BenQ PB2140/PB2240 Manuel utilisateur

Welcome

PB2140 / PB2240 Digital Projector

Mobile Series

User’s Manual

duced, transmitted, transcribed, stored in a retrieval system or translated into any language or com-

puter language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,

manual or otherwise, without the prior written permission of this company.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect

to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any

particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to

make changes from time to time in the contents hereof without obligation of this company to notify

any person of such revision or changes.

*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are copy-

rights of their respective companies or organizations.

Table of Contents iii

Table of Contents

Important Safety Instructions ............................... 1

Introduction ........................................................... 4

Projector Features ................................................................ 4

Shipping Contents ............................................................... 5

Optional Accessories ......................................................................................6

Projector Exterior View ....................................................... 6

Front / Upper Side ..........................................................................................6

Rear Side .........................................................................................................6

Bottom Side ....................................................................................................6

Controls and Functions ...................................................... 7

External Control Panel ...................................................................................7

Remote Control Description .........................................................................8

Remote Control Effective Range ...................................................................9

Installing or Replacing the Battery ................................................................9

Connection........................................................... 10

Connecting to a Laptop or Desktop Computer ............... 10

Connecting Equipment to the Component Video Input 11

Connecting Video and S-Video Devices .......................... 11

Installation............................................................ 13

Choosing a Location .......................................................... 13

Adjusting the Height ......................................................... 14

Screen Size .......................................................................... 14

Operation ............................................................. 16

Start Up .............................................................................. 16

Shutdown ........................................................................... 17

Digital Keystone Correction ............................................. 18

Source Selection ................................................................. 19

Auto Adjustment ............................................................... 19

Blank .................................................................................. 20

Zoom / Focusing ................................................................ 20

Menu Operation ................................................................ 21

Menu System ................................................................................................21

Using the Menus ...........................................................................................22

1. Picture Menu ............................................................................................23

Table of Contentsiv

2. Pro-Picture Menu .................................................................................... 25

3. Setting Menu ............................................................................................ 26

4. Advance Menu ......................................................................................... 27

5. Information Menu ................................................................................... 28

Maintenance ......................................................... 29

Cleaning the Lens ......................................................................................... 29

Cleaning the Projector Case ........................................................................ 29

Storing the Projector ................................................................................... 29

Transporting the projector .......................................................................... 29

Lamp Information .............................................................30

Warning Message ......................................................................................... 30

Replacing the Lamp ..................................................................................... 30

Temp Information ....................................................................................... 32

Indicators ..................................................................................................... 32

Service Information ...........................................................34

Accessories (included in the standard package) ......................................... 34

Optional Accessories (not included in the standard package) .................. 34

Ordering Parts or Getting Information ...................................................... 34

Troubleshooting................................................... 35

Specifications........................................................ 36

Projector Specifications .....................................................36

Timing Chart ......................................................................37

Supported Timing for PC Input ................................................................. 37

Supported Timing for Component-YPbPr Input ...................................... 37

Supported Timing for Video and S-Video Inputs ..................................... 37

Dimensions........................................................... 38

Warranty............................................................... 39

Limited Warranty ...............................................................39

Regulation Statements ......................................... 40

FCC Statement ...................................................................40

EEC Statement ...................................................................40

MIC Statement ...................................................................40

Important Safety Instructions 1

Important Safety Instructions

Your BenQ projector is designed and tested to meet the latest standards for safety of infor-

mation technology equipment. However, to ensure safe use of this product, it is important

that you follow the instructions mentioned in this manual and marked on the product.

Caution

•To prevent shock, do not open the

cabinet. There are no user serviceable

parts inside.

•Please read this user’s manual before

you operate your projector. Save this

user’s manual for future reference.

•Do not look straight at the projector

lens during operation. The intense

light beam may damage your eyes.

•Refer servicing to qualified service

personnel.

•Always open the lens shutter or

remove the lens cap when the

projector lamp is on.

• In some countries, the line voltage is

NOT stable. This projector is designed

to operate safely within a mains

voltage between 100 to 240 volts AC,

but could fail if power cuts or surges of

±10 volts occur. In areas where the

mains voltage may fluctuate or cut out,

it is recommended that you connect

your projector through a power

stabilizer, surge protector or

uninterruptible power supply (UPS).

Important Safety Instructions2

Safety Instructions

1. The lamp becomes extremely hot

during operation. Allow the projec-

tor to cool for approximately 45

minutes prior to removing the lamp

assembly for replacement.

2. Do not operate lamps beyond the

rated lamp life. Excessive operation

of lamps beyond the rated life could

cause them to break on rare occa-

sions.

3. Never replace the lamp assembly or

any electronic components unless

the projector is unplugged.

4. Do not place this product on an

unstable cart, stand, or table. The

product may fall, sustaining serious

damage.

5. To reduce the risk of electric shock,

do not disassemble this appliance.

Take it to a qualified technician

when service or repair is required.

Incorrect reassembly can cause mal-

function of the projector or electric

shock when the appliance is subse-

quently used.

6. This product is capable of displaying

inverted images for ceiling mount

installation. Please use BenQ’s Ceil-

ing Mounting Kit for mounting the

unit and ensure it is securely

installed.

