BenQ SNS21 Manuel utilisateur

Safety precautions Getting started Screen assembly Screen mounting

Digital Projector

Installation Guide

Ambient Light Rejecting Screen | SNS21

IMPORTANT

To install the product properly,

you are strongly recommended

to follow the steps and safety

precautions in this document.

V 1.00

How-to video

Installation guide

Safety precautions Getting started Screen assembly Screen mounting

Topics

Safety precautions

The screen frames may be sharp. Hold the

parts carefully to avoid possible personal

injury or damage to the floor/product.

Make sure the wall for screen mounting

is stable enough to support the weight of

your ambient light rejecting (ALR) screen.

Never fold the screen material. Avoid

any scratches or wrinkles on the screen

material.

To protect the screen, always wear gloves

before touching or moving the screen

material.

Installation tips

Fix all screws halfway so you can make

adjustments easily. Tighten all screws after

adjustments.

Use appropriate tools to fix different

screws.

Fix screws halfway Tighten after adjustment

Safety precautions

Installation tips

Getting started

Screen assembly

Wall mounting

Screen cleaning

Product support

Safety precautions Getting started Screen assembly Screen mounting

Note

• In the illustrations of this document, steps to complete a task are numbered with 1, and order of

installation is marked with

• Items in the package are labeled and mentioned by English letters.

• Illustrations in this document are for reference only. The actual content may vary by the product

supplied for your region.

Getting started

1Prepare the installation space. It should be at least 450 cm x 260 cm with a blanket to protect your floor.

Blanket for protection

177.16” (450 cm)

102.36”

(260 cm)

2Open the package. Start with reading the installation guide. Do not roll out the screen material yet.

Installation

Guide

Installation

Guide

Most of the package contents are inside the rolled screen material. Take package contets out. Be

careful not to fold or scratch the screen material.

Safety precautions Getting started Screen assembly Screen mounting

4Check all package contents.

All package contents

D IF BB FI D

C C

Kx 30 P x 4 U x 2

Lx 24 Q x 2 V x 8

Mx 26 R x 1 Level x 1

Nx 26 S x 2

Installation

Guide Installation

Guide

x 1

Ox 1 T x 2

Safety precautions Getting started Screen assembly Screen mounting

Screen assembly

Box contents for screen assembly

No. Name Picture Quantity

A Long inner frame 4

B Short inner frame 2

C Bracket 4

D Long fiberglass rod 2

E Short fiberglass rod 4

F Long edge trim 2

G Short edge trim 4

H Long outer frame 4

I Short outer frame 2

J Center support bar 1

K M5 x 10 screw 30

L M4 x 4 screw 24

MM4 x 60 screw with washer and

spring 26

N Nuts 26

O Screen material 1

P Corner sleeve 4

Q 3mm hex wrench 2

R Phillips screwdriver 1

S Gloves 2 pairs

Safety precautions Getting started Screen assembly Screen mounting

1. Inner frame assembly.

C C

Connect the left and right parts of the long

inner frame (A). Fasten them with three M5x10

screws (K).

Complete the inner frame assembly of two

long sides.

Insert the bracket (C) to the short inner frame

(B). Fasten them with two M5x10 screws (K).

Complete the inner frame assembly of two

short sides.

Safety precautions Getting started Screen assembly Screen mounting

Align the short inner frame (B) with the brackets (C) on both ends to the long inner

frames (A) together. Fasten them together with M5 x 10 screws (K). Follow the

illustrations to install the other short side and make the inner frame a square.

Align the center support bar (J) to the screw holes on the upper and lower inner

frames. Fasten the center support bar (J) with M4 x 4 screws (L).

5The inner frame is a square now. Leave it aside and free the space for screen material

installation.

Safety precautions Getting started Screen assembly Screen mounting

2. Screen material installation.

Wear the gloves (S) to protect the screen surface.

Roll out the screen material together with the protection of the supplied nonwoven

sheet carefully. The front side of the screen material is facing downwards. It should

be protected by the protection sheet at all times. Do not remove the UP sticker from

the back of the screen material. You will need the indication of the right screen

direction during installation.

F FD D

Insert the fiberglass rods (D & E) through the

openings on the screen material edges. Follow

the illustration to complete the long and the short

sides.

D & E

Snap the edge trims (F & G) to the screen material

edges to hold the screen material and the

fiberglass rods together. Follow the illustration to

complete the long and the short sides.

D & E

F & G

How-to video

Screen assembly

Safety precautions Getting started Screen assembly Screen mounting

5While the screen material is still placed and facing downards on the floor, place the assembled inner

frame gently on top of the screen material. Adjust the edge trims (F & G) so they are alignted with the

inner frame on the same side.

Insert nuts (N) to the edge trims as illustrated. Insert the number of nuts to each side as specified in the

illustration. That will be 8 nuts on each long side, and 4 nuts on each short side. Slide the nuts evenly to

align with the screw holes inside each inner frame as illustrated by the circles.

N x 8

N x 4

N x 8

N x 4

NF & G

F & G

7Flip the trims back towards the inner frame.

Safety precautions Getting started Screen assembly Screen mounting

8Fix the inner frame with the edge trim using the M4 x 60 screws (M). The screws should be fixed from

the screw holes inside the frame all the way out to the nuts just inserted into the edge trims. Follow the

order specified in the illustration to complete fixing 24 screws. Start from the middle of each side (as

indicated by

) in order to stretch the screen material properly.

Note

A standard set of M4 x 60 screw (M) comes with a

screw, a washer and a spring. Check and remove the

cap before use.

UPUPUP

1 2 12 18 23111724

4 3 9 19 22102021

9Lift the screen material and the frame carefully without touching the screen surface. Check if the screen

material is properly stretched.

To adjuist the stretch, work from the screws.

Once the adjustment is done, lay down the screen gently facing downward again (with the protection of

the supplied nonwoven sheet). Secure all screws.

Table des matières

Autres manuels BenQ Projecteur

BenQ

BenQ LX820ST Manuel utilisateur

BenQ

BenQ W1250 Manuel utilisateur

BenQ

BenQ MP730 - WXGA DLP Projector Manuel utilisateur

BenQ

BenQ GV11 Manuel utilisateur

BenQ

BenQ Home Entertainment Series Manuel utilisateur

BenQ

BenQ LX890USTD Manuel utilisateur

BenQ

BenQ Mainstream Series Manuel utilisateur

BenQ

BenQ MX812ST Manuel utilisateur

BenQ

BenQ LW650 Manuel utilisateur

BenQ

BenQ TK800M Manuel utilisateur

BenQ

BenQ MX816ST Manuel utilisateur

BenQ

BenQ MS517 Manuel utilisateur

BenQ

BenQ SP830 - WXGA DLP Projector Manuel utilisateur

BenQ

BenQ LK954ST Manuel utilisateur

BenQ

BenQ LK952 Manuel utilisateur

BenQ

BenQ Joybee GP3 Manuel utilisateur

BenQ

BenQ MX618ST Manuel d'utilisation et d'entretien

BenQ

BenQ MS531 Manuel utilisateur

BenQ

BenQ TH670 Manuel utilisateur

BenQ

BenQ W1120 Manuel utilisateur

BenQ

BenQ LU9750 Manuel utilisateur

BenQ

BenQ EH620 Manuel utilisateur

BenQ

BenQ TH685P Manuel utilisateur

BenQ

BenQ HT5550 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur