7
01：SE T M IC START VO L ：0 dB - 80dB
02：SE T M IC MAX VOL ：0d B - 8 0dB
03：SE T M U SATRT VOL ：0 d B - 80dB
04：SE T M U MAX VO L ：0 dB - 80dB
05：SET EFF SATR T V OL ：0dB - 80d B
06：SET EFF MAX V O L ：0dB - 80dB
07：SET music mode/microphone mode/effect mode in boot mode
5)Setting part
Long press the MUS-C button on the panel to enter the start-up mode interface of setting
MUSIC/microphone/effect. Then press the corresponding music mode/microphone mode/
effect mode button to set the boot mode.
Long press the EXCITER button on the panel to enter the interface for changing audio
source input. In this interface, press the EXCITER button repeatedly to change audio source
input.
Long press the EFF-C button on the panel to enter the interface of setting the maximum
volume of music/microphone/effect, and then rotate the corresponding volume encoder to
set the maximum volume
Long press the MIC-C button on the panel to enter the interface of setting the maximum
volume of music/microphone/effect, and then rotate the corresponding volume encoder to
set the maximum volume
6)Restore factory Settings
Under the normal working state of the front-stage effector, long press FBX button, rotate the
effect volume encoder, and when the screen displays “y”, press FBX button again to restore
the factory Settings.When “n” is displayed on the screen, exit and restore the factory Settings.
7)Screen lock
Press LOCK+Music+EX on the remote control to lock the screen. Press LOCK+Music+EX to
unlock the screen.
Note: There is only effect volume, microphone volume and music volume can be adjusted
when locked.
8)Auxiliary functions (connecting software)
When the mouse and keyboard are inactive, the current effect parameters will be automatically
backed up to the software installation directory (DATA) folder.
Note: automatic backup can be set for 1-5 minutes. If it is not moved for a long time, DATA
backup will be overwritten until the last state.
