BenQ WM04G4 Manuel utilisateur
Installation Manual
●Be sure to read this manual thoroughly and to do the installation work safely.Keep
this manual available for future reference.
●Sufficient expertise is required for installing this projector wall mount.
●Do not use the projector wall mount for purposes other than for which it is designed.
D：Projection distance
V：Distance between the wall plate and the upper of image
Important Safety
Checking The Installation Position
Checking The Supplied Accessories
D
V
Projection
screen
Wall plate
Projector(with the projector
mounting plate)(1)
Setting plate (1) Wall plate (1)
* Screw f has been locked on the wall plate.
L5Allen key
b
diagrammatic
presentation
NO
designation
c
d
a
5
quantity
5
1
L3Allen key
1
Screw(M6X55)
Φ10mm Anchor bolt
Screw(M4X10)
4
e
Screw(M5X10)
4
f
Be sure to read this manual thoroughly to do the installation work.
3For safety reasons, check the strength of the wall before installation. If the wall is not strong
enough, reinforce it sufficiently before installation.
4Do not make alterations to the projector wall mount.
Do not hit or hang any heavy objects on the projector wall mount. If the projector wall mount is damaged,
stop use and contact a qualified service person immediately.
9
When dismounting the projector from the projector wall mount, be sure to unplug the AC power cord and
other connecting cables beforehand.
8
Use the supplied accessories only. Use of accessories other than those supplied may result in damage to
the projector wall mount.
7
To avoid fire, do not install the projector with the projector wall mount in a humid or excessively dusty place.
Please install this apparatus only on the horizontal surface instead of the slanting one.
5Do not install the projector wall mount on a wall subject to vibration or impact.
Only qualified service personnel (two or more) should carry out installation or dismounting of the projector
from the projector wall mount.
2
* Manufacturer is not liable for any damages or injury caused by mishandling or improper installation.
Use with products heavier than the maximum weights(Weight Capacity： ＜15kg) indicated may
result in instability causing possible injury.
ＥＮＧＬＩＳＨ
Wall plate cover (1)
195mm
235mm
Wall plate
Wall cover
inch
±5°
±5°
±5°
360mm~665mm
141mm
Regulating range
0~40mm
Regulating range
0~30mm
Checking The Installation Position
● According to the scale to determine the screen size .Scale parameters are for
reference only.
mm
ＥＮＧＬＩＳＨ
360mm 380mm 410mm 440mm 470mm 500mm 530mm 560mm
14 4in
1/
75"
77"
80"
82"
85"
90"
92"
95"
97"
100"
XGA
4:3
WXGA
16:10
68"
70"
75"
77"
80"
82"
85"
80"
85"
87"
90"
92"
95"
97"
100"
image
To Set The Projector Wall Mount On The Wall
● According to the scale to determine the installation height of the wall plate .
Scale parameters are for reference only
* You can find this form in the projector packaging.
* Please refer the installation chart in projector UM and QSG for proper installation
evaluation.
.
XGA
4:3
WXGA
16:10
68"
70"
75"
77"
80"
82"
85"
80"
85"
87"
90"
92"
95"
97"
100"
ＥＮＧＬＩＳＨ
To Set The Projector Wall Mount On The Wall
● The bracket is suitable for concrete wall mounting or wooden stud wall.
● Concrete wall mounting thickness must be a minimum 100mm. Anchor bolt and screw
(M6 × 55) are needed to be used for installation.
● Dry-wall mounting thickness must be a minimum 70mm. Only screw(M6 × 55) is needed
to be used for installation, and gypsum board
thickness not greater than 3/8 inch. If the wall
is not strong enough, reinforce it sufficiently
before installation.
● Please contact manufacturer if you have
any questions about mounting surface issue.
>55mm
ø10~11mm b
Concrete wall mounting
Use anchor bolt
>55mm
ø3mm
Dry-wall mounting
Not use anchor bolt
Remove the decorative cover
Loose the screws e
Loose the screws f
c
a
screw (M6 × 55) are needed to be used
for installation in concrete wall mounting
c
f
c
a
screw central
point
When installation on the
wood stud wall,the stud
position of the mount wall
surface shall be defined,
the fixed screw central
point shall be aligned with
the central line of stud.
To set the projector wall mount on the wall Tighten up the screws
screw (M6 × 55) are needed to be used
for installation in dry-wall mounting
ＥＮＧＬＩＳＨ
A
A
B
B
AB
30mm
Adjust the leftward/rightward
slide:30mm
To Set The Projector Wall Mount On The Wall
● Move the mouting plate and adjust the leftward/rightward slide.
● Move the raised Wall plate and adjust the upward/downward slide.
Adjustment direction
A
B
A
B
Adjust the upward/downward
slide:40mm
40mm
Wall cover
Adjustment
direction
To Install The Projector On The Projector Wall Mount
ＥＮＧＬＩＳＨ
To Install The Projector On The Projector Wall Mount
To Adjust The Vertical Tilt
AB
A
B
Adjustment buttons
Adjustment
direction
AB
AB
Adjustment buttons Adjustment direction
To Adjust The Horizontal Roll
● Locking the screw e. ● Please put the power cable and other cables
through the setting plate at the top of the hole.
e
Connect the
power cable
and other cables
to the projector.
The power cable and
other cables through
the Setting plate.
ＥＮＧＬＩＳＨ
Product Information:
To Adjust The Forward/Backward Slide
To Put On The Decorative Cover
AB
A
B
Adjustment buttons
Adjustment direction
A
B
A
B
A
B
d
Adjustment direction
To Adjust The Horizontal Rotation
Net weight: 3.5kg Rated capacity: 15kg
Adjustable angle: Longitudinal inclination、Level angle、Yaw angle±5°(3 directions)
Adjustable range: From the installation plate center horizontal distance 360mm 665mm
Adjustable range for upward/downward slide : 40mm
Adjustable range for leftward/rightward slid: 30mm
ＥＮＧＬＩＳＨ
Table des matières
Autres manuels BenQ Accessoires pour projecteur
BenQ
BenQ PointWrite PT20 Manuel utilisateur
BenQ
BenQ InstaShow WDC10TC Manuel utilisateur
BenQ
BenQ WDC10 InstaShow Guide de référence rapide
BenQ
BenQ ScreenBar Manuel utilisateur
BenQ
BenQ PointWrite Manuel utilisateur
BenQ
BenQ InstaShow X Manuel utilisateur
BenQ
BenQ PointWrite PW30U Manuel utilisateur
BenQ
BenQ RS232 Commands Manuel utilisateur
BenQ
BenQ InstaShow WDC10R Manuel utilisateur
BenQ
BenQ 0.4 Wall Mount-WM04G3 Manuel utilisateur
BenQ
BenQ InstaShow S Manuel utilisateur
BenQ
BenQ LH856UST Manuel utilisateur
BenQ
BenQ LX710 Manuel utilisateur
BenQ
BenQ 0.4 Wall Mount-WM04G3 Manuel utilisateur
BenQ
BenQ InstaShare Manuel utilisateur
BenQ
BenQ PointWrite PW31U Manuel utilisateur
BenQ
BenQ 0.3 Wall Mount Manuel utilisateur
BenQ
BenQ InstaShow VS20 Manuel utilisateur
BenQ
BenQ PT01 Manuel utilisateur
BenQ
BenQ InstaShow WDC10T Manuel utilisateur
