BGS technic BGS 8698 Manuel utilisateur

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

BGS 8698

Glow Plug Electrodes Removal Tool Set, M8 / M10

TOOLS

1 Extractor spindle M4 x 0.7 x 100 mm

2 Extractor spindle M4 x 0.7 x 100 mm

3 Extractor spindle M3 x 0.5 x 100 mm

4 Twist drill 3.3 x 140 mm

5 Twist drill 2.5 x 120 mm

6 Screw tap M4 x 0.7

7 Screw tap M3 x 0.5

8 Spindle guide M10 x 1.25

9 Spindle guide M10 x 1

10 Spindle guide M8 x 1

11 Guide bolt M10x1.25 (3.5 mm)

12 Guide bolt M10x1 (3.5 mm)

13 Guide bolt M8x1 (3.5 mm)

14 Guide bolt M8x1 (2.5 mm)

15 Guide bolt M8x1 (2.5 mm)

16 Guide bolt M10 x 1 (4.5 mm)

17 Guide bolt M10 x 1.25 (4.5 mm)

18 Guide bolt M10 x 1.0 (3.5 mm)

19 Guide bolt M10 x 1.25 (3.5 mm)

20 Spindle nut M4 x 0.7

21 Spindle nut M4 x 0.7

22 Spindle nut M3 x 0.5

INTENDED USE

This tool kit is used to dismantle broken glow plug tips.

The included tools are suitable for glow plugs M8x1, M10x1 and M10x1.25.

SAFETY INSTRUCTIONS

•Use the tool for those jobs only for which it was designed.

•Always wear safety goggles and gloves when working with this tool.

•After completion of the repair work, make sure all tools have been removed from the engine

compartment.

•Remove the ignition key to prevent the engine from being inadvertently started.

•Do not use the tool if any parts are missing or damaged.

USE

Glow plug bodies with hexagonal drive and electrical

connection can be dismantled.

After breaking, the glow plug tip stays in

the cylinder head and can only be

removed by means of this tool or after

dismantling the cylinder head.

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

Install suitable guide bolt (11-19) for drilling.

The guide bolt must be chosen according to the length, inside diameter

and diameter of the thread or drill.

Bore up the glow plug tip with an appropriate twist drill.

The size of the twist drill depends on the glow plug tip.

Twist drill 2.5 x 120 mm (5)

Twist drill 3.3 x 140 mm (4)

Remove the guide bolt and using suitable tap to make a thread into the

glow plug tip.

The size of the tap depends on the size of the previously used twist

drill.

Tap M3 x 0.5 (7) at twist drill 2.5 x 120 mm

Tap M4 x 0.7 (6) at twist drill 3.3 x 140 mm

Mount the extractor spindle into the thread of the glow plug tip.

Extractor spindle M4 x 0.7 x 100 mm (1 / 2)

Extractor spindle M3 x 0.5 x 100 mm (3)

Mount the spindle nut (20 / 21 / 22) onto the extractor spindle and

screw the nut against the spindle guide, by using suitable tools.

The glow plug tip is pulling out upwards and can finally be removed

from the extractor spindle.

Table des matières

Autres manuels BGS technic Outils électriques

BGS technic

BGS technic BGS 8978 Manuel utilisateur

BGS technic

BGS technic 8717 Manuel utilisateur

BGS technic

BGS technic BGS 3514 Manuel utilisateur

BGS technic

BGS technic 9373 Manuel utilisateur

BGS technic

BGS technic 963 Manuel utilisateur

BGS technic

BGS technic 7729 Manuel utilisateur

BGS technic

BGS technic 72088 Manuel utilisateur

BGS technic

BGS technic 8511 Manuel utilisateur

BGS technic

BGS technic 62625 Manuel utilisateur

BGS technic

BGS technic 3229 Manuel utilisateur

BGS technic

BGS technic 8782 Manuel utilisateur

BGS technic

BGS technic 566 Manuel utilisateur

BGS technic

BGS technic 8725 Manuel utilisateur

BGS technic

BGS technic 9444 Manuel utilisateur

BGS technic

BGS technic 72118 Manuel utilisateur

BGS technic

BGS technic 959 Manuel utilisateur

BGS technic

BGS technic 8231 Manuel utilisateur

BGS technic

BGS technic 62635 Instructions d'installation et d'utilisation

BGS technic

BGS technic 1708 Manuel utilisateur

BGS technic

BGS technic 7177 Manuel utilisateur

BGS technic

BGS technic 8219 Manuel utilisateur

BGS technic

BGS technic 8261 Manuel utilisateur

BGS technic

BGS technic 70111 Manuel utilisateur

BGS technic

BGS technic 3239 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel