Billion BiPAC 5100S Manuel utilisateur

BIPAC-5100S

ADSL Modem/Router

with Single Ethernet Port

Quick Start Guide

Billion BIPAC-5100S ADSL Modem/Router

Package Contents

BIPAC-5100S ADSL Modem/Router

CD-ROM containing the online manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

AC-AC power adapter (9VAC, 1A)

This Quick Start Guide

 Do not use the BIPAC-5100S in high humidity or high

temperatures.

 Do not use the same power source for the BIPAC-5100S as

other equipment.

 Do not open or repair the case yourself. If the BIPAC-5100S is

too hot, turn off the power immediately and have it repaired at a

qualified service center.

 Avoid using this product and all accessories outdoors.

Warning

 Place the BIPAC-5100S on a stable surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

ttention

For more detailed instructions on configuring and using

the ADSL Modem/Router, please refer to the on-line

manual.

Quick Start Guide

The Front LEDs

LED Meaning

1 PPP : Lit steady when there is a PPPoA / PPPoE connection.

2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”).

3 LAN Port :

Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

4 SYS : Lit when the system is ready.

5 PWR : Lit when power is ON.

5 41

3 2

Billion BIPAC-5100S ADSL Modem/Router

The Rear Ports

Port Meaning

1 POWER Connect the supplied power adapter to this jack.

2 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

3 LAN Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the LAN ports

when connecting to a PC or an office/home network of 10Mbps or

100Mbps.

4 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

Quick Start Guide

Connecting Your ADSL Router

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.

Billion BIPAC-5100S ADSL Modem/Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the Control

Panel, double-click on Network and Dial-up

Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Billion BIPAC-5100S ADSL Modem/Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Protocols tab.

2. Select TCP/IP Protocol and click

Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Autres manuels pour BiPAC 5100S

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Billion Routeur réseau

Billion

Billion BiPAC 7404V series Manuel utilisateur

Billion

Billion Router Manuel utilisateur

Billion

Billion BiPAC 7401VP/VGP Manuel utilisateur

Billion

Billion 810VGTX Manuel utilisateur

Billion

Billion BiPAC 7402X Series Manuel utilisateur

Billion

Billion BiPAC 5200G R4 Series Manuel utilisateur

Billion

Billion BiPAC 7300NX Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

Billion

Billion BiPAC 8200N Manuel utilisateur

Billion

Billion BiPAC 8500 Manuel utilisateur

Billion

Billion Modem/Router ADSL BIPAC-7100S Manuel utilisateur

Billion

Billion BiPAC 5200W Manuel utilisateur

Billion

Billion BiPAC 8500 Manuel utilisateur

Billion

Billion myGuard 7500GL Manuel utilisateur

Billion

Billion BILLION BIPAC-7500GL Manuel utilisateur

Billion

Billion BiPAC 8500 Manuel utilisateur

Billion

Billion BiPAC 7800(N) Manuel utilisateur

Billion

Billion 7560 Manuel utilisateur

Billion

Billion BiPAC 7402NX Manuel utilisateur

Billion

Billion BIPAC-7402 Manuel utilisateur

Billion

Billion BiPAC 7100 Manuel utilisateur

Billion

Billion BiPAC 4700ZU Manuel utilisateur

Billion

Billion BiPAC 7700N Manuel utilisateur

Billion

Billion BiPAC 7100SG Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur