tamper to assist in the blending process.
VEGETABLE AND FRUIT BUTTON
This function button is designed for making vegetable and fruit smoothies.
The preset time is 1 minute and 30s.
SOUP BUTTON
This function button is designed for making a variety of soups. This preset
time is 8 minutes.
NUT AND GRAIN BUTTON
This function button is designed for grinding all kinds of nuts, seeds, grains
and hard food. The operating speed and time have already been preset
for 35s. Alternatively, you can manually adjust the speed from low to high
depending on the ingredients.
SPECIAL TIPS
• The above 5 functions are automatic functions.
• You can choose to increase the time according to the food quantity and
desired results.
• If you want to suspend the operating function, you can press this function
button again and the display screen will show “PAUS” which means it
has been paused / suspended. And after that, the screen will display the
remaining time and “PAUS” alternately. You can add other ingredients
during this suspended period. If you want to restart it, simply touch this
button again and the “PAUS” will disappear and the blender will continue to
operate for the remaining time.
• If you want to stop the operating function, you can directly press the On/O
button.
Time Setting +20s
Each press means the operating time will be increased by 20s. The upper limit
for this function is 10 minutes.
The operating time for all the functions except PULSE can be increased once
it begins operation. Under the activated mode, only pressing this button once
means the blender will operate in “Speed H” for 20s.
EN
9
This function can be used together with any other function except the “Pulse”.
For automatic functions, the operating speed for the increased time is the
same with the preset nal speed for this function. For example, the preset
time for the Smoothie function is 1 minute and the increased time is 20s.
Troubleshooting
When the jug
is on the base
and the control
panel does not
light up.
1. Not plugged into electricity. Replug cord into
power outlet.
2. Electricity not turned on. Check switch is turned to
ON position.
Motor stops
suddenly
during
operation.
1. Too much food may cause motor to cut out. Turn
o. Remove some of the food and power up
again.
2. Long durations of operating or adding too much
hard food may trigger the protection mechanism,
causing the motor to stop. Rest the blender for
20 – 45 minutes and restart it.
Displays ‘ERR’ 1. Voltage shortage. The power voltage is
unmatched or insucient for the blender. Make
sure the power supply is correct.
2. Adding too much food takes the working current
beyond the preset maximum. Rest the blender for
20 – 45 minutes and restart it.
3. Accidentally pressing two buttons at the same
time. Press power ON/ OFF button and restart
blender.
EN
10
View our complete recipe collection online
www.biochefkitchen.com/recipes
Cleaning
After you nish your blending session, you can clean the jug in various ways
depending on the ingredients you have used.
You can rinse the jug and lid directly under the tap and use a clean cloth to
wipe up the residual water.
Always place jug in upright position when leaving to dry. Try not to have liquid
contacting the underside of the drive shaft.
Thick or oily residue
• Pour warm water with a few drops of dish washing liquid and select the
pulse button. Repeat until most of the residue has been removed from
around the blade assembly and jug sides.
• Rinse the jug and lid under the tap directly and wipe up the residual water
with a dry cloth.
• Wipe the base with a clean and soft cloth. Please make sure the blender is
unplugged before cleaning!
EN
Autres manuels pour Atlas
1
Table des matières
Autres manuels Biochef Mixer
Biochef
Biochef Living Food Caractéristiques techniques
Biochef
Biochef AirFree Caractéristiques techniques
Biochef
Biochef Aurora Caractéristiques techniques
Biochef
Biochef High Performance Caractéristiques techniques
Biochef
Biochef Astro Vacuum Blender Guide rapide
Biochef
Biochef BCB-1000 Manuel utilisateur
Biochef
Biochef Astro Vacuum Guide rapide
Biochef
Biochef Nova Caractéristiques techniques
Biochef
Biochef Astro Caractéristiques techniques
Biochef
Biochef Galaxy Manuel utilisateur