Important Safety Instructions 3

Safety Instructions (Continued)

7. Do not block the ventilation holes.

- Do not place this unit on a blanket,

bedding or any other soft surface.

- Do not cover this unit with a cloth or any

other item.

- Do not place inflammables near the

projector.

If the ventilation holes are seriously

obstructed, overheating inside the unit

may result in a fire.

8. Do not place this unit in any of the fol-

lowing environments.

- Space where is poorly ventilated or

confined. Allow at least 50 cm clearance

from walls and free flow of air around the

projector.

- Locations where temperatures may

become excessively high, such as the

inside of a car with all windows rolled up.

- Locations where excessive humidity, dust,

or cigarette smoke may contaminate

optical components, shortening the

projector’s life span and darkening the

image.

- Locations near fire alarms

- Locations with an ambient temperature

above 35°C / 95°F

9. Always place the unit on a level, hori-

zontal surface during operation.

- Do not use if tilted at an angle of more

than 10 degrees left to right, nor at angle

of more than 15 degrees front to back.

Using the unit when it is not fully

horizontal may cause a malfunction of, or

damage to, the lamp.

10. Do not stand the unit on end vertically.

Doing so may cause the unit to fall over,

causing injury or resulting in damage to

the unit.

11. Do not step on this unit or place any

objects upon it.

Besides probable physical damage to the

unit, doing so may result in accidents and

possible injury.

12. Do not place liquids near or on the pro-

jector. Liquids spilled into the projector

may cause it to fail. If the projector does

become wet, disconnect it from the

power supply’s wall socket and call

BenQ to have the projector serviced.

Introduction4

Introduction

Projector Features

The projector integrates high-performance optical engine projection and a user-friendly

design to deliver high reliability and ease of use.

The projector offers the following features:

• Compact and portable unit

• High quality manual zoom lens

• One-key auto-adjustment to display the best picture quality

• Digital keystone correction to correct distorted images

• Adjustable color balance control for data/video display

• Ultra-high brightness projection lamp

• Ability to display 16.7 million colors

• On-screen menus in 10 languages: English, French, German, Italian, Spanish, Russian,

Traditional Chinese, Simplified Chinese, Japanese and Korean.

• Switchable normal and Economic modes to reduce the power consumption

• Powerful AV function to provide high quality AV picture

• HDTV compatibility (YPbPr)

Note: The brightness of the projected image will vary depending on the ambient lighting con-

ditions and contrast/brightness settings.

Introduction 5

Shipping Contents

The projector is shipped with the cables required for connection to a PC and to video equip-

ment. Carefully unpack and verify that you have all of the items shown below. If any of these

items are missing, please contact your place of purchase.

Projector Soft Carry Case Remote Control User’s Manual

Batteries 3-2 Power Converter User’s Manual CD Quick Start Guide Warranty Booklet

USB Cable S-Video Cable Video Cable VGA CableAudioCable

US EU UK

Pull the tab before using the

remote control.

Power Cord 110V Power Cord 220V Power Cord 240V

Introduction6

Optional Accessories

Projector Exterior View

Front / Upper Side

Rear Side

Bottom Side

1. Macintosh adapter

2. 200W lamp module

3. Ceiling mount kit

4. Wireless Pro

5. Presentation Plus

6. Component Video cable

External control panel

(See page 7for

detailed information.)

Front IR remote sensor

Ventilation grill Front adjuster button

Projection lens

Focus ring and Zoom

ring

AC power cord inlet

Kensington lock hole

Ventilation grill

S-Video jack

Rear IR remote sensor

Audio jack RGBsignal input (PC/

YPbPr/ YCbCr)

USB connector

Video connector

Lamp door

Rear adjuster foot

Front adjuster foot

Front adjuster button

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels BenQ Projecteur

BenQ

BenQ MX806ST Manuel utilisateur

BenQ

BenQ MP610 - SVGA DLP Projector Manuel utilisateur

BenQ

BenQ MW814ST Manuel utilisateur

BenQ

BenQ TK860 Manuel utilisateur

BenQ

BenQ LU9915 Manuel utilisateur

BenQ

BenQ CM00G3 Manuel utilisateur

BenQ

BenQ MP612C - SVGA DLP Projector Manuel utilisateur

BenQ

BenQ MS512H Manuel utilisateur

BenQ

BenQ LK990 Manuel utilisateur

BenQ

BenQ LW720 Manuel d'exploitation et d'entretien

BenQ

BenQ PB8263-XGA Manuel utilisateur

BenQ

BenQ LU9750 Manuel utilisateur

BenQ

BenQ HT2150ST Manuel utilisateur

BenQ

BenQ MP515 - SVGA DLP Projector Manuel utilisateur

BenQ

BenQ TK860i Manuel utilisateur

BenQ

BenQ MP524 Manuel utilisateur

BenQ

BenQ HT4050 Manuel utilisateur

BenQ

BenQ MX808PST Manuel utilisateur

BenQ

BenQ PB8140 - SVGA DLP Projector Manuel utilisateur

BenQ

BenQ MX864UST Manuel utilisateur

BenQ

BenQ MS524E Manuel utilisateur

BenQ

BenQ MP623 - XGA DLP Projector Manuel utilisateur

BenQ

BenQ MX766, MW767, MX822ST Manuel utilisateur

BenQ

BenQ MX819ST Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur